Rabbit Air MinusA2 Ultra Quiet Air Purifier

Hello there!

? Meet your brand new MinusA2®! We hope that this stylish bundle of cleanliness is just what you've been looking for. Be sure to get familiar with this newest addition to your home, by exploring all of its features in the enclosed booklet and on our website. If you have any questions just give us a call, anytime. We love to hear from you!

General Safety Information About Your MinusA2 Air Purifier

⚠️ Caution: When using electrical appliances, observe the following basic precautions to reduce the risk of fire, electric shock, and injury:

• Please read all tips and warnings before using your Rabbit Air® purifier.
• Use only as directed by the Owner's Manual.
• Please observe extreme caution when using the air purifier in close proximity to children.
• Rabbit Air purifiers are for indoor use only.
• The Rabbit Air purifier is not intended for use in bathrooms, laundry areas, or other damp indoor environments. Keep the Rabbit Air purifier away from water at all times.
• Do not use the Rabbit Air purifier near fireplaces or in areas where flammable or combustible products or vapors may be present.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• This product complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume (ppmv) in a 24-hour period. The Health Canada Guideline 2010 recommends that the Maximum exposure limit, based on an averaging time of 8 hours, is 0.020 ppmv or less when tested in a Sealed, controlled room approximately 30 m³.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model's CADR for Smoke and the electrical energy it consumes, or CADR/Watt.

Electrical Safety Instructions

• The Rabbit Air purifier is designed for use in a 120V outlet only.
• Turn off your Rabbit Air purifier before unplugging it from the power outlet.
• Unplug the Rabbit Air purifier from the power outlet when not in use and before servicing or cleaning the unit.
• To reduce the risk of electric shock, the Rabbit Air purifier has a polarized plug, which means it will fit into a polarized outlet only one way. If the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. Do not alter the plug in any way.
• To avoid electric shock, do not touch the air purifier or its power plug with wet hands.
• Keep the electrical cord away from heated surfaces at all times.
• If the cord or plug appears damaged, return the unit immediately to an authorized service facility for examination and repair.
• Any attempts to repair the Rabbit Air purifier without written permission from Rabbit Air will void the warranty and could cause serious personal injury to the user and/or result in severe damage to the unit.
• Do not pull, carry, lift, or drag the Rabbit Air purifier by pulling its power cord. Remove the power plug from its outlet by grasping the plug and pulling gently.
• When the Rabbit Air purifier is plugged into a power outlet, keep all fingers, body parts, hair, jewelry, and loose clothing away from the openings.

Operation Guidelines

• Do not block the air intake or air outlet.
• Do not use the Rabbit Air purifier on or around hot surfaces.
• Do not use the Rabbit Air purifier in a room where it may come into contact with steam.
• Do not operate the Rabbit Air purifier on its side.
• Do not install the Rabbit Air purifier in greasy or damp environments.
• Do not use detergent or soap to clean the Rabbit Air purifier.
• Do not operate the Rabbit Air purifier without filters.
• Do not wash and reuse the filters except for the washable Pre-Filter.
• When transporting the Rabbit Air purifier, always hold the handle on the back of the unit.

A childproof feature pauses air purifier operation when the front panel is removed.

Installation Guidelines

• Avoid putting the Rabbit Air purifier in a place where the air intake or air outlet could become clogged with dirt.
• Make sure the Air Purifier has at least two feet of clearance from the air outlet and eight inches of clearance from the air intake on either side.

Meet your MinusA2

Front view

The front view shows the air purifier with the following labeled components:

• Wireless Indicator
• Mood Light ?
• Air Intake (Around all sides of front panel)
• Control Panel/ Display Panel
• Particle Sensor ?
• Light Sensor ☀️
• Air Quality Indicator ?
• Odor Sensor ?
• Removable base for wall-mounting

Back view

The back view shows the air purifier with the following labeled components:

• Handle
• Power Cord
• Bracket Holder
• Air Outlet
• Removable Base Screws

Connecting with a Smartphone or Tablet

Requires iOS or Android device with Bluetooth or a 2.4Ghz WiFi network.

1. ? Download the Rabbit Air app to your smartphone or tablet.
2. Use your existing customer login or create a new account.
3. Select "Setup new purifier" or "Find existing purifier" and follow the steps on the screen.
4. Now you can monitor your air quality and control your air purifier.

For more information, visit us at www.rabbitair.com/wireless-faq

Meet the Filters

The air purifier uses a multi-stage filtration system:

• Pre-Filter (washable)
• Medium Filter
• Customized Filter
• BioGS™ HEPA Filter
• Charcoal Based Activated Carbon Filter

A diagram illustrates the filter layers and their placement within the filter case.

