LS 40 WT
Model Numbers: 404S2 (1020140), 404R2 (1021340), 409R2 (1023322), 412R2 (1024192)
Technical Features
| Voltage Supply | 120V AC | Limit Switch Capacity | 40 Turns |
| Index Protection Rating | IP 44 | Temperature Working Range | 32°F to 140°F (0°C to 60°C) |
| Limit Switch Type | Progressive Adjustment (PA) | Insulation Class | Class 1 for 120V AC |
Offers control via power switching.
Dimensions
NOTE: Illustration dimensions in millimeters (mm).
- L1 (Total length): 18.46 in. (469 mm) for all listed models.
- L2 (Length excluding end fittings): 17.64 in. (448 mm) for all listed models.
- L3 (Length of motor body): 19.09 in. (485 mm) for all listed models.
- Cable Length: 6.5 ft (2 m).
- Maximum diameter: 1.37 in. (35 mm).
- Cross-section shows a diameter of approximately 1.18 in. (30 mm) and two mounting holes for screws.
There are two mounting holes for self-tapping screws (Dia. 4 mm, depth 9 mm, spaced 1.14" (29 mm) apart). Self-tapping mounting screws are included with each motor.
| Model | L1 | L2 | L3 |
|---|---|---|---|
| 404S2 | 18.46 in. (469 mm) | 17.64 in. (448 mm) | 19.09 in. (485 mm) |
| 404R2 | 18.46 in. (469 mm) | 17.64 in. (448 mm) | 19.09 in. (485 mm) |
| 409R2 | 18.46 in. (469 mm) | 17.64 in. (448 mm) | 19.09 in. (485 mm) |
| 412R2 | 18.46 in. (469 mm) | 17.64 in. (448 mm) | 19.09 in. (485 mm) |
Specifications
| 404S2 | 404R2 | 409R2 | 412R2 | |
|---|---|---|---|---|
| Torque | 4 Nm | 4 Nm | 9 Nm | 12 Nm |
| Nominal Voltage | 120V / 60Hz | |||
| Rated Current | 0.95A | 0.85A | 1.05A | 1.05A |
| Speed | 36 rpm | 18 rpm | 18 rpm | 10 rpm |
| Thermal Protection | 5 minutes | |||
| Sound Level | 57 dBA | 57 dBA | 54 dBA | 54 dBA |
*Sound level: According to standards ISO 3741 NF 31022 in dBA ref 1pW at nominal torque without end product.
Fabrication Recommendations
- Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications.
- Free plays must be minimized between the accessories and the end product tube to ensure quiet performance of the motor.
- Interior Tube Diameter (ID) ≥ 38mm must be respected to prevent contact with the basic motor tube.
- The 400 Series Drive Stop and Screw (9147894) is recommended to prevent noise and drive wheel separation from the motor shaft.
Type of Power Cable
Wired 120V AC / 60Hz, 4-Conductor Cable:
- White: Neutral
- Red: Direction 1
- Black: Direction 2
- Green: Ground
Certifications
CUS Certified
