MX3 Wireless Earbuds Guide

Auto Pairing Setup

Follow these steps to pair your MX3 wireless earbuds with your device.

Illustration: An open charging case containing two wireless earbuds. The case has indicator lights at the front.

Open the charging case. Both earbuds will power on and automatically enter pairing mode. The LED light on each earbud will flash red and blue alternately.

Illustration: A smartphone screen displaying Bluetooth settings. The "MX3" device is listed under "DEVICES" and shows "Connected". A finger icon indicates selection on the "MX3" entry.

On your mobile phone, navigate to Bluetooth settings. Search for available devices and select "MX3" from the list to establish a connection.

For a quick overview of operations, refer to the Quick Operation Guide.

Touch Control

Effortlessly manage your audio, calls, and voice assistant using the intuitive touch controls on the earbuds.

Right Earbud:

Volume Up: Keep touching the touch area. Volume will increase progressively.
Next Track: Triple tap the touch area.
Play/Pause: Double tap the touch area.
Answer Call: Tap the touch area once.
Mute/Unmute Call: Tap the touch area once during an active call.
End Call: Double tap the touch area.
Reject Call: Keep touching the touch area for 1 second.
Activate Voice Assistant (Siri/Google Assistant): Tap the touch area once and hold for 1 second.

Left Earbud:

Volume Down: Keep touching the touch area. Volume will decrease progressively.
Previous Track: Triple tap the touch area.
Play/Pause: Double tap the touch area.
Answer Call: Tap the touch area once.
Mute/Unmute Call: Tap the touch area once during an active call.
End Call: Double tap the touch area.
Reject Call: Keep touching the touch area for 1 second.
Activate Voice Assistant (Siri/Google Assistant): Tap the touch area once and hold for 1 second.

Reset MX3 Earbuds

If you experience connection problems or wish to remove all previously paired devices, follow these reset instructions.

Illustration: Hands are shown placing two earbuds into an open charging case. A visual indicator suggests a 10-second duration.

Important Note: If your device displays "Unsuccessfully connected", first delete all existing "MX3" entries from your phone's Bluetooth device list.
Reset Procedure:
1. Ensure that Bluetooth is turned OFF on your mobile device.
2. Place both earbuds back into the charging case.
3. Simultaneously press and hold the touch-sensitive area on both earbuds for approximately 10 seconds. This action will clear all previously paired devices from the earbuds.
4. Upon successful resetting, the LED indicator lights on the earbuds will flash red and blue simultaneously.

Wearing the Earbuds

For a secure and comfortable fit, insert the earbuds into your ears and give them a slight twist to lock them in place.

Illustration: A side profile of a human ear. An earbud is depicted being inserted into the ear canal, with a green arrow indicating the insertion direction.

Illustration: A close-up view showing an earbud being placed into an ear. A subsequent diagram illustrates a gentle twisting motion of the earbud to secure it within the ear.

A slight twist ensures the earbuds remain locked in your ear.

Quick Operation Guide

This section provides a concise summary of common operations for your MX3 wireless earbuds.

Auto Pairing: Open the charging case; earbuds enter pairing mode (red/blue flashing LED). Connect to "MX3" in your phone's Bluetooth settings.

Touch Controls: Refer to the "Touch Control" section above for detailed instructions on tap gestures for volume adjustment, track selection, call management, and voice assistant activation.

Resetting Earbuds: Turn off your phone's Bluetooth. Place earbuds in the charging case, then press and hold both touch areas for 10 seconds until the LEDs flash red and blue simultaneously.