Know your Customized Filter

Rabbit Air offers various customized filters:

• Toxin Absorber: Front color: Purple, Back color: Gray
• Germ Defense: Front color: Purple & Yellow, Back color: Yellow
• Pet Allergy: Front color: Purple & Rose, Back color: Rose
• Odor Remover: Front color: Black (coated material), Back color: Black

Control Panel / Operation Modes

Speed and Wireless Reset

• Short Press (Speed): Changes the fan speed through the following sequence: Silent, Low, Medium, High, Turbo.
• Press and Hold (Wireless Reset): Initiates or resets wireless settings to connect the air purifier to a 2.4 GHz wireless network using a mobile device. Download the Rabbit Air App to your device and follow setup instructions. The Wireless Indicator ? will flash during setup and remain illuminated once connected.

Mode and Filter Reset

• Short Press (Mode): Changes the operation mode to Auto Mode or Pollen Mode.
• Pollen Mode: Fan speed adjusts based on air quality. The Mood Light ? cycles through blue, purple, light purple, and pink.
• Auto Mode: Fan speed adjusts based on air quality, unless in Sleep Lighting mode (fan speed remains Silent). The Mood Light ? is solid blue.
• Press and Hold (Filter Reset): Resets the Filter Replacement Indicator ?. The indicator illuminates when filters need replacement. Press and hold the button after replacing filters until the indicator turns off.

Mood Light and Ion on/off

• Short Press (Mood Light): Turns the Mood Light ? on or off. The color corresponds to the current mode: Manual Speed (Blue), Auto Mode (Blue), Pollen Mode (cycles blue-purple-light purple-pink).
• Press and Hold (Ion): Turns the Negative Ion Generator ⚡ on or off.

Light Sensor (Sleep Lighting)

The Light Sensor ☀️ detects darkness and activates Sleep Lighting after three minutes. In Sleep Lighting, the Mood Light ? and Air Quality Indicator ? turn off. If in Auto Mode, fan speed defaults to Silent Speed to save energy and reduce noise. Sleep Lighting does not override Manual Speed or Pollen Mode fan speeds.

Air Quality Indicator

This indicator ? shows the current air quality detected by the Odor Sensor ? and Particle Sensor. The color shifts from blue (good) to purple, light purple, or red (poor) based on contaminant levels.

Operation Tips

For recommendations on the best speed and mode for your needs, please contact our knowledgeable Customer Care Team at 888.866.8862.

Connecting with your smart phone or tablet

Requires iOS or Android device and a 2.4Ghz WiFi network.

1. Download the Rabbit Air app to your smartphone or tablet.
2. Use your existing customer login or create a new account.
3. Select "Setup new purifier" or "Find existing purifier" and follow the steps on the screen.
4. Monitor your air quality and control your air purifier remotely.

For more information, contact us at www.rabbitair.com/wireless.

Changing the Sensitivity Level of the Sensors

You can adjust the sensitivity of the air quality sensors. They are preset to a standard level by default.

1. Press and hold both the Speed and Mode buttons for three seconds.
2. The Air Quality Indicator ? and Auto Mode Indicator will blink.
3. Press the Speed button to choose the sensitivity level:
• Replace Filters: Low sensitivity
• Pollen Mode: Standard sensitivity
• Auto Mode: High sensitivity
4. Press and hold the Speed and Mode buttons for three seconds to save the sensitivity level. If no action is taken for ten seconds, the selected level is saved automatically.

Cleaning and Maintenance

Always unplug the unit before cleaning or maintenance.

Cleaning the MinusA2

Use a damp cloth to remove stubborn stains and buildup. Avoid commercial cleaning products.

1. Wipe external surfaces with a clean, dry cloth.
2. Clean the air intake and outlet with a soft brush.
3. Remove the front panel and dust it with a dry cloth or soft brush.
4. Dust the Mood Light lens on the back of the panel with a dry cloth, soft brush, or cotton swab.

Cleaning the Particle Sensor (every 12 months)

Clean the air inlet and outlet using a vacuum cleaner or soft brush.

1. Open the particle sensor cover on the right side of the unit.
2. Use a damp cotton swab to clean and dry the lens, dust inlet, and dust outlet.

Cleaning the Pre-filter (every 3 months)

The Pre-Filter should be cleaned based on air quality.

Vacuum method:

1. Remove the front panel.
2. Vacuum the Pre-Filter on low power with a nozzle or brush attachment to remove visible particles.

If vacuuming is insufficient, wash the Pre-Filter:

Washing method:

1. Remove the Pre-Filter.
2. Wash gently in lukewarm water for 2-3 minutes until clean.
3. Rinse with clean tap water.
4. Towel dry to remove excess water.
5. Allow to air dry for 12-24 hours.
6. Replace the dry Pre-Filter in the unit.

