Solar-Powered Security Camera System SolarCam Max/Pro System
Quick Start Guide
United States: +1-866-905-9950 Mon-Fri 9AM-5PMPST United Kingdom: +44-20-3885-0830 Mon-Fri 9AM-5PMGMT Germany: +49-32-221094692 Mon-Fri 9AM-5PMCET Japan: +81-50-5840-2601 Mon-Fri 9AM-5PM ( JST )
support@aosulife.com
www.aosulife.com
@aosulife
TABLE OF CONTENTS
01 Getting Started 02 Product Overview 03 Connecting the Homebase 04 Setting Up the System 05 Mounting the Camera 06 Charging the Camera 07 Safety Statement 08 Customer Service
P02 P03 P04 P05 P06-P13
EN
P14 P15-17
P18
01
Getting Started
SolarCam Max/Pro
SolarCam Max/Pro
USB-C Charging Cable
Mounting Bracket
Mounting Base
1 Mounting Screws and Anchors
HomeBase
Power Adapter for HomeBase
EthernetCable
EN Security Sticker
Solar Panel
Quick Start Guide
Solar Panel
Universal Joint
Socket nut
Locking Screw Cap
Mounting base
2 Mounting Screws and Anchors
02
Product Overview
HomeBase
USB port Ethernet port
SYNC button Power port
Status LED Speaker
EN
Wire-Free Security Camera
Status LED Lens Spotlight Microphone Motion sensor
SYNC button
Speaker USB-C port
03
CONNECTING THE HOMEBASE
Connect the HomeBase to the Internet
1. Power on the HomeBase, then use the ethernet cable provided to connect the HomeBase to your home router.
EN
2. The LED indicator turns blue (this may take up to 1min) when HomeBase is ready for setup.
04
SETTING UP THE SYSTEM
Download the App and Set up the Systems ready for setup.
Download the 'aosu' app from the App Store (iOS devices) or Google Play (Android devices).
Sign up for a 'aosu' app account, then follow the onscreen instructions to
complete the setup.
EN
05
MOUNTING THE CAMERA
Find a Good Mounting Spot
To find a spot to mount Wire-Free Security Camera, you need to test wireless signal strength. æ Open the 'aosu' app, go to Camera Settings > Mounting Guide. ç To test the wireless signal strength, take your camera and phone to the location where you want to mount the camera. è Move the camera as close to the HomeBase as possible if the wireless.
EN
06
Select Height and Location
Hang Wire-Free Security Camera 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor of Wire-Free Security Camera. Avoid placing Wire-Free Security Camera under direct sunlight.
EN
7-10 ft (2 - 3 m)
Cammeerraa fifeiledld off viveiwew
MMoottiioonn DDeetteccttioinon Zone
Up to 30 ft (10 m)
07
Mount the camera
The camera can be mounted both indoors and outdoors. 1. Drill holes with a 15/64 inch (5.95mm) drill bit, then insert the anchors
into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Firmly nailed the mounting base onto the wall.
1 Mounting Screws
EN
2. Tighten the camera to the mounting bracket.
08
3. Accurately snap the camera to the mounting base.
1 2
4. Adjust the viewing angle by checking the live stream feed in the
'aosu'app.
EN
09
Installation instruction of Solar Panel
Place Solar Panel in an area with consistent sunlight throughout the year.It only needs a few hours of direct sunlight each day to keep your camera powered. The amuont of energy that the solar panel produces is affected by weather conditions,seasonal changes, geographic loction,etc.
1. Fix the base to your mounting location using the included screws.If the installation surface is soft or unstable,first use a 6.0 drill bit to drill a hole in the wall,then insert the anchor nail into the hole,and fix thebase with screws.
Wall Anchors Base
EN
2 Mounting
Wall
Screws
2. First,install the locking screw cap into the universal joint and then screw the circular socket nut into the universal joint.
Locking Screw Cap
Front
Socket nut
Universal Joint
Back
10
3. Screw the universal joint into the back of the solar panel.Tighten it firmly with the attached nut. Solar Panel
4. Screw the locking screw cap into the base.Make sure that the universal joint is angled upward.
Base EN
Locking Screw Cap 5. When adjusting the solar panel left or right,loosen thelocking
screw cap,turn the sleeve rod,and tighten thelocking screw cap when the panel is in position.
