BELL lighting
Foxbridge sensor
IP20 2 in 1 Recessed/Surface Mount Microwave Sensor with Life Presence Detection
Key Features
- Suitable for all movement detection: Large (walking), Medium (waving of hands) & Small (head movement)
- Adjustable ambient time delay & sensitivity settings
- Seamless recessed fitting ceiling design
- Slim profile, unobtrusive design
- Dip Switch controls for precise settings
Product Details
Cut Out Ø76mm (Recessed Mount)
| Code | Description | DxØ (mm) |
|---|---|---|
| 70400 | IP20 2 in 1 Recessed/Surface Mount Microwave Sensor with Life Presence Detection | 35.5x93 |
Warranty
5 Year Silver Warranty
| Quality Assured Product Warranty | Water & Dust Protected | Sensing | Mounting Options |
|---|---|---|---|
| 5 Year | IP20 | Microwave | Recessed/Surface |
Technical Specification
| Construction | Polycarbonate Flame Retardant Body |
| Input Voltage | 200-220 VAC |
| Frequency | 50/60 Hz |
| Operating Temp | -20°C to +40°C |
| Load Capacity | LED 1000W, Halogen 2000W |
| Time Delay | 10 seconds, 1 minute, 5 minutes, 15 minutes |
| Ambient Settings | 10lux, 30lux, 100lux, Disabled |
| Protection Class | Class II |
| Compliance | EN 60669-2-1 |
| Standard | LVD directive 2014/35/EU, EMC directive 2014/30/EU |
Diagrammatic Information
Mounting Options:
- Surface Mount: Depicts a cylindrical device suitable for surface mounting.
- Recessed Mount: Shows a similar device designed for recessed installation.
Installation Height: The sensor is recommended for installation heights between 2.2m and 4m.
Detection Coverage:
- The sensor provides 360° coverage.
- Maximum detection distance is 6m.
- Coverage zones are indicated as 3m x 3m at the maximum range.
Cut Out Size: For recessed mounting, a circular cutout of Ø76mm is required.
Notes
BELL Lighting is committed to continuous product development and improvement. Specifications may change without prior notification. Information provided is a general guide and does not form part of any contract. Data obtained under controlled experimental conditions. BELL Lighting accepts no liability for reliance on this data.
