Costway Portable Air Conditioner FP10348

Introduction

Thank you for choosing the Costway Portable Air Conditioner. This manual provides important safety information and instructions for operation, installation, and maintenance. Please read carefully before use and keep for future reference.

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• Assemble near the area of use to avoid unnecessary moving.
• Always place the product on a flat, steady, and stable surface.
• Keep small parts and packaging away from children to prevent choking hazards.

Notes

• The air conditioning is suitable for indoor use only.
• Follow local grid interconnection rules and ensure proper grounding. Consult a professional electrician if needed.
• Place the machine in a flat and dry place, at least 50cm/20" away from surrounding objects or walls.
• Ensure the power plug is intact and firmly plugged in. Keep the power cord orderly to prevent tripping.
• Do not put objects into the air inlet and outlet. Keep them free from obstructions.
• Ensure drainage pipes are properly connected and not distorted or bent.
• Adjust wind-guide strips gently to avoid damage.
• When moving the machine, keep it upright.
• Keep the machine away from gasoline, flammable gas, stoves, and other heat sources.
• Do not disassemble, overhaul, or modify the machine. Seek professional repair for malfunctions.
• Do not install or use in bathrooms or other humid environments.
• Do not pull the plug to turn off the machine.
• Do not place cups or objects on the body to prevent liquid spillage.
• Do not use insecticide sprays or flammable substances nearby.
• Clean with a soft, damp cloth. Avoid chemical solvents. Use mild detergent for heavy dirt.
• The appliance can be used by children aged 8+ and persons with reduced capabilities if supervised and instructed on safe use. Children should not play with the appliance. Cleaning and maintenance should not be done by unsupervised children.

Features and Components

Features

• New look, compact structure, streamlined design.
• Cooling, dehumidification, fan, and continuous water drainage functions.
• LED display control panel.
• High-quality remote control.
• Outdoor interface for easy assembly and heat pipe flow.
• Air filtration function.
• Timing switch function.
• Automatic compressor restart protection.

Components

Mask

Front Housing

Top Cover

Swing leaf

Rear Housing

Omni-directional wheel

Upper EVA filter

Air Vent

Drainage Hole

Continuous Drainage Hole

CON filter housing

Handle

Exhaust Pipe Assembly

Window Sealing Plate Assembly

Drain Hose

Installation and Adjustment

1. Installation

• Warning: Keep upright for at least two hours before use.
• The air conditioner is easily moved; ensure it remains upright and on a flat surface. Do not install in bathrooms or humid environments.
• 1.1 Install the pipe assembly: Screw the exhaust fitting end into the exhaust port on the rear panel.
• 1.2 Install the window sealing plate assembly:
  • Half open the window and mount the assembly to the window (horizontal or vertical).
  • Adjust the assembly components to bring ends into contact with the window frame and fix them.
• 1.3 Install the body:
  • Move the machine with pipes to the window, ensuring at least 50cm/20" distance from walls or objects.
  • Elongate the exhaust pipe and snap the flat end into the window sealing plate assembly hole.

Notes:

• The flat end of the exhaust pipe joints must be snapped into place.
• The pipe should not be distorted or have substantial turning (more than 45°). Keep the exhaust pipe ventilation unblocked.

Important Notice: The exhaust hose length should be 280-1,500mm. Do not use extension tubes or replace with different hoses, as this may cause malfunction or overheating. Ensure the exhaust hose is not blocked.

Control Panel Setting

I. Operating instructions: LED Control Panel

The LED Control Panel includes the following keys:

• 1. SWING Key: Controls oscillation function.
• 2. TIMER Key: Sets the timer (1-24 hours).
• 3. FAN SPEED Key: Selects high, medium, or low speed (not available in SLEEP or DEHUMIDIFYING mode).
• 4. UP Key: Increases temperature or timer setting.
• 5. Display Window
• 6. DOWN Key: Decreases temperature or timer setting.
• 7. MODE Key: Switches between Cooling, Heating, Fan, and Dehumidifying modes.
• 8. Sleep Mode: Activates sleep mode (low fan speed, not adjustable). Can be canceled by pressing the button again.
• 9. POWER Key: Turns the unit on and off.

Operating Instructions of the Remote Control

The remote control panel includes:

• 1. Power: Press to turn the unit on/off.
• 2. Timer: Press to set the timer.
• 3. Auto-Swing Function: Press to start oscillation mode.
• 4. Sleep: Press to turn on sleep mode.
• 5. Down: Press to reduce temperature and adjust timer setting.
• 6. Up: Press to increase temperature and adjust timer setting.
• 7. Mode: Press to switch between cooling, heating, dehumidifying, and fan-only modes.
• 8. Fan: Press to select high or low fan speed.
• 9. Temperature unit converter: Switches between °F and °C.