Cleaning the Exterior of the Unit

Wipe exterior surfaces with a dry cloth. If necessary, use a damp cloth for stubborn stains, avoiding commercial cleaners.

Filter Cleaning and Replacement Schedule

Clean particle sensor every 12 months when replacing filters. Clean front panel and other components as needed.

*Based on 24/7 operation

Replacing your Filters

Always unplug the unit before cleaning or replacing filters. Filter life varies based on household pollution levels.

Replacing the Pre-Filter

The Pre-Filter is designed to be cleaned and reused and does not need replacement.

1. Pull the tabs on the front of the Pre-Filter to remove it.
2. Set aside the Pre-Filter while replacing other filters.

Replacing the Medium Filter (every 12 months)

Do NOT discard the filter frame. Discard the old Medium Filter.

1. Remove the old Medium Filter from the black frame and discard it.
2. Open the new Medium Filter, discard the plastic wrapping, and secure it in the black frame.

Note: The Medium Filter frame and the Customized Filter frame look similar, but the Medium Filter frame is slightly larger.

Replacing the BioGS HEPA Filter (every 12 months)

Discard the old HEPA Filter; do not reuse.

1. Remove and discard the old HEPA Filter.
2. Remove the new filter from its plastic wrapping.
3. Place the new HEPA Filter in the filter case.

Replacing the Customized Filter (every 12 months)

Do NOT discard the filter frame. Discard the old Customized Filter; do not reuse.

1. Remove the old Customized Filter from the black frame and discard it.
2. Take the new Customized Filter out of its plastic wrapping and place it in the black frame. Ensure the front of the filter faces up. Refer to the "Know your Customized Filter" chart (pages 7-8) to identify the front.

Replacing the Activated Carbon Filter (every 12 months)

Discard the old Activated Carbon Filter; do not reuse.

1. Pull out and discard the old Activated Carbon Filter.
2. Remove the new Activated Carbon Filter from its plastic wrapping and place it in the filter case.

Return filters to the filter case in order from back to front: Activated Carbon Filter, Customized Filter, BioGS HEPA Filter, Medium Filter, Pre-Filter. (See diagram on page 7-8).

Wall-Mounting your MinusA2 (Optional)

Use only the approved Rabbit Air wall-mount kit. The MinusA2 Air Purifier can be used free-standing or wall-mounted.

Wall-mount installation guidelines:

• Ensure at least 60 cm (2 feet) clearance from the ceiling and 20 cm (8 inches) clearance on either side.
• Be careful not to drop the front panel or filter case during filter replacement.
• Do not pull on the power cord.
• Ensure hanger screws are securely driven into studs.

▶️ Scan code to watch an Instructional video.

For a wall-mount kit, call 1-888-866-8862 or order online at www.rabbitair.com.

Disclaimer for installing wall-mounted objects

Do not attempt installation if instructions are not understood. Contact a qualified contractor for mounting bracket installation. You risk damaging the purifier, other property, or personal injury from improper installation. Check for missing or defective parts. Rabbit Air is not liable for damage or injury from incorrect mounting, assembly, or usage.

• After installing the bracket, ensure it is firmly in place before mounting the purifier.
• Avoid drilling or screwing into existing wiring in the wall.

Proper installation is crucial and is not Rabbit Air's responsibility. Consult a qualified professional for installation. Maximum weight of air purifier SPA-780N: 8.8 kg / 19.4 lbs.

Warranty

Inscrivez en ligne à www.rabbitair.com/warranty

Register Your Air Purifier Online Now For:

• ✅ Product Protection: Registering your product confirms the purchase date for warranty security, especially if proof of purchase is lost.
• ? Proof of Ownership: Your model number, serial number, and other information are stored. Complete and return registration within 90 days for a 5-year limited warranty.

? Service to the customer 24/7: If you have questions, call 1-888-866-8862 or visit www.rabbitair.com.

Limited Warranty

Rabbit Air Five (5) Year Limited Warranty (For Rabbit Air Branded Products Only)

IMPORTANT: By using the BioGS 2.0 or MinusA2 air purifiers, you agree to be bound by the terms of this 5-Year Limited Warranty. Rabbit Air reserves the right not to honor this warranty if it has not been registered within ninety (90) days of purchase. This warranty applies regardless of purchase source (authorized reseller or direct).

DO NOT USE YOUR RABBIT AIR PRODUCT UNTIL YOU HAVE READ THE TERMS OF THE WARRANTY. If you do not agree, return the product within the stated return period for a refund.

This limited warranty does not cover replacement filters, filter frames, filter cases, or wall mount brackets.

