Sonesse® 30 RTS 24V DC
Item #: 1241142
Technical Features
| Feature | Specification | Feature | Specification |
|---|---|---|---|
| Voltage Supply | 24V DC | Temperature Working Range | 32°F to 140°F (0°C to 60°C) |
| Index Protection Rating (interior use only) | IP 30 | Insulation Class | Class III |
| Limit Switch Type | Electronic | Antenna | 7.5 in. (19cm) wire length, must not be cut or lengthened. For greatest RF range, antenna must be exposed. |
| Limit Switch Capacity | 150 turns (limited to 6 minutes of rotation without stop) |
Dimensions
The motor body has a length of 17.6 inches (447mm) and a diameter of 1.5 inches (38mm).
The motor head is designed with mounting holes that are Ø 0.12 inches (3mm) in diameter and 0.275 inches (7mm) deep. These holes are compatible with M3.5 x 9mm Philips flat-head plastite screws.
The antenna is a 7.5-inch (19cm) wire. It is crucial that this wire is not cut or lengthened to achieve the greatest radio frequency range.
Specifications
| Specification | Value | Notes |
|---|---|---|
| Supply tolerance | 21.6–26.4V DC | |
| Rated current | 0.625 A | |
| Standby power | 0.2W | |
| Torque | 2 Nm | |
| Default speed | 25 rpm | |
| Speed range | 6 to 28 rpm (speed regulated and adjustable) | |
| Radio frequency | 433.42 MHz | |
| Thermal protection | 6 minutes | |
| Sound Level* | <47dB(A)* |
*Sound level: Power Level is according to standards ISO3741 in dB(A) ref 1pW typical value, at nominal torque and nominal speed, without application/end product.
Fabrication recommendations:
- Operational noise level is reduced when the motor, tube, and mechanical accessories are properly adapted to motorized applications.
- Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor.
- Interior Tube Diameter (ID) must be greater than 31mm.
- A motor crown adaptor between the motor and the end product tube is required to ensure concentric operation of the motor.
- The Sonesse 30 Series drive stop and screw (included with crown and drive) are recommended to prevent noise and drive wheel separation from the motor shaft.
Integrated Motor Plates (sold separately)
| Part Number | Description |
|---|---|
| 9025996 | Sonesse 30 Motor Plate, Rollease 360 R3-R8, includes 10 x 1.8mm screws. |
| 9025999 | Sonesse 30 Motor Plate, Acmeda 12mm, includes screws. |
| 9026003 | Sonesse 30 Motor Plate, Rollease Skyline, includes screws. |
| 9026093 | Sonesse 30 Motor Plate, M3 x 6mm Philips flat-head plastite screw. |
Optional Head Covers
Available optional head covers include:
- Optional Grey (#9027133)
- Optional Black (#9027134)
- White (supplied with motor) (#9027132)
Type of power cable
24V DC Power Cable:
- AWG24 - 1 Cable: 2 wire
- Includes a 9.8 inch (approx.) Weidmüller pigtail (non-removable).
Power Cable Lengths:
| Gauge | Length | Maximum Power Cable Length (to guarantee characteristics) |
|---|---|---|
| 14 AWG | 240 ft. | |
| 16 AWG | 150 ft. | |
| 18 AWG | 100 ft. |
A 9027985 Weidmüller 2-position connector is included and also sold separately.