Locking Screw Cap
11
Sleeve Rod
Locking Screw Cap
6. Solar panel's angle can be adjusted up and down up to 90°.
°
EN
Tip: After the installation is complete,please check that all locking mechanisms are tightly secured.
°
12
Installation instruction of solar panel
1. keep the installation angle of solar panels about 30-45° with the horizontal plane, as shown in the picture below.
2. The installation between the solar panel and the camera is shown in the following figure (open up the silicone cover at the bottom of the camera, remove the small center part of the cover, insert the power cord through the opening and plug it into the USB-C Port and then close the cover taking up any slack in the power cord from the solar panel) .
EN
3. Take care to install the solar panel so that the sun is not blocked by any items such as eaves, trees branches, etc.
4. Tighten the camera to the mounting bracket.
13
CHARGING THE CAMERA
Method 1
Method 2
EN
5V/2A
14
Satety Statement
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment. Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
EN
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. (4) Consult the dealer or an
experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
15
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Glazero Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
For the declaration of conformity, visit the Web site:https://www.aosulife.com/.
This product can be used across EU member states.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for HomeBase and accessories is -10°C-45°C.
The suitable temperature for Video Doorbell and accessories is -20°C - 40°C .
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C ~ 25°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm between the device and the
EN
human body. To maintain compliance with RF exposure requirement, use
product that maintain a 20cm distance between the device and human body.
For HomeBase: Wi-Fi Operating Frequency Range:2412~2472MHz ; Wifi Max
Output Power: 17.13dBm(EIRP)
Wi-Fi Operating Frequency Range: 5150MHz ~ 5850MHz, Wifi Max Output
Power: 13.7dBm(EIRP)
For Video Doorbell :
Wi-Fi Operating Frequency Range: 2412~2472MHz ; Wi-Fi Max Output Power:
18.30 dBm
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
16
Battery warning
· Replacement of a battery with an incorrect type that can defeat a safeguard (for example,in the case of some lithium battery types).
· Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
· Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
· A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
IC Caution:
User manuals for licence-exempt radio apparatus shall contain the following
or equivalent notice in a conspicuous location in the user manual or
alternatively on the device or both.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
EN
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC SAR Warning:
This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Lors de l' installation et de l' exploitation de ce dispositif, la distance entre le radiateur et le corps est d 'au moins 20 cm.
17
Customer Service
Warranty
12-month limited warrantcy The actual warranty period shall be implemented according to the requirements of local laws and regulations
Email Us
Customer Support: support@aosulife.com
Call Us
United States: +1-866-905-9950 Mon-Fri 9AM-5PMcPST United Kingdom: +44-20-3885-0830 Mon-Fri 9AM-5PMcGMT Germany: +49-32-221094692 Mon-Fri 9AM-5PMcCET Japan: +81-50-5840-2601 Mon-Fri 9AM-5PM ( JST )
Facebook @aosulife
EN
Twitter@aosulife
YouTube @aosulife
18
Aosu SolarCam P1 SE System: Quick Start Guide Get started with your Aosu SolarCam P1 SE Solar-Powered Wireless Security Camera System. This guide covers what's included, product overview, system setup, mounting, important notices, and customer service.
Aosu SolarCam D1 SE Quick Start Guide This guide provides essential information for setting up and using the Aosu SolarCam D1 SE Solar-Powered Wireless Security Camera. It covers package contents, product overview, system setup, mounting instructions, important notices, and customer service details.
Aosu SolarCam D1 Max Quick Start Guide Get started with your Aosu SolarCam D1 Max solar-powered wireless security camera and spotlight. This guide provides essential information on setup, installation, and product features.
Aosu SolarCam D1 Classic Quick Start Guide A quick start guide for the Aosu SolarCam D1 Classic, a solar-powered wireless security camera. Learn about setup, installation, and features.
Aosu SolarCam Max/Pro System Quick Start Guide A quick start guide for the Aosu SolarCam Max/Pro System, a solar-powered security camera system. This guide covers product overview, setup, mounting instructions for the camera and solar panel, charging, and customer service information.
AOSU SolarCam P1 Lite Quick Start Guide: Setup and Installation Get started with your AOSU SolarCam P1 Lite wireless security camera. This guide provides quick start instructions, installation tips, product overview, and customer support information for easy setup and optimal performance.