How Consumer Law Relates to This Warranty

This warranty grants specific legal rights, and you may have other rights that vary by location. Rabbit Air does not exclude, limit, or suspend other rights you may have, including those arising from non-conformity of a sales contract.

Warranty Limitations Subject to Consumer Law

To the extent permitted by law, this warranty and its remedies are exclusive. Rabbit Air disclaims all statutory and implied warranties, including merchantability and fitness for a particular purpose. Where disclaimers are not permitted, Rabbit Air limits the duration and remedies of such warranties to the duration of this express warranty.

What is Covered by This Warranty?

Rabbit Air warrants its products against defects in materials and workmanship for FIVE (5) YEARS from the original retail purchase date, when used normally according to published guidelines.

What is NOT Covered by This Warranty?

This warranty does not apply to non-Rabbit Air branded hardware, consumables, cosmetic damage, damage from misuse, unauthorized service, modifications, normal wear and tear, sample/as-is products, defaced serial numbers, or stolen products. Rabbit Air does not warrant uninterrupted or error-free operation.

Your Responsibilities

Register your product within ninety (90) days of purchase at www.rabbitair.com/warranty to ensure warranty coverage. Provide proof of purchase and answer diagnostic questions when seeking service.

Warranty Service During the First 90 Days

Contact Rabbit Air at 1-888-866-8862 or CustomerService@rabbitair.com for warranty claims. Free shipping is provided for claims within the contiguous United States.

Warranty Service After the First 90 Days

Rabbit Air will repair or replace defective products. Replacement items become your property. Contact Rabbit Air for service procedures. Shipping costs may apply for service outside the contiguous US.

Unauthorized repairs void the warranty.

Rabbit Air reserves the right to change service methods. Service is limited to available options in the country of service. Compliance with import/export laws is the user's responsibility.

Limitation of Liability

Rabbit Air is not responsible for indirect, special, incidental, or consequential damages resulting from product use or warranty breach. This limitation does not apply to death or personal injury claims or liability for intentional/grossly negligent acts.

General

No reseller, agent, or employee is authorized to modify this warranty. This warranty is governed by California law. Rabbit Air may change its warranty policies for future purchases.

For more information, contact Rabbit Air at 1-888-866-8862.

Welcome Message

Bonjour! ? Faites la connaissance de votre MinusA2™ tout neuf! Nous espérons que cet ensemble élégant de propreté est exactement ce dont vous avez toujours rêvé. Assurez-vous de vous familiariser avec cette nouvelle addition à votre maison, en explorant toutes ses fonctions dans la brochure ci-jointe et sur notre site Web. Si vous avez des questions, n'hésitez pas à nous appeler à tout moment. Nous aimerions avoir de vos nouvelles!

This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Une sécurité enfant qui a la particularité de s'arrêter quand on enlevé le panneau avant.

Informations Générales de Sécurité Concernant Votre Purificateur D'air MinusA2

Attention: lorsque vous utilisez des appareils électriques, observez les précautions de base suivantes afin de réduire les risques d'incendie, de choc électrique et de blessures:

• Please read all tips and warnings before using your Rabbit Air™ purifier.
• Use only as directed by the owner's manual.
• Observe extreme caution when using the air purifier near children.
• Rabbit Air purifiers are for indoor use only.
• The purifier is not intended for use in bathrooms, laundry areas, or other damp indoor environments. Keep it away from water.
• Do not use near fireplaces or areas with flammable products or vapors.
• The appliance has a polarized plug. To reduce electric shock risk, insert it into a polarized outlet only one way. If it doesn't fit, reverse the plug. If it still doesn't fit, contact a qualified electrician. Do not attempt to bypass this safety feature.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, unless supervised by a responsible person.
• Children should be supervised to ensure they do not play with the appliance.
• This product complies with the maximum allowable ozone concentration of 0.050 ppmv in a 24-hour period. Health Canada Guideline 2010 recommends a maximum exposure limit of 0.020 ppmv (8-hour average) in a sealed, controlled room (approx. 30 m³).

Instructions de Sécurité Électrique

• The Rabbit Air purifier is designed for use in a 110/120V outlet only.
• Turn off the purifier before unplugging.
• Unplug when not in use or before servicing/cleaning.
• For shock risk reduction, it has a polarized plug. Insert only one way. If it doesn't fit, reverse it. If it still doesn't fit, contact a qualified electrician. Do not alter the plug.
• Avoid touching the purifier or plug with wet hands.
• Keep the electrical cord away from heated surfaces.
• If the cord or plug is damaged, return the unit to an authorized service facility.
• Unauthorized repair attempts void the warranty and may cause injury or damage.
• Do not pull, carry, lift, or drag the purifier by its power cord. Remove the plug by grasping it gently.
• Keep fingers, body parts, hair, jewelry, and loose clothing away from openings when plugged in.

