Baseus GaN5 Pro Desktop Fast Charger 1U+2C+HDMI 67W
User Manual
Product Specifications
- Name: Baseus GaN5 Pro 2-in-1 adapter
- Model No.: CCGAN67-HDS
- Input: AC 110-240V~, 50/60Hz, 1.5A Max.
- Type-C1 Output: 5V-3A; 9V-3A; 12V-3A; 15V-3A; 20V-3.35A Max.
- Type-C2 Output: 5V-3A; 9V-3A; 12V-3A; 15V-3A; 20V-3.35A Max.
- Type-C1+Type-C2 Output: 20W+45W Max.
- Type-C1 20W: 5V-3A; 9V-2.22A; 12V-1.67A
- Type-C2 45W: 5V-3A; 9V-3A; 12V-3A; 15V-3A; 20V-2.25A
- HDMI Output: 4K 30Hz
- Power Cord Length: 1.5m (4.92ft)
- Product Size: 96×46×38mm (3.78×1.81×1.50in)
- Product Weight: About 320g
- Cable Name: Full Featured Data Cable
- Cable Material: TPE
- Cable Length: About 1.0m (3.28ft)
- Cable Power: 100W
- Cable Data Rate: 40Gbps
- Cable Interface: Type-C to Type-C
- Note: The above data are measured by the Baseus laboratory; actual use may vary slightly.
Package Including
- Charger ×1
- Full-Featured Data Cable ×1
- User Manual ×1
- Warranty Card ×1
Schematic Display of Product
The product diagram illustrates the charger with its output ports. It shows four distinct connection points labeled: Type-C1, Type-C2, USB, and HDMI.
Product Description
This product integrates the functions of a HUB and a fast charger, offering a maximum total output of 67W. It utilizes Gallium Nitride (GaN) semiconductor material, resulting in a compact size. The charger features multiple output ports: two Type-C ports, one USB-A port, and one HDMI port. It supports various charging protocols including QC4+, PD3.0, QC3.0, QC2.0, PPS, SCP, FCP, AFC, PE+, and others. Additionally, it functions as a HUB and supports HDMI expansion, allowing connection to TVs or projectors. The USB-A port can connect to USB flash drives, wireless mice, or keyboards. This product is suitable for charging and expanding connectivity for laptops and Nintendo Switch consoles.
Use Environment
Storage ambient temperatures should be between -20 to 40 degrees Celsius.
Icon Description
The "10-year" icon signifies the "effective life of environmental protection," not the product's quality warranty period. Electronic products contain substances like lead, mercury, and cadmium. Extended use can lead to leakage or mutation of these substances, causing environmental pollution or harm to people and property. This period indicates the time frame for responsible use to minimize environmental impact. Baseus is not responsible for quality issues arising after this safe use period.
Tips
- Please read this manual carefully before use. Improper operation may damage the product or affect personal safety.
- The product may generate heat during operation, which is normal. It is ETL certified and safe to use.
- Do not store the product in environments with high temperatures, strong direct sunlight, or strong magnetic fields. Avoid placing it near fire sources or in other harsh conditions. If water enters the device, allow it to dry naturally before reuse.
- Improper use can easily lead to product damage or endanger personal and property safety. Consumers are liable for any damages resulting from misuse contrary to this manual; Baseus assumes no legal liability in such cases.
- Dismantling the product by non-professionals is strictly prohibited.
- Avoid actions that could damage the device, such as dropping, throwing, or stepping on it.
- The device has built-in over-temperature protection; the maximum output can be sustained for up to 30 minutes.
Compliance and Safety Information
This equipment complies with the provisions of Directive 2012/19/EU. It must not be disposed of with ordinary household trash; it must be recycled at an appropriate electronic and electrical equipment recycling center. This symbol [e-waste symbol] indicates the product should not be treated as regular domestic waste.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Please follow the above safety instructions; failure to do so may result in fire, electric shock, damage, or other injuries.
Certifications and Logos: The product displays markings for FCC, a house symbol with a "10" inside a circle [10-year environmental protection symbol], BDC (Baseus Data & Charge Merging Technology), and ETL (Certified to CSA Std. C22.2 No.62368-1, UL Std. 62368-1).
Supervising Company: Shenzhen Baseus Technology Co., Ltd.
Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen.
Manufacturer: Dongguan Kingtron Electronics Tech Co., Ltd.
Address: No.61 Pujiang Rd, Daning Village Hemen Town, Dongguan, China.
Hotline: +86-4000-712-711
Website: www.baseus.com
Designed by Baseus
Made in China
Model Number: PB3616Z-P0A1
