VIVOHOME USER MANUAL CERAMIC HOB

IMPORTANT

1. After removing the appliance from the packaging, ensure that the item is not damaged. In case of any doubts with the product, please consult the supplier or a qualified engineer.
2. The packaging materials must be removed and placed out of reach of children to avoid danger. These materials should be handled and disposed of based on your local regulations.
3. Do not attempt to alter the technical features of the appliance, as this may result in dangerous accidents.
4. Whenever you decide to get rid of the appliance or replace it with a new one, before scrapping, we recommend you to make it inoperative and harmless to meet the health and antipollution regulations.

IMPORTANT PRECAUTIONS AND RECOMMENDATIONS FOR USING THE CERAMIC HOB

1. Do not touch the appliance with wet hand or wet feet.
2. Do not use the appliance with bare feet.
3. Do not let children or the disabled operate the appliance without direct supervision.
4. Disconnect the appliance from electric supply before carrying out any cleaning or maintenance operation.
5. Never try to remove the plug from the mains supply socket by pulling the cable.
6. Do not allow children to approach the glass of the hob while it is in use, as high temperature can be reached.
7. If the appliance breaks down or does not work properly, switch off the device and do not tamper with it. All repairs including those to the mains supply should be done by an approved service agent, and you should insist that only original components be used. Failure to follow the above advice can affect the safety of your appliance.

WARNING!

1. The appliance can be used by children aged from 12 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements inside the oven.
3. A steam cleaner should not be used.
4. Children less than 12 years of age shall be kept away unless continuously supervised.
5. Care should be taken to avoid touching heating elements.
6. If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
7. Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. Warning: Danger of fire: do not store items on the cooking surfaces.
8. In order to prevent accidental tipping of the appliance, for example by a child climbing onto the open oven door, the stabilizing means must be installed. Refer to the instruction for installation.
9. Accessible parts may become hot during use. Young children should be kept away.
10. The appliance is not intended to be operated by means of external timer or separated remote-control system.
11. Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

FIRST TIME USE

When you use the device for the first time there may be emanations of fumes or odors. This is normal. Because of the adhesive insulating panel around the hot plate, heating will cause the adhesive to dissolve into a harmless fume.

MODELS

C43-M

A diagram shows the layout of the ceramic hob with four cooking zones and a control panel with five knobs and indicator lights.

TECHNICAL PARAMETERS

REQUIREMENTS

Hobs which have suitable voltage and frequency require independent and correct connection with power supply circuit. The circuit must install complete breaker and fuse and conform to requirements of rated power which marked on the nameplate (nameplate is located the side of bottom shell).

WARNING! Shock Hazard

1. The appliance must be grounded.
2. Before permanently earthing the appliance, it should not be connected to the power supply.
3. Before conducting any electricity, disconnect the power source.
4. This appliance must connect with an earthed permanent metal electric system, or its earth terminal or its wire connects with a grounding connector.
5. Do not allow the gaspipe line to be earthed.

Once against above requirements, it may cause personal injury or electric shock.

A wiring diagram shows the connection of the appliance to the power supply, indicating Live (L), Neutral (N), and Ground (GND) connections. It specifies "Mod. C43-M 3X4mm2 32A".

INSTALLATION

IMPORTANT

1. The appliance should be installed and debugged by a qualified installation technician.
2. The appliance should be earthed. The rated power of the power supply, plug and socket should be the same as the rated power on the technical nameplate. The thickness of the power's connection must be suited to hob's power. There should be one all-pole disconnect device with a contact distance of 3mm.
3. The appliance must be installed in the fireproof cabinet, and the cabinet wall should not be higher than the working face and can endure the temperature 80°C more than the room temperature.
4. Don't install the appliance near the matter which is not fireproof such as purdah.
5. The power line should be connected after the appliance have been installed. Brown line - live wire, blue line - null line, yellow-green line - earth.
6. The manufacturer declines all responsibility for damage resulting from incorrect earthing, incompliance with electrical regulations and national safety requirements.
7. Drill the hole on the cook-tops as following drawings, install the hob, make sure it is firm enough. (unit: mm)
8. Do not put the combustible and explosive materials close to the appliance.