Les Directives D'utilisation

• Do not block the air intake or outlet.
• Do not use on or around hot surfaces.
• Do not use in rooms where it may contact steam.
• Do not operate on its side.
• Do not install in greasy or damp environments.
• Do not use detergent or soap for cleaning.
• Do not operate without filters.
• Do not wash and reuse filters, except for the washable Pre-Filter.
• When transporting, always hold by the handle on the back.

Directives D'installation

• Avoid placing the purifier where the air intake or outlet can become clogged with dirt.
• Ensure at least two feet of clearance from the air outlet and eight inches from the air intake on either side.

Faites la Renconte de Votre MinusA2

Vue de Face

The front view shows the air purifier with labeled components:

• Éclairage d'ambiance (Mood Light) ?
• Entrée d'air (Air Intake) (around all sides of the front panel)
• Panneau de contrôle/ Tableau d'affichage (Control Panel/Display Panel)
• Détecteur de particules (Particle Sensor) ?
• Détecteur de lumière (Light Sensor) ☀️
• Indicateur de qualité de l'air (Air Quality Indicator) ?
• Détecteur d'odeurs (Odor Sensor) ?

Vue Arrière

The back view shows the air purifier with labeled components:

• Poignée (Handle)
• Cordon d'alimentation (Power Cord)
• Système d'accrochage (Bracket Holder)
• Sortie d'air (Air Outlet)

Se connecter avec un Smartphone ou tablette

Requires an iOS or Android device with Bluetooth or a 2.4 GHz WiFi network.

1. Download the Rabbit Air app to your smartphone or tablet.
2. Use your existing customer login or create a new account.
3. Select "Configurer un nouveau purificateur" or "Rechercher un purificateur existant" and follow the on-screen steps.
4. You can now monitor your air quality and control your air purifier.

For more information, visit www.rabbitair.com/wireless-faq.

Panneau de Contrôle

Alimentation

Press the power button for two seconds to turn the unit on or off.

Vitesse

There are five speeds. The fan speed changes in the following order when pressing the speed adjustment button: Silent > Low > Medium > High > Turbo.

Réinitialisation des filtres et du mode de fonctionnement

This is a dual-function button. A short press allows you to change the operating mode between Auto Mode and Pollen Mode. A long press resets the filter replacement indicator.

Éclairage d'ambiance et générateur d'ions négatifs

This dual-function button allows, with a short press, to turn the ambient light on or off. A long press turns the negative ion generator on or off.

Voyants Lumineux (Indicator Lights)

• Indicateur de vitesse du ventilateur (Fan Speed Indicator): Shows fan speed (Silent to Turbo).
• Indicateur mode pollen (Pollen Mode Indicator): When Pollen Mode is selected, fan speed adjusts automatically based on air quality. The Mood Light ? cycles through blue, violet, mauve, and rose.
• Indicateur mode automatique (Auto Mode Indicator): When Auto Mode is selected, fan speed adjusts automatically based on air quality. The Mood Light ? remains blue.
• Indicateur de remplacement des filtres (Filter Replacement Indicator): ? Illuminates when filters need replacement. Press and hold the Mode/Filter Reset button for three seconds after replacement until the indicator turns off.
• Indicateur d'ions négatifs (Negative Ion Indicator): ⚡ Signals the operation of the negative ion generator.
• Indicateur de Wireless (Wireless Indicator): ? Indicates Wi-Fi connection status.
• Indicateur de qualité de l'air (Air Quality Indicator): ? Shows room air quality. Color shifts from blue (good) to violet, mauve, or red (poor) based on pollutant levels.

Faites Connaissance Avec Vos Filtres

The air purifier uses a multi-stage filtration system:

• Filtre HEPA BioGS (BioGS HEPA Filter)
• Filtre intermédiaire (Intermediate Filter)
• Filtre personnalisé (Customized Filter)
• Filtre carbone au charbon actif (Activated Carbon Filter)
• Pré-filtre (Pre-Filter)

A diagram shows the filter layers and their order.

Démarrage – Installation Initiale

The MinusA2 is for residential use only. Filters are sealed in plastic to preserve quality and must be removed before operation.

Your customized filter will be in plastic packaging outside the unit. Set it aside for later installation (step 6).

