Schleich Horse Club Stable Assembly Instructions (42710)

WARNING: CHOKING HAZARD – Small parts Not for children under 3 years

Note: Warnings are also provided in multiple other languages.

Product Overview

This document provides assembly instructions for the Schleich Horse Club Stable playset, model 42710. The playset allows children to build a detailed horse stable environment.

Parts List

Note: The parts list is based on the visual identification from the provided document.

For any discrepancies or missing parts, please contact Schleich customer service at consumer@schleich-s.de or visit www.schleich-s.com/service.

Assembly Instructions

Step 1: Assemble Base

Take part 10155718 and part 10155719. Align the interlocking edges and press them together until they connect with a [click] sound.

Step 2: Attach Main Structure

Take part 10155721 (main stable entrance frame). Align it with the assembled base from Step 1. Arrows indicate two connection points. Press down firmly at points labeled [1] and [2] until it clicks.

Step 3: Insert Floor Mat

Take part 10155720 (yellow floor mat). Place it onto the designated area within the stable structure. Arrows indicate placement. A [click] sound may be heard upon proper seating.

Step 4: Attach Roof

Take part 10155722 (red roof section). Align it with the top of the stable structure and press down until it clicks into place.

Step 5: Assemble First Fence Section

Take part 10155723 (grey fence frame). Take part 10155724 (brown wooden panel). Insert the panel into the slots on the fence frame as shown by [arrow 1]. Then, fold the fence frame and insert the panel into the second set of slots as shown by [arrow 2]. The completed section is shown in view [3].

Step 6: Assemble Second Fence Section

Take part 10155725 (grey fence frame). Take part 10155724 (brown wooden panel). Repeat the process from Step 5: insert the panel into the slots on the fence frame as shown by [arrow 1]. Then, fold the fence frame and insert the panel into the second set of slots as shown by [arrow 2]. The completed section is shown in view [3].

Step 7: Attach Panel to Entrance Frame

Take part 10155727 (grey stable entrance frame). Take part 10155728 (brown wooden panel). Align the panel with the frame and press until it clicks.

Step 8: Connect First Fence to Base

Take the assembled fence section from Step 5. Align its base with the main stable base assembly as indicated by [arrows 1] and [2]. Press down until it clicks.

Step 9: Connect Second Fence to Base

Take the assembled fence section from Step 6. Align its base with the main stable base assembly as indicated by [arrows 1] and [2]. Press down until it clicks.

Step 10: Attach Front Gate

Take the front gate assembly (prepared in Step 12). Align it with the front opening of the stable structure as indicated by the [arrows]. Press until it clicks.

Step 11: Apply Stickers and Final View

Apply the stickers (part 10162110) to the designated areas on the stable. The diagram shows the completed stable from a top-down perspective and a [90 degree rotation] view.

Step 12: Prepare Turquoise Door Panels

Take part 10110918 (door handle/hinge piece) and part 10131238 (turquoise door panel). Attach the handle/hinge piece to the door panel as shown by the [arrow].

Step 13: Attach Turquoise Doors

Take the assembled turquoise door panels (part 10131237 is also shown, likely the second panel). Align them with the stable entrance and press until they click. Stickers (part 10162110) are also shown for application.

Step 14: Assemble and Attach Outer Fences

Assemble two longer fence lines using the parts provided (two sections of 10155729, marked [2x], and two sections of 10155730). Attach these fence lines to the sides of the stable area as indicated by the [click] prompts. A [90 degree rotation] view is provided.

Step 15: Attach Accessories

Attach the hay feeder (part 10155840) to the fence. Attach the water trough (part 10155841) inside the stable. Attach the tool holder (part 10110950) to the fence. A close-up view shows the feeder attachment.

Step 16: Assemble Figure

Assemble the figure (part 10155156) by connecting the leg parts, torso, and head in sequence [1], [2], [3]. Attach the hairpiece. A completed figure is shown.

Completed Playset

The assembled Schleich Horse Club Stable playset features a main stable building with a red roof, turquoise doors, and wooden paneling. It includes fences, a hay feeder, a water trough, and a tool holder. The playset is designed to be used with figures like the included Hannah figure (10155156) and horse (10131428).