BRUNSTA Pendant Lamp Shade Assembly Instructions
This guide provides step-by-step instructions for assembling the IKEA BRUNSTA pendant lamp shade. The process begins with selecting the product and ends with a fully assembled lamp shade ready for installation.
Parts Included
Before starting, ensure you have all the following parts:
- 1x Main wireframe structure
- 1x Top hexagonal wireframe ring
- 1x Middle hexagonal wireframe ring
- 1x Bottom hexagonal wireframe ring
- 1x Circular fitting
- 6x Diamond-shaped wireframe pieces
Step 1: Attach Diamond Pieces
Take the 6 diamond-shaped wireframe pieces. Attach each piece to the main wireframe structure by hooking their ends into the designated slots on the main frame.
Step 2: Attach Bottom Ring
Attach the bottom hexagonal wireframe ring. Hook the ends of the ring into the lower part of the main structure. A 'click' sound indicates it is secured.
Step 3: Attach Middle Ring
Attach the middle hexagonal wireframe ring. Place it over the structure and hook its ends into the main frame.
Step 4: Attach Top Ring
Attach the top hexagonal wireframe ring. Place it over the structure and hook its ends into the main frame.
Step 5: Prepare Lamp Cord
Prepare the lamp cord. Insert the circular fitting onto the lamp cord and twist it clockwise [arrow-clockwise] to secure.
Step 6: Mount Lamp Shade
Mount the assembled lamp shade. Place the shade onto the lamp holder and secure it by pushing upwards [arrow-up].
