Installation and Instructions

Installation and Instruction

1. This icicle light is suitable for INDOOR AND OUTDOOR USE.
2. The adaptor MUST be installed INDOORS away from weather.
3. Do not position or place near heaters or any other direct sources of heat.
4. This product is suitable for positioning on surfaces which have normal flammability, e.g. wood, plasterboard, masonry. However this does not include highly flammable surfaces (e.g. polystyrene, textiles).
5. Always position cables and extension leads so that they will not be a hazard to the elderly, pets and children.
6. DO NOT position this set where it may become covered by other items e.g. curtains, nets or bedding.
7. Ensure the unit(s) is positioned so that you have enough cable to reach an indoor mains power socket.

Warning

• Do not try to remove these non-replaceable bulbs.
• This product is NOT designed for permanent or long term use.
• Only operate this light chain with the supplied adaptor, Model no. JT-EL/FC4.5V3.6W-H4.
• The supplied adaptor is suitable for operation of LED modules only.
• Do not connect this light chain electrically to another chain.
• Do not connect this light chain to the power supply while it is in the packaging.
• If any part of the light set or cable is damage, the light set must be discarded.
• This product is for use as a decoration only. This is not a toy.
• Do not position the light chain where it may be exposed to extreme weather conditions or submerged in water i.e. inside guttering.
• Always switch off the light set or unplug an adaptor if unattended. Do not overload power sockets or extension leads.
• Please refer to packaging or product rating label for product class, specifications and rating.
• DO NOT piece the cable when securing in place, bend or stand on the light chain, as this will damage the bulbs or wiring.

LED Bulbs

This light set is constructed with non-replaceable bulbs. DO NOT attempt to replace any of the bulbs in the light set.