Lefant M1 Robot Vacuum Cleaner

1. Product Introduction

Congratulations on the purchase of your Lefant ROBOTS! We hope it brings you satisfaction. We trust your purchase will keep your home clean and provide you a high-quality life.

Should you encounter situations that have not been properly addressed in this User Manual, please contact our Customer Service Center. For more information, please visit the Lefant ROBOTICS official website: www.lefant.com or send email to the following address:

• NA: support.us@lefant.com
• EU: support.eu@lefant.com
• JP: support.jp@lefant.com

The Company reserves the right to make technological and/or design changes to this product for continuous improvement.

1.1 Packing List

The package includes the following items:

• Robot Vacuum Cleaner
• Docking Station & AC Adapter
• Dust bin water tank
• Mop holder & Re-usable mop
• Disposable Dry Mop
• Cleaning tool
• High Efficient Particulate Air (HEPA) Filter
• Side brush
• Filter sponges
• User manual

1.2 Part Name

Robot Components

Front View:

• Laser navigation sensors
• Start/pause button
• Return and charge button
• WiFi indicator
• Anti-collision sensor
• Fixed point mode button
• Bumper strip

Rear View:

• Dustbin Release Button
• Power Switch (I=ON, O=OFF)

Bottom View:

• Anti-falling sensor
• Universal wheel
• Charging electrode
• Side brush
• Roller Brush
• Drive wheel

Dust Bin Water Tank Components:

• Dust bin
• Water tank
• Filter Net
• Filter Sponge
• High Efficiency Filter (HEPA)

Docking Station Components:

Standard Docking Station:

• Power adapter
• Indicator light
• Infrared signal transmitter
• Charging electrode
• Power adapter socket

Docking Station for other models:

• Power adapter
• Indicator light
• Cleaning tool
• Infrared signal transmitter
• Charging electrode
• Power adapter socket

Mop Holder:

• Positioning of the mop

2. Preparation

2.1 Assemble and Charge

1. Remove Protective Film: Remove any protective film from the robot and docking station.
2. Install Side Brushes: Attach the side brushes to the robot. They should click into place.
3. Placement of Charging Base: Place the docking station on an open, flat area. Ensure there is at least 0.5m (1.64ft) clearance on the sides and 1.5m (4.92ft) in front. Connect the power supply and tidy up the power cord to avoid tangling.
4. Turn on the Robot: Use the power switch on the robot. 'I' means ON, 'O' means OFF. Reminder: The robot cannot charge when it is turned off.
5. Charging: Place the robot on the docking station, ensuring the charging electrodes align. A twinkling light indicates charging; a light that turns off means fully charged. A full charge takes 6-8 hours.

2.2 Using Environment Preparation

Tidy up the room:

• Organize items on the floor, such as wires, slippers, and other sundries, to avoid affecting the robot's operation. ⚠️
• If rugs have fringed edges, tuck them under the rug in advance. ⚠️
• Do not let the robot operate on wet floors. ⚠️
• The robot can climb objects up to 12mm high. If you do not want it to climb certain objects, please remove them. ⚠️

3. Using the Product

3.1 How to Use Buttons

• Fixed point mode button: Suitable for ground environments where debris is concentrated. The robot performs fixed-point cleaning in the designated area.
• Start/pause button: Single press to start or pause cleaning. Keep pressing for 3 seconds to enter Wi-Fi pairing mode. When cleaning for the first time, the robot builds a map using LDS. After the map is created, it cleans each home area systematically.
• Return and charge button: During cleaning, if the robot senses low power, it will automatically enter 'return to charging' mode and find the charging base.

3.2 Indicator Meaning

3.3 Floor-Mopping Functions

1. Open the lid on the water tank and add the appropriate amount of water.
2. Close the lid.
3. Attach the mop to the mop holder.
4. Snap the Dust bin water tank into the slot at the rear of the Robot.
5. Align and snap the mopping module into the mop bracket mounting holes at the rear of the Robot. A "click" sound will be made when the unit is in place.
6. Start mopping.

Tips:

• To prolong the life of the water tank, use purified or softened water.
• Do not use the mopping function on carpets.
• Empty the water tank immediately after mopping.
• When cleaning with the mopping function, fold the edges of the carpet to avoid contaminating the mop with foreign objects.

3.4 App Download and Configuration

Downloading and installation of the "Lefant" app:

Method I: Scan the following QR code, and then download and install the App as prompted.