Notes:

• Do not activate sleep mode in Dehumidifying or Fan mode.
• The waterfull lamp and buzzer indicate the water tank is full; the compressor will stop working.

A Variety of Protection Functions

3.1 Frost Protection Function

In cooling, dehumidifying, or energy-saving mode, if the exhaust pipe temperature is too low, the machine enters protection status. It reverts to normal operation when the temperature rises.

3.2 Overflow Protection Function

When the water pan exceeds the warning level, an alarm sounds and the "FULL" indicator flashes. Drain the water using the drainage pipe or water outlet. The machine returns to its original state after draining.

3.3 Automatic Defrosting

This function is available in cooling mode.

Drainage Instructions

1. Manual drainage

• When the water is full, turn off the machine and unplug it.
• Move the machine carefully to avoid spilling water.
• Place a water container below the side water outlet.
• Unscrew the water plug; water will flow into the container.

Notes:

• Keep the water plug properly.
• Tilt the body slightly backward during drainage.
• If the container cannot hold all the water, plug the outlet promptly to prevent spillage.
• Reinstall the water plug after draining. Restart the machine after the plug is installed.

2. Continuous drainage (Optional)

• Unplug the water plug.
• Place the drainage pipe into the water outlet.
• Connect the drainage pipe to a bucket.

Maintenance

Cleaning:

• Turn off and unplug the machine before cleaning or maintenance.
• 1. Clean the surface: Use a soft, damp cloth. Avoid chemicals like benzene, alcohol, or gasoline.
• 2. Clean the filter screen: Clean every two weeks if clogged.
• 2.1 Clean the upper filter screen frame:
  • Grasp the EVA filter screen frame wedge block and pull down from the outside to remove it.
  • Unscrew four screws to remove the EVA filter screen and rear housing.
  • Wash the EVA filter screen in warm water with mild detergent (approx. 40°C / 104°F) and dry in the shade after rinsing.

3. Unit Storage

• Unscrew the drainage cover, unplug the water plug, and drain the water.
• Turn on the machine in low-wind ventilation mode until the drainage pipe is dry to prevent mildew.
• Turn off the machine, unplug it, wrap the power cord, and install the water plug and drainage cover.
• Remove and store the exhaust pipe properly.
• Cover the air conditioner with a plastic bag and store in a dry place, out of reach of children.
• Remove and store remote control batteries properly. Ensure the unit is stored in a dry place with all components.

Troubleshooting

Do not repair or disassemble the air conditioner yourself. Unqualified repair can cause damage.

Note: If problems not listed occur or solutions don't work, contact professional service. For technical parameters, refer to the product nameplate. Costway reserves the right to change designs without notice.

Treatment: Do not discard abandoned machines with unsorted waste. Dispose of them separately.

Smart Life (Wi-Fi) Guide

OPERATION GUIDE:

• Ensure your mobile device is connected to WiFi router, and the router is connected to the Internet.

Download and Install APP

• Scan the QR code or search "Smart Life" in the app market to download and install the App.

Step 1 Register/Login

• Open the Smart Life App and start registration. Register an account or log in via SMS verification code.
• Follow the on-screen prompts for registration.

Step 2 Add a new Smart Air Conditioner

• Plug in the unit to keep it in standby mode.
• Touch the WiFi button on the unit panel for 3-5 seconds until the LED indicator flashes continuously. (If no "WiFi" button, press "Fan speed" for 3 seconds).
• Return to the Smart Life homepage and log in.
• Select your device to add it.
• Fill in the WiFi password and confirm.
• Once added successfully, you can control the unit remotely.

Step 3

• Turn your air conditioner on and off.
• Change working modes and set the temperature.
• Adjust fan speeds for comfort and energy savings.
• Set schedules to program a customized timer.

Return / Damage Claim Instructions

EN

• DO NOT discard the box/original packaging. Items must be returned in the original box.
• Take a photo of the box markings (text) for part identification.
• Take a photo of the damaged part (if applicable) for claim processing.
• Email the requested images and claim description directly from the marketplace where the item was purchased.

FR

• NE PAS jeter la boîte/l'emballage d'origine. L'article doit être retourné dans sa boîte d'origine.
• Prenez une photo des marquages de la boîte pour identification des pièces.
• Prenez une photo des dommages (le cas échéant) pour le traitement des réclamations.
• Envoyez un e-mail avec les images demandées et une description de la réclamation directement depuis le marché où l'article a été acheté.