COSTWAY MU10066 Portable Keyboard Piano User Manual

Contact Us!

Do NOT return this item. Contact our friendly customer service department for help first.

E-mail:

• US: cs.us@costway.com
• UK: cs.uk@costway.com

Before You Start

Please read all instructions carefully and keep it for future reference.

Warning!

Attention: The Product is not suitable for the children under 3 years

Danger: Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.

⚠ CHOKING HAZARD - Small parts. Not for children under 3 years.

General Warnings

• The product must be installed and used under the supervision of an adult.
• Read through each step carefully and follow the proper order.
• Remove all packaging, separate and count all parts and hardware.
• Please ensure that all parts are correctly installed; incorrect installation can lead to a danger.
• We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Ensure a secure surface during construction, and place the product always on a flat, steady and stable surface.

Interface Function Diagram

The interface includes controls for Power, Chord, Metronome, Volume (Vol+/Vol-), Transpose (Transpose+/Transpose-), Tone (Tone+/Tone-), Play, Vibrato, Drum kit, Tempo (Tempo+/Tempo-), and Rhythm (Rhy+/Rhy-).

Ports available are:

• [USB]: Power/MIDI interface
• [SUS]: Sustain pedal
• [MP3]: Audio input
• [MIC]: Microphone

Additional controls include Power, Start/Stop, Demo, Chord, OKON, Metronome, Drum kit, Record, Play, Sustain, Vibrato, Vol+, Vol-, Rhy+, Rhy-, Tone+, Tone-, Tempo+, Tempo-, Transpose+ (for adjusting key force), Transpose- (for LED teaching function).

Charging

Please charge this piano before using.

Charging Indicator

When the piano is plugged into USB for charging, a red light turns on. The light changes color when the battery is full.

• Battery: High-capacity lithium battery. Charging time is approximately 4 hours. For the first use, please charge for more than 5 hours.
• Charging adapter: 5V 1A

Protection Function

If the lithium battery voltage drops too low (Below 3.5V), the product will automatically reset or may not start. A charging reminder is indicated by the piano automatically stopping playback and restoring to its initial state when the battery is critically low.

MIC Function

A fixed reverb function is included to enhance the user's experience when playing and singing simultaneously.

Audio Output

The piano can connect to an external active speaker or audio power amplifier and headphones for a double channel sound output. It supports three-line earphones and external speakers, as well as four-line headphones with a microphone. A 3.5V stereo headphone plug is recommended.

MP3 Function

Connect to MP3 or other external audio sources for a double channel surround sound effect.

Sustain Pedal

[SUS]: Sustain pedal, prolongs the end time of the keys' sound.

MICRO_USB Function

[MICRO_USB]: Charging interface and MIDI connection function.

MIDI Function

1. Connect the computer with a [MICRO_USB] data cable and open the corresponding software to use the MIDI function. Software with MIDI transmission protocol (e.g., Everyone Piano) can be used with your computer.

Controlling external devices via piano:

• Play the keyboard; the piano sends MIDI data to the external device via the USB interface, producing sound from the external device.

Controlling piano through external devices:

• Use a USB cable to connect external equipment. Select the piano as the external device's MIDI output method. The piano can be used as an external sound source.

2. Bluetooth APP connection (refer to the last page).

Speakers and Sound Effects

The piano features two built-in quality external speakers. The sound field effect aims to immerse the user in the music.

Sound Effects

Two types of sound effects are built-in: Sustain/Vibration. In the current mode, pressing Sustain and Vibration again can exit the current mode and return to normal mode.

Hardware

Built-in amplifier circuit.

Demo Songs

There are 20 demo songs. Press the demo button to choose.

Chord Function

When playing rhythm, press the chord function and then press the multi-fingering method within the range of keys A1-F4#. The corresponding chord accompanying sound can be heard. If you press the single-fingering chord, the chord of single-finger will be played. Press the chord button again to close the chord function.

Table of Single-finger Chords (example)

The diagram illustrates single-finger chord voicings for different chord types (M, 7, m7) across various keys (C, C#, D, etc.).

Transpose

Transpose+/-: Starts at level 0, with a range of 0-6 and 0--6. Pressing Transpose for 1.5 seconds toggles the LED teaching function (if equipped). Pressing Transpose+ for 1.5 seconds toggles the function for adjusting the key's knocking force.

Volume

Vol+/-: Starts at level 14, with a maximum level of 17 and a minimum of 0.

Tempo

Tempo+/-: The default speed is 120. The maximum adjustable speed is 300, and the minimum is 30. Different DEMO songs may display different speeds; the actual speed prevails.

Tone

Tone+/-: Press Tone+ or Tone- to select a tone. There are 128 kinds of tones available (refer to the attachment for details).

Rhythm

Rhy+/-: Press Rhy+ or Rhy- to select a rhythm. There are 128 kinds of rhythms available (refer to the attachment for details).

OKON Function

Press the OKON button to enter the teaching mode automatically. Demo song accompaniment plays in a continuous loop, waiting for the user to play. Touching any key plays the main theme of the demo song. Press the OKON button again to select the loop. Press Start/Stop to stop the demo song accompaniment.

Metronome

Press the Metronome function to activate a beat sound. The metronome will play at the current speed. Press Start/Stop to turn off the metronome.

Recording Function

1. Press this button to enter recording mode and hear the metronome sound. Press any key to start recording. The maximum recording capacity is 700 notes. When full, the metronome sound stops, and further recording is not possible. Recorded content can be played back by pressing the "Play" button.

2. Press the "Play" button for the first time to play recorded notes; press it again to stop playback.

3. Press the "Play" button to exit the recording mode.

4. If no value has been recorded, pressing "Play" will have no effect.

Drum Kit

Press this button to activate the drum's tone on the corresponding keys.

88 Keys Drum Kit Corresponding Table

This table maps specific keys on the keyboard to different drum sounds.

Welcome

Welcome to visit our website and purchase our quality products!

With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!

US office: Fontana, California

UK office: Ipswich

Customer Benefits:

• Reward Points
• Exclusive Customer Service
• Personalized Recommendations
• Permanent Shopping Cart
• Order History

5 Star Rating

★★★★☆

We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks.

Thank You