Dareu H101X Bluetooth Wireless Gamepad
User Manual
Contents
Controller Overview
A black wireless gamepad with orange accents on the joysticks and buttons. It features a DAREU logo at the top center, a D-pad on the left, ABXY buttons on the right, and various function buttons including SELECT, START, HOME, and a Turbo button. The joysticks are textured. LED indicators are present below the DAREU logo.
Package Contents
- Control Unit: 1x Dareu H101X Bluetooth Gamepad.
- Cable: 1x USB charging/connection cable.
- User Manual: 1x H101X User Manual.
Parameters
- Connection: Wired and Bluetooth
- Gyroscope: 6-axis
- Current: 30 ~ 110 mA
- Wireless Working Time: Approximately 25 hours
- Charging Time: Approximately 2.5 hours
- Dimensions: 160 x 105 x 60 mm
- Support: PC, Switch, iOS, Mac, Android TV, Android Smartphone
- Cable Length: 1.5 m
- Battery: 650 mAh
- Weight: 220 g
How to Connect
Multiple Platforms
| PC (Xinput) | PC (Dinput) | Switch | Android |
|---|
| Wired Connection | USB | USB | USB | |
| Identification | Automatic Identification | |
| LED Status | ●○○○ | ●●○○ | Automatic Assignment | |
| Vibration/Turbo | Supported |
| Other Functions | Dinput Xinput (Press HOME for 5s) | 6-axis Gyroscope / Swapped Buttons | |
| Wireless Connection | PC (Xinput) | PC (Dinput) | Switch | Android |
| BT | BT 5.0 | BT 5.0 | BT 5.0 | BT 5.0 |
| BT Name | Wireless Xbox Controller | | H101 BT |
| Pairing Buttons | X+HOME | | Y+HOME | A+HOME |
| Status LED Indicator | ○○○○ | | Automatic Assignment | ●●○○ |
| Vibration/Turbo | Supported |
| Other Functions | | | 6-axis Gyroscope / Swapped Buttons | |
Connection Diagrams
- Plug & Play: Depicts a USB cable connecting to a device.
- PC: Shows a gamepad connected via USB to a desktop computer.
- Switch: Illustrates a gamepad connected wirelessly to a Nintendo Switch console.
BT Mode Connection to Switch
- From the Switch home menu, navigate to System Settings → Airplane Mode.
- Then, go back to the Switch home menu and select Controllers → Change Grip/Order.
- Press the Y + HOME buttons on the controller; controller indicator lights 1~4 will start flashing, then begin pairing.
- Automatic pairing will then be used.
Connection to Smartphone
- Press the A + HOME buttons; indicator lights 1 and 2 will flash, then begin pairing.
- Turn on your Bluetooth device and search for 'H101 BT'.
- Pair and then use.
Note: If the device is an Android system, this pairing method is recommended.
Connection to PC
- Press the X + HOME buttons; indicator lights 2 and 3 will flash, then begin pairing.
- Turn on your Bluetooth device and search for 'Wireless Xbox Controller'.
- Pair and then use.
Note: This pairing method is more compatible, for example, with Windows, iOS, Mac, and Android systems.
Turbo Function
Press and hold the 'T' button, then press the button you wish to set for series input (Turbo function).
- First Operation: Manual burst.
- Second Operation: Automatic burst.
- Third Operation: Cancel burst.
Buttons supporting burst settings: A, B, X, Y, LT, LB, RT, RB.
TURBO Burst Speed Setting
- Press and hold the 'T' button, then use the right joystick up (to increase) or down (to decrease) the burst speed.
- Speed is divided into three levels: Slow, Standard, Fast.
- The LED flashing frequency will match the burst speed.
Tip: Pressing 'T' + 'SELECT' will clear all turbo settings.
Controller Functions
Sleep and Reconnection
If no operation is performed in wireless mode for 15 minutes, the controller will enter sleep mode. It can be reconnected by pressing the HOME button.
Low Battery Warning
If the battery level is below 10%, the indicator light will flash rapidly.
Button Swap
When connected to a Switch, press and hold the ABXY buttons simultaneously for 5 seconds. The channel indicator will flash, and the A-B, X-Y buttons will swap.
Note: This function is only available when connected to a Switch.
Gyroscope Calibration
- Press SELECT + HOME when the controller is off; the indicator lights will flash in pairs.
- Place the controller on a flat surface, then press the START button. LED2 indicator will light up.
- Shake the left and right joysticks twice along the edge (as shown in the original diagram, which depicts circular motion), then press the START button again. LED3 will light up, indicating calibration is complete.
Power On/Off
- To turn off the power, press the HOME button for 6 seconds.
- To turn on the power, press the HOME button for 2 seconds.
- If no operation is performed for 15 minutes, the controller will enter sleep mode. To wake up, press the HOME button for 2 seconds.
Note: Supports Switch host wake-up.
Mode Description
Xinput Mode
This is the standard Microsoft controller connection protocol. When connected, the computer recognizes the controller as an Xbox 360 controller and automatically sets the buttons, which is suitable for most PC games.
Dinput Mode
When playing PC games, especially with emulators, you may need to manually define the buttons. This mode is suitable for game emulators.
Mode Switching
A diagram of the gamepad with an arrow pointing to the HOME button, indicating that pressing it for 5 seconds will switch modes.
Difference
In the Windows operating system, the controller is compatible with both Xinput and Dinput modes. PC games generally use Xinput mode, while emulator games typically use Dinput mode.