1. Remove the front panel by detaching it from the bottom and pulling upwards.
2. Pull out the filter case by gripping the handles on each side and pulling forward. Place the case on a flat surface.
3. Pull the tabs on the front of the pre-filter to remove it from the case.
4. Remove the intermediate filter (white) from the black chassis, removing its plastic packaging. Reinstall it.
5. Remove the HEPA filter and its plastic packaging.
6. Remove the empty customized filter frame. Insert the customized filter into its frame, ensuring the front faces up. Refer to the "Know Your Customized Filter" table (page 11) to identify the front.
7. Remove the activated carbon filter and its plastic packaging.
8. Replace the filters in the filter case in the following order (back to front): Activated Carbon Filter, Customized Filter, BioGS HEPA Filter, Intermediate Filter, Pre-Filter. (See diagram on page 9).
9. Slide the filter case back into the unit, first inserting the bottom, then pushing the top inwards.
10. Replace the front panel by attaching it to the upper hooks first, then securing the bottom of the panel to the unit body.

Sachez Reconnaître Votre Filtre Personnalisé!

Identify your customized filter by its front and back colors:

• Filtre personnalisé anti-toxines: Color avant: Violet, Color arrière: Gris
• Filtre personnalisé contre les allergies aux animaux (anti-poils): Color avant: Violet & Rose, Color arrière: Rose
• Filtre personnalisé anti-microbien: Color avant: Violet & Jaune, Color arrière: Jaune
• Filtre personnalisé anti-odeurs: Color avant: Noir (matériau textile épais), Color arrière: Noir

Les Différents Modes de Fonctionnement

Mode Automatique

Press the power button to start the purifier in Auto Mode. The Mood Light ? remains blue. The Air Quality Indicator ? color changes based on air quality and adjusts fan speed accordingly. Sleep Mode activates if the room is dark for 3 minutes.

Mode Pollen

Press the power button to start the unit. Quickly press the Mode/Filter Reset button to select Pollen Mode. In Pollen Mode, the Mood Light ? fluctuates between blue, violet, mauve, and rose. The Air Quality Indicator ? color changes based on air quality and adjusts fan speed. Sleep Mode activates if the room is dark for 3 minutes. During Sleep Mode, the Mood Light ? and Air Quality Indicator ? turn off, but fan speed continues to adjust based on air quality.

Sélection Manuelle de La Vitesse

Press the power button to start the purifier in Auto Mode. Press the speed button to manually adjust fan speed. Choose from five speeds: Silent, Low, Medium, High, and Turbo. The Mood Light ? remains blue. Sleep Mode activates if the room is dark for 3 minutes.

Sélection du Mode de Fonctionnement

(Mode pollen ou mode automatique)

After turning on the unit, briefly press the Mode/Filter Reset button to select your desired mode (Pollen or Auto). When you turn the unit off and on again, it will restart in the previously selected mode.

Réinitialisation des Filtres

The Filter Replacement Indicator ? illuminates when it's time to replace filters. After replacement, press and hold the Mode/Filter Reset button for three seconds, or until the indicator turns off.

Mode Veille

Avec Capteur de Lumière

Light sensors measure room light intensity. When the room is dark, the MinusA2 automatically enters Sleep Mode after three minutes. In Sleep Mode, the Mood Light ? and Air Quality Indicator ? turn off, and the Sleep Mode indicator turns on. If the unit is in Auto Mode, the fan speed automatically switches to Silent Speed, reducing energy consumption and noise. Sleep Mode does not override fan speed if the MinusA2 is operating in Manual Speed or Pollen Mode.

Modification du Niveau de Sensibilité des Détecteurs

You can adjust the sensitivity level of the air quality sensors. They are preset to a standard sensitivity level by default.

1. Press and hold both the Speed and Mode buttons simultaneously for three seconds.
2. The Air Quality Indicator ? and Auto Mode Indicator will blink.
3. Press the Speed button to choose your sensitivity level:
• Replace Filters: Low sensitivity
• Pollen Mode: Standard sensitivity
• Auto Mode: High sensitivity
4. Press and hold the Speed and Mode buttons for three seconds to save the chosen sensitivity level. If no action is taken for ten seconds, the last selected level is saved automatically.

Fonctionnement De L'éclairage D'ambiance

The ambient light changes color to indicate the unit's operating mode.

Mise En Route/Arrêt

The ambient light turns on automatically when the purifier is started. Briefly press the "Mood Light" button.

The light color corresponds to the current operating mode:

• Mode Automatique: Blue
• Mode Pollen: Light cycles between blue - violet - mauve - rose.

Générateur D'ions Négatifs

Press the "Mood Light & Ion on/off" button for three seconds to turn the negative ion generator ⚡ on or off. The corresponding indicator light illuminates when the generator is active.

Réinitialisation de Wireless

Compatible with 2.4 GHz Wi-Fi networks.

