TaoTronics TT-BA07 Wireless 2-in-1 Adapter User Guide

Contact Information

Asia Pacific
E-mail: support.jp@taotronics.com (JP)
JP Importer: 株式会社SUNVALLEY JAPAN
Address: 〒104-0032 東京都中央区八丁堀3丁目18-6PMO京橋東9F

Europe
E-mail: support.uk@taotronics.com (UK), support.de@taotronics.com (DE), support.fr@taotronics.com (FR), support.es@taotronics.com (ES), support.it@taotronics.com (IT)
EU Importer: ZBT International Trading GmbH
Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland

North America
E-mail: support@taotronics.com (US), support.ca@taotronics.com (CA)
Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address: 46724 Lakeview Blvd, Fremont, CA 94538

Manufacturer
Manufacturer: Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129

Learn more about the EU Declaration of Conformity: https://www.taotronics.com/downloads-TT-BA07-CE-Cert.html

Product Diagram

The adapter has a circular power button with an LED indicator. It also features TX/RX mode indicators and ports for audio and charging.

Control Functions

Note: The mode can only be successfully switched after the adapter is turned off for 3 seconds. After the switch, the pairing history of the previous devices will be cleared.

LED Indicators

Note: For first-time use, the adapter automatically enters pairing mode upon powering on. Follow the instructions below to pair.

How to Use

Charging

1. Connect the micro-USB end of the charging cable to the charging port of the Bluetooth® adapter.
2. Plug the USB end of the charging cable to a USB charging port or any active USB port.
3. The LED indicator will turn red when charging. It will automatically turn off when the device is fully charged.

Note: You can use the adapter while it is charging. We recommend charging the unit for at least 2 hours before using it for the first time.

Pairing

Pair in TX mode:

1. Set the TT-BA07 to TX mode and connect it to your audio transmitting device.
2. Place your Bluetooth® audio receiving device within a 3 feet / 1 meter range and set it to pairing mode.
3. Press and hold the Power Button for 5 seconds (LED indicator flashes blue slowly) and tap twice to enter pairing mode (LED indicator flashes red and blue alternately). After approximately 30 seconds, the pairing will be done (LED indicator in solid blue).

Note: To achieve low latency, ensure your receiving Bluetooth device supports the Qualcomm® aptX™™ Low Latency codec; otherwise, you may experience noticeable lag between sound and picture. Do not connect the TT-BA07 to an amplifier output in TX mode, as this may cause over-voltage and damage the adapter.

Pair in RX mode:

Press and hold the Power Button of the adapter for 5 seconds (LED indicator flashes blue slowly). Pairing will start 5 seconds after being powered on (LED indicator flashes red and blue alternatively).

1. Activate the Bluetooth® function on your phone and search for nearby Bluetooth® devices:
• For iOS: Settings > Bluetooth® > On
• For Android: Settings > Wireless & Networks > Bluetooth®: On > Scan for devices
2. Find "TaoTronics TT-BA07" in the search results and tap on it to connect. Once connected, the LED indicator will turn solid blue.

Note: The adapter enters pairing mode automatically when powered on for the first time. The original pairing memory will be cleared after a mode switch. It will automatically start pairing each time it's powered on. If a PIN code is required for pairing, try 0000 (four zeroes), 8888 (four eights), 1111 (four ones), or 1234. The adapter can remember previously paired devices and will attempt to pair with devices automatically, without going into pairing mode.

Pair with two devices at the same time

In TX mode:

In TX mode, the adapter can pair with two Bluetooth® stereo earphones/speakers simultaneously.
1. Follow the previous instructions in the “Pairing" section to pair the TT-BA07 with your first device.
2. Turn off the Bluetooth® function on your first device, then press the Power Button twice to pair and connect to your second device.
3. Turn on the Bluetooth® function on your first device. Within approximately 30 seconds, the first device will automatically connect.

Note: When pairing with two devices, both can play music simultaneously. The adapter will automatically re-pair when powered on.

In RX mode:

In RX mode, the adapter can pair with two Bluetooth® devices simultaneously.
1. Follow the previous instructions in the "Pairing" section to pair the TT-BA07 with your first device. Disable the Bluetooth® function on your first device. Press the Power Button twice to pair with the second device.
2. Turn on the Bluetooth® of the first device; the TT-BA07 adapter is now successfully paired with both devices.

Note: Only one device can play music at a time. You must stop the music on one device to play it on the other. The adapter will automatically re-pair when powered on.

Care and Maintenance

• Keep the adapter away from heat and humidity.
• Do not expose the adapter to direct sunlight or extreme heat.
• Do not attempt to disassemble the adapter, as it may cause serious damage.
• Do not drop or knock the adapter on hard surfaces, as it may damage the internal circuit.
• Do not use chemicals or detergents to clean the product.
• Do not scratch the surface with sharp objects.

FCC Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

WEEE Compliance

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

EU Declaration of Conformity

We (Manufacturer is responsible for this declaration)
Shenzhen NearbyExpress Technology Development Company Limited
(Company name)
333 Bulong Road, Jialianda Industrial Park, Building 1, Bantian, Longgang District, Shenzhen, China
(Company address)
declare under our sole responsibility that the product
Trade name: TAOTRONICS
Equipment: WIRELESS 2-IN-1 ADAPTER
Model No.: TT-BA07
to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive 2014/53/EU, product is responsible to affix CE marking, the following standards were applied:
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.2.0
EN 301 489-17 V3.2.0
EN 300 328 V2.1.1

Full Name: kent.peng
Position: Approbation Manager
Signature: Kent peng
Site: Shenzhen
Date: 2018/4/16