A diagram illustrates the dimensions for cutting a hole in the countertop for the hob, showing measurements such as 750mm, 510mm, 480mm, 490mm, 670mm, 680mm, 49mm, 55mm, and 30mm. Another diagram shows the installation of glass sealant around the hob and indicates correct and incorrect methods for securing the appliance, along with clearance requirements of >130mm and >760mm, and 5cm.

OPERATION DIRECTION

After installing, inserting the plug into the socket steadily and safely. Hot plate will heat the food in a constant temperature during it is working.

CONTROL PANEL

A diagram shows the control panel of the VIVOHOME Ceramic Hob, Model C43-M, featuring five rotary knobs for controlling the burners and a central area with indicator lights and a timer display. One knob is labeled 'min' and has a range from 0 to 5. Other knobs also have a range from 0 to 5. One knob is specifically for the timer, with a range from 0 to 90 minutes.

CHILD LOCK

Use to prevent unsupervised operation of the hob by little children. The Child Lock indicator light will show on display screen, and the hob can not be operated while the Child Lock is set.

Lock manually - unlock manually:

Lock manually - Press and hold the [lock symbol] button for 1 second, lock indicator light turns on.

Unlock manually - Press and hold the [lock symbol] button for 1 second until the lock indicator light is turned off.

Lock automatically - unlock manually:

• After plugging in, the CHILD LOCK will be set automatically.
• When timer is not set, after 1 minute without operating, the CHILD LOCK will be set automatically. (This function is to prevent unsupervised operation of the hob by little children, after users leave the cooking hob. Please do not think it is a malfunction.)

Unlock manually - Press and hold the [lock symbol] button for 1 second until the lock indicator light is turned off.

TURN ON/OFF THE BURNER POWER & SELECT THE POWER & SELECT THE HEATING CIRCLES

When plugging in and the child lock is on unlocking status, rotate the knob to turn on/off the burner. When turning on the burner, the burner indicator light is turned on. When turning off the burner, the burner indicator light is turned off.

SET THE TIMER

When the burner power is turned on and the child lock is on unlocking status, rotate the timer knob from 0 position to any other position, to activate the timer, you can rotate to set the timer (from 3 minute to 90 minutes), and the window will show the timer time accordingly. There are 11 kinds of fixed time (minutes) 3 → 5 → 7 → 10 → 15 → 20 → 30 → 45 → 60 → 75 → 90.

Tips: 0 position is near 90 minutes. Rotate knob from 0 to 90 = Boost into max fixed time.

After setting the timer, the timer starts working immediately.

During timer cooking, if you want to change the timer time, you can rotate the knob into the time position directly, the new timer start working immediately.

After the time finished, there is a beep alarm for 6 seconds, the burners stop working and their indicator lights turned off.

For next burner cooking, you need rotate the burner knob 1-2 times to activate the burner (until its indicator light is turned on.) (This function is for safety. Please do not think it is a malfunction.)

WASTE HEAT DIRECTION

• After the heat plate stops working, if the temperature for the surface of panel is higher than 80°C, it will show "H" (High temperature. Please do not touch the hot burner area).
• After the heat plate stops working, if the temperature for the surface of panel is lower than 80°C, it will be no display.

CIRCUIT DIAGRAM

A circuit diagram shows the internal wiring of the ceramic hob, connecting the Power Board to the Control Panel and the heating elements.

APPROPRIATE COOKWARE FOR CERAMIC BURNER

All pots made of resisting high temperature materials, such as, stainless steel, enamel, iron, ceramic, copper, glass, clay pot.

Diagrams illustrate various types of appropriate cookware: Enamel Iron pot, Aluminum pot, Cauldron pan, Iron pot, Deep-fry pan, Glass/Ceramic pot, Iron Plate.

INAPPROPRIATE COOKWARE FOR CERAMIC BURNER

Concave, convex or rounded bottom pots, base diameter < 12cm, pots with legs, heat-resistant container.

Diagrams illustrate inappropriate cookware: rounded bottom pots, base diameter < 12cm, Pots with leg, heat-resistant container.

ELIMINATE PROBLEMS

NOTE:

To continuously improve its products, VIVOHOME reserves the right to modify this information without prior notification. Please contact customer service via support@vivohome.com with any questions, comments, or concerns. Thank you for using VIVOHOME products in your home!

Thank You For Purchasing From VIVOHOME

support@vivohome.com

www.vivohome.com

MADE IN CHINA