• Speed - Press and hold: Start or reset wireless settings to connect the purifier to your home network using a mobile device. Download the Rabbit Air app from the Apple Store (iOS) or Google Play Store (Android) and follow installation instructions.

The wireless indicator ? blinks during configuration and remains lit once connected to the network.

Nettoyage et Entretien

Always unplug the unit before any cleaning or maintenance operation.

Nettoyage du Détecteur de Particules

The particle sensor should be cleaned every three to six months. Clean the air inlet and outlet with a vacuum cleaner or soft brush.

1. Open the particle sensor cover on the right side of the unit (when facing it).
2. Use a damp cotton swab to clean and dry the lens, dust inlet, and dust outlet.

Nettoyage de L'Entrée et de la Sortie D'air

Clean the air inlet and outlet with a soft brush. ATTENTION: Be careful not to drop the brush into the unit.

Nettoyage du Panneau Frontal

1. Remove the unit's panel and dust it with a dry cloth or soft brush.
2. If necessary, use a damp cloth to remove stubborn stains or accumulated dirt. Avoid commercial cleaning products.

Nettoyage des Ampoules de L'éclairage D'ambiance

1. Remove the unit's front panel and use a dry cloth, soft brush, or cotton swab to dust the lamps on the back of the panel.
2. If necessary, use a damp cloth to remove stubborn stains or accumulated dirt. Avoid commercial cleaning products.

Nettoyage de L'extérieur de L'appareil

The exterior of the unit should be cleaned based on the room's air quality.

1. Use a clean, dry cloth to wipe the exterior surfaces.
2. If necessary, use a damp cloth to remove stubborn stains or accumulated dirt. Avoid commercial cleaning products that may damage the surface.

Nettoyage du Pré-filtre

The pre-filter should be cleaned based on the level of air pollution.

Méthode sous vide (Vacuum method):

1. Remove the front panel.
2. Vacuum the pre-filter with a hand vacuum using a nozzle or soft brush attachment on low power to remove visible particles.

If vacuuming is not sufficient, follow these steps to wash it:

Lavage à la main (Washing method):

1. Remove the pre-filter from the unit.
2. Fill a sink with lukewarm water and gently wash the pre-filter for 2-3 minutes or until completely clean.
3. Rinse the pre-filter with clean tap water.
4. Towel dry to remove excess water.
5. Let the pre-filter air dry for 12 to 24 hours.
6. Once completely dry, place it back into the unit.

Nettoyage du Filtre et Calendrier de Remplacement*

Clean particle sensor every 12 months when replacing filters. Clean front panel and other components as needed.

*Based on 24/7 operation

Remplacement des Filtres

Always unplug the unit before cleaning/replacing filters. Filter lifespan varies based on indoor pollution levels.

Remplacement du Pré-filtre

Do not discard the pre-filter. It is designed to be cleaned and reused and does not need replacement.

1. Pull the tabs on the front of the pre-filter to remove it from the filter case.
2. Set the pre-filter aside while replacing other filters.

Remplacement du Filtre Intermédiaire tous les 12 mois

Do NOT discard the filter frame. The intermediate filter must be discarded and cannot be reused.

1. Remove the used filter from the black chassis and discard it.
2. Take the new filter out of its packaging.
3. Place the new intermediate filter into the black chassis.

Note: The medium filter frame and the customized filter frame look similar, but the medium filter frame is slightly larger.

Remplacement du Filtre HEPA BioGS tous les 12 mois

Discard used HEPA Filters; do not reuse.

1. Remove and discard the used HEPA Filter.
2. Remove the new filter from its packaging.
3. Place the new HEPA Filter into the filter case.

Remplacement du Filtre Personnalisé tous les 12 mois

NE PAS jeter le cadre du filtre. Les Filtres Personnalisés usagés doivent être jetés, ils ne peuvent pas être réutilisés.

1. Remove the used customized filter from the black chassis and discard it.
2. Take the new filter out of its packaging and place it in the black chassis. Ensure the filter is placed correctly, front side facing forward. Refer to the "Know Your Customized Filter" table on page 11 to verify the front color.

Remplacement du Filtre à Charbon Actif tous les 12 mois

Discard used activated carbon filters; do not reuse.

1. Remove and discard the used filter.
2. Remove the new activated carbon filter from its packaging and place it in the filter case.

Reassemble filters in the filter case in the following order (from back to front): Activated Carbon Filter, Customized Filter, BioGS HEPA Filter, Intermediate Filter, Pre-Filter. (See diagram on page 9).

Installation Murale de Votre MinusA2 (Optionnelle)

Use only the approved Rabbit Air wall-mount kit for wall mounting your MinusA2 air purifier. The MinusA2 air purifier is designed for free-standing or wall-mounting.