(Description of QR code: A QR code is provided, which can be scanned with a smartphone to access the Lefant M1 Robot Vacuum Cleaner user manual online in various languages, including German, French, Italian, Spanish, and Japanese. It also links to the Lefant app download.)

Note: The robot works with 2.4GHz Wi-Fi networks only.

Method II: Search "Lefant" in the App store, download and install the Lefant app.

Tips:

• Follow the guidance in the Lefant app to register, login, and pair the robot.
• Please make sure that the mobile phone is connected to your Wi-Fi network before pairing the robot vacuum cleaner.

3.5 Maintenance

Dust Bin Maintenance

* When cleaning and maintaining the robot and its accessories, please unplug the charging stand.

1. Press and hold the Dustbin Release Button to remove the dust bin.
2. Open the dust bin latch and dump the garbage.
3. Remove the dust filter assembly.
4. Clean the Filter Net.
5. Tap the High Efficiency Filter to remove dust. Reminder: Do not wash the High Efficiency Filter with water, just tap lightly to remove dust. ⚠️
6. Clean the dustbin.

Water Tank Maintenance

* When cleaning and maintaining the robot and its accessories, please unplug the charging stand.

1. Remove the mop holder assembly, remove the mop and wash it with water. Leave it to dry in the sun. If disposable dry mops are used, they can be discarded after use.
2. When you have finished mopping, empty the water in the tank.

Other Maintenance

* When cleaning and maintaining the robot and its accessories, please unplug the charging stand.

1. Clean the anti-drop sensor: Ensure the sensitivity of the sensor.
2. Clean the universal wheel: Prevent hair from tangling.
3. Clean the charging electrode: Ensure successful charging.
4. Clean the driving wheel: Ensure clean smoothly.
5. Clean the roller brush: Ensure smooth cleaning.
6. Clean the Anti-collision sensors: Ensure sensitive obstacle avoidance.
7. Clean the side brush: Prevent hair from tangling.
8. Clean the charging electrode of the docking station: Ensure successful charging.

4. Abnormal Symptoms

4.1 Symptom Prompts

When the robot runs into trouble, its red indicator light will be on or flash, and an error message will be broadcast. The following table summarizes the corresponding causes:

* If the above method cannot resolve the problem, please try the following operations: turn on the ON/OFF button on the side to restart the robot.

4.2 Troubleshooting

If the following problems occur during the application process of the product, users can resolve them independently by comparison and inquiry.

* If the fault cannot be eliminated according to the operation in the table, contact our customer service representative.

5. Technical Parameters

Note: Since the product needs continuous improvement, the actual product shall prevail. Our company reserves the right to update the product.

Important Safety Instructions

WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire or serious injury.

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

For Household use only

When using an electrical appliance, basic precautions should always be followed, including the following:

