HAVSFJÄDER Pendant Lamp Shade Assembly Instructions
Product by IKEA
Product Overview
This document provides assembly instructions for the IKEA HAVSFJÄDER pendant lamp shade. It details the parts required and the steps to construct the spherical light fixture.
Parts List
Before starting, ensure you have all the following components:
- 2x Circular base plates
- 1x Central fitting
- 24x Curved panels
- 3x Allen keys (tools)
The initial diagram shows two figures contemplating assembly, followed by a figure with an IKEA bag, indicating preparation for assembly.
Assembly Steps
Step 1: Prepare the Base
Insert the 3 Allen keys into the designated slots on the central circular plate.
A close-up view shows an Allen key being inserted into a slot on the circular plate, with an arrow indicating the direction of insertion.
Step 2: Attach Central Fitting
Attach the central fitting to the circular base plate using the inserted Allen keys.
The central fitting is shown being connected to the base plate, with the Allen keys securing it. A close-up shows the Allen key engaging with a component of the central fitting.
Step 3: Attach First Set of Panels
Attach 22 of the curved panels to the assembled base and central fitting structure.
The main illustration shows the structure with some panels attached. Close-up views demonstrate how the curved panels clip or slot into place on the structure.
Step 4: Install Light Source
Insert a light bulb into the central fitting. Ensure the bulb is compatible with the fixture's requirements (not specified in diagrams).
The diagram shows the lamp shade structure with the central fitting exposed. An arrow indicates the direction to screw in a light bulb.
Step 5: Final Panel Attachment
Attach the remaining curved panels to complete the spherical shape of the lamp shade.
The illustration shows the final attachment of the remaining panels. Close-up views illustrate how the panels are secured, likely by clipping them onto the structure.