Consignes d'installation au mur:

• The MinusA2 air purifier must be placed at a minimum distance of 60 cm (2 feet) from the ceiling, with at least 20 cm (8 inches) of space on each side.
• Be careful not to drop the front panel or filter case when replacing filters.
• Do not pull on the power cord.
• Ensure mounting screws are securely anchored into wall studs (using appropriate anchors and/or wall studs).

▶️ Scan the code to watch a pedagogical video.

To purchase a wall-mount kit, call 1-888-866-8862 or order online at www.rabbitair.com.

Disclaimer for Installing Wall-Mounted Products

Do not attempt to install this product if you do not understand the instructions. Contact a qualified professional for mounting bracket installation and call 1-888-866-8862 with any questions. Improper installation risks damaging the air purifier, other property, or causing personal injury. Check for missing or defective parts. Contact Rabbit Air for immediate replacement parts shipment. Rabbit Air is not liable for damage or injury resulting from incorrect installation, assembly, or usage.

• After installing the wall-mount bracket, ensure it is firmly in place before mounting the MinusA2 air purifier.
• During wall installation, be careful not to drill or screw into existing wiring in the wall.

Correct wall installation is crucial and is outside Rabbit Air's responsibility. Please consult a qualified professional or specialized supplier for mounting bracket installation. Maximum weight of air purifier SPA-780N: 8.8 kg / 19.4 lbs.

Garantie

Inscrivez en ligne à www.rabbitair.com/warranty

Inscrivez Votre Purificateur d'Air en Ligne dès Maintenant Pour:

• ✅ Protection des produits: By registering your product and purchase information, we can confirm the purchase date to secure your warranty. This confirmation provides security in case your original proof of purchase is lost, or if your unit needs servicing in the future.
• ? Preuve de propriété: Your model number, serial number, and other information will be kept on file. Please complete and return this registration within 90 days of purchase to receive our 5-year limited warranty.

? Service à la clientèle 24/7: If you have questions, call 1-888-866-8862. Visit us at www.rabbitair.com.

Garantie Limitée

Rabbit Air Five (5) Year Limited Warranty (For Rabbit Air Branded Products Only)

IMPORTANT: By using the BioGS 2.0 or MinusA2 air purifiers, you agree to be bound by the terms of the Rabbit Air Five (5) Year Limited Warranty. Rabbit Air reserves the right not to honor this warranty if it has not been registered within ninety (90) days of your purchase. This warranty applies regardless of whether you purchase from an authorized reseller or directly from Rabbit Air.

DO NOT USE YOUR RABBIT AIR PRODUCT UNTIL YOU HAVE READ THE TERMS OF THE WARRANTY. If you do not agree, do not use the product and return it within Rabbit Air's return period for a refund.

This limited warranty does not cover replacement filters, filter frames, filter cases, or wall mount brackets.

COMMENT LE DROIT DU CONSOMMATEUR SE RAPPORTE À CETTE GARANTIE

This warranty gives you specific legal rights, and you may have other rights that vary from state to state (or by country or province). Rabbit Air does not exclude, limit, or suspend other rights you may have, including those arising from the non-conformity of a sales contract.

LIMITATIONS DE LA GARANTIE SOUMISES AU DROIT DE LA CONSOMMATION

To the extent permitted by law, this warranty and the remedies set forth are exclusive and in lieu of all other warranties, remedies, and conditions. Rabbit Air disclaims all statutory and implied warranties, including warranties of merchantability and fitness for a particular purpose, and warranties against hidden or latent defects. Where such warranties cannot be disclaimed, Rabbit Air limits their duration and remedies to this express warranty.

QUELLE EST LA COUVERTURE DE CETTE GARANTIE?

Rabbit Air warrants its products against defects in materials and workmanship for FIVE (5) YEARS from the original retail purchase date, when used normally in accordance with Rabbit Air's published guidelines.

QU'EST-CE QUI N'EST PAS COUVERT PAR CETTE GARANTIE?

This warranty does not apply to non-Rabbit Air branded hardware, consumables, cosmetic damage, damage from misuse, unauthorized service, modifications, normal wear and tear, sample/as-is products, defaced serial numbers, or stolen products. Rabbit Air does not warrant uninterrupted or error-free operation.

VOS RESPONSABILITÉS

Register your product within ninety (90) days of purchase at www.rabbitair.com/warranty to ensure warranty coverage. Provide proof of purchase and answer diagnostic questions when seeking service.

SERVICE DE GARANTIE PENDANT LES QUATRE-VINGT-DIX PREMIERS JOURS

Contact Rabbit Air at 1-888-866-8862 or CustomerService@rabbitair.com for warranty claims. Free shipping is provided for claims within the contiguous United States.