- Wide detection range: the walk across detection up to 12m.
- Tailored detection zone: The detection area can be adapted using the detection shields.
- Detection moving speed: 0.6-1.5 m/s.
- Easy to adjust Lux & time delay settings.
Product Visuals
The product features a white, circular PIR sensor unit designed for surface mounting. It has a central lens array for motion detection.
Product Details
5 Year Silver Warranty
| Code | 70405 |
|---|---|
| Description | IP20 Surface Mount PIR Sensor with Adjustable Detection Range |
| Quality Assured Product Warranty | 5 Year |
| Water & Dust Protected | IP20 |
| Sensing | PIR |
| Mounting Options | Surface |
Technical Specification
| Construction | Polycarbonate Flame Retardant Body |
|---|---|
| Input Voltage | 200-220 VAC |
| Frequency | 50/60 Hz |
| Operating Temp | -20°C to +40°C |
| Load Capacity | LED 300W, Halogen 1200W |
| Time Delay | 10s - 7m |
| Lux Settings | <10 - 2000 Lux |
| Protection Class | Class II |
| Compliance | EN 60669-2-1 |
| Standard | LVD directive 2014/35/EU, EMC directive 2014/30/EU |
Dimensions
| ØxD (mm) | 80x38 |
|---|
Notes
BELL Lighting is constantly developing and improving its products. For this reason, all product descriptions in this data sheet are intended as a general guide, and BELL Lighting may change specifications from time to time in the interest of product development, without prior notification or public announcement. All descriptions in this data sheet present only general particulars of the goods to which they refer and shall not form part of any contract. Data in this guide has been obtained in controlled experimental conditions. However, BELL Lighting cannot accept any liability arising from the reliance on such data to the extent permitted.
