Quick start guide
This guide covers the following sections:
- 1. Packing list
- 2. Product description
- 3. Installation
- 4. Product configuration
- 5. Legal notice
1. Packing list
- Camera X1
- Power adaptor X1
- Type-C cable X1
- Quick guide X1
- Warning sticker 1X
2. Product description
The camera features the following components:
- 1. Microphone
- 2. Lens
- 3. LED indicator
- 4. SD card slot
- 5. Reset button
- 6. Type-C port
- 7. Speaker
Notice: To reset the device, press and hold the reset button for 5 seconds. The camera will beep when the operation is complete.
LED Indicator Status:
| LED Status | Description |
|---|---|
| Flashing red light (slow) | Wait for network configuration |
| Flashing red light (fast) | Connecting to the network |
| Fixed red light | Network is malfunctional |
| Fixed blue light | Camera is working correctly |
3. Installation
- Put the camera on a flat surface.
Diagram illustrating the camera placement on a flat surface.
4. Product configuration
- Turn on your camera.
- Connect your smartphone to the Wi-Fi network.
- Download the Arenti app from the App Store or Google Play, depending on your device.
- Launch the App and sign up for the first use.
- Follow the on-screen instructions within the app to add your camera.
For more information, please refer to the Arenti app.
Specifications
Camera Specifications
| Sensor type | 1/3" CMOS |
| Min. brightness | Color 0.1Lux@F2.0 Black and white 0.01Lux@F2.0 |
| Resolution | 2 Mega pixels |
| Lens | 3.6 mm F2.0 |
| Shutter | 1/15-1/10,000 per second |
| Infrared | High power LED with ICR |
| Infrared distance | 10 meters |
| Pan/Tilt | 0°~355°/-43°~77° |
| Video compression | H.264 |
| Bit rate | 32Kbps - 2Mbps |
| Max resolution | 1920 x 1080 |
| Framerate | 1-25 per second |
| Picture settings | Support HD/SD; support flip |
| Storage | SD card (Max 256GB) |
| Audio | Two-way audio |
| Protocols | HTTP, DHCP, DNS, RTSP |
| WiFi standard | IEEE802.11b/g/n/ac |
| Frequency | 2.4 GHz; 5 GHz |
| Bandwidth | 20/40MHz |
| WiFi encryption | WPA-PSK/WPA2-PSK |
| Security | AES128 |
| Working temperature | -20℃~50℃ |
| Size(mm) | 59 x 63 x 110 |
Power Adapter Specifications
| Model | TPA-67F050100VU01 |
| Input voltage | 100-240V AC |
| Input frequency | 50-60Hz |
| Output voltage | 5V DC |
| Output current | 1A |
| Output power | 5W |
| Efficiency | 73.62% |
| No-load Consumption | <0.1W |
5. Legal notice
Support: www.laxihub.com
Symbols
Direct current (DC)
Battery Disposal: Do not throw batteries or out-of-order products with household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.
CE Marking: Hereby, Laxihub, declares that the radio equipment type 'PTCam' is in compliance with the Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following Internet address: www.laxihub.com
AInanny Baby Monitor – Arenti AMZ