1. The robot must be used in accordance with the directions in this User Manual. Our company cannot be held liable or responsible for any damages or injuries caused by improper use.
2. Do not allow to be used as a toy. Close attention is necessary when used by or near children. Do not allow children to sit on the vacuum.
3. Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Robot. Tuck rug fringe under the rug base, and lift items such as curtains and table cloths off the floor.
4. If there is a drop off in the cleaning area due to a step or stairs, you should operate the Robot to ensure that it can detect the step necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.
5. Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.
6. Please make sure your power supply voltage matches the power voltage marked on the Docking Station.
7. Do not handle or plug appliance with wet hands.
8. Non-rechargeable batteries are prohibited.
9. Do not use without dust bin and/or filters in place.
10. Do not operate the robot in an area where there are lit candles or fragile objects on the floor to be cleaned.
11. Do not use and store in extremely hot or cold environments (below -5°C / 23°F or above 40°C/104°F). Please charge the robot in temperatures above 0°C/32°F and below 40°C/104°F. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
12. Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.
13. Do not operate the robot in a room where an infant or child is sleeping.
14. For INDOOR use ONLY. Do not use the robot in outdoor, commercial or industrial environments. Do not use Appliance on wet surfaces or surfaces with standing water.
15. Do not allow the robot to pick up large objects like stones, large pieces of paper or any item that may clog the robot.
16. Do not use the robot to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.
17. Do not use the robot to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
18. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
19. Take care not to damage the power cord. Do not pull on or carry the robot or the Docking Station by the power cord, use the power cord as a handle, close a door on the power cord, or pull power cord around sharp edges or corners. Do not run the robot over the power cord. Keep power cord away from hot surfaces. Do not unplug by pulling on cord; to unplug, grasp the plug, not the cord.
20. If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
21. Do not use the Docking Station if it is damaged.
22. Do not use the robot or the Docking Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.
23. Turn OFF the power switch before cleaning or maintaining the robot. Turn off all controls.
24. The plug must be removed from the receptacle before cleaning or maintaining the Docking Station.
25. Remove the robot from the Docking Station, and turn OFF the power switch to the Appliance before removing the battery for disposal of the robot.
26. The battery must be removed and discarded according to local laws and regulations before disposal of the robot.
27. Please dispose of used batteries according to local laws and regulations.
28. Do not incinerate the robot even if it is severely damaged. The batteries can explode in a fire.
29. When not using the Docking Station for a long period of time, please unplug it.
30. Prevent unintentional starting. Ensure the switch is in the off position before connecting to battery pack, picking up or carrying the appliance. Carrying the robot with your finger on the switch or energizing the robot that has the switch on invites accidents.
31. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, etc., that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
32. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
33. Do not use a battery pack that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
34. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C/265°F may cause explosion.
35. Have servicing performed by a qualified repair person using only identical replacement parts.
36. Do not modify or attempt to repair the robot or the battery pack (as applicable) except as indicated in the instructions.
37. Do not operate the robot in a room that has lit candles on furniture that the vacuum may accidentally hit or bump into.
38. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
39. Use the robot only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
40. The robot contains batteries that are only replaceable by skilled persons. To replace the robot's battery, please contact Customer Service.
41. If the robot is not going to be used for a long time, fully charge the robot, power it OFF, and unplug the Docking Station.

SAVE THESE INSTRUCTIONS

To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

Correct Disposal of this Product

This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To recycle your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can safely recycle this product. ♻️

Federal Communications Commission (FCC) Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

RF exposure warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Caution (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF exposure statement: The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

(French translation of IC Caution and RF statement is available in the original document.)

Warranty

This warranty covers the repair or replacement of the malfunction device at our company's discretion for a period of 1-year. This certificate is void if altered. The serial number must be provided, as well as all accessories, to be eligible for warranty coverage. Please fill in the form below accurately and completely.

Order Number: _________________________

Serial Number: _________________________

Date of Purchase: _________________________

Important: When returning this device, carefully pack the product to avoid damage in shipping. Damage in shipping is not covered by the Warranty and shall be the sole responsibility of the Buyer. Damage or loss not covered by this Warranty or occurring outside the Warranty Period will require a fee to cover the cost of handling and shipping. All such fees and costs shall be the sole responsibility of the Buyer.

Exclusion: Unless agreed in writing, the warranty will not apply if the defects relate to:

• Consumable parts such as filters, or brushes etc., that are subject to normal wear and tear, and require regular maintenance and/or replacement to ensure the proper functioning of your unit.
• Defects caused by rough or inappropriate handling or use, or damage caused by accident, misuse, neglect, fire, water, lighting, or other acts of nature, external sources such as weather, electrical outages, or power surges.
• Improper operation or maintenance, use not in accordance with the product instructions, or connection to improper voltage supply.
• Accident, abuse, misapplication, or any unauthorized repair, modification, or disassembly of the product.
• Any failure to adequately package the Product for transportation.
• Use of parts not in accordance with the product instructions.
• Use of parts and accessories other than those produced or recommended by our company.
• Use in a commercial environment, as the Product is designed for residential use only.
• Consequential and incidental damages.
• Any product(s) purchased from unauthorized dealers/resellers.
• Products used outside the country of purchase.
• Lost and/or stolen products.

Contact Information

(Description of QR code: A QR code links to the Lefant official website.)

Website: www.lefant.com

Email:

• NA: support.us@lefant.com
• EU: support.eu@lefant.com
• JP: support.jp@lefant.com

Facebook: @LEFANTOFFICIAL

Community: facebook.com/groups/Lefantofficalcommunity

Company Address:

Shenzhen lohas Technology Co., LTD.
Building 2, Fashion Brand Industrial Park, E'Bu Town,
Shenzhen-Shanwei Special Cooperation Zone, Shenzhen, Guangdong, China.

Model Number: M1-LH20230129-V01