Manuals+

TAG-N-TRAC: MERAKI INTEGRATION GUIDE

SUPPLY CHAIN VISIBILITY SOLUTIONS

Please follow the following steps for integration using your Meraki dashboard:

  1. Enable Bluetooth radio scanning

    Select "Wireless" ? "IOT Radio Settings" ? Bluetooth Scanning ON.

    Refer to Figure 2 for a visual representation of the Meraki IoT Radio Settings interface.

  2. Configure webhook

    1. Go to section "Location and scanning" (select "Network-wide" ? "General" scroll down).
    2. Select "Scanning API" ? enabled ?.
    3. Configure POST URL:
      • URL should be set to https://api.tagntrac.io/device/meraki/data
      • Secret should be set to your ORG key (from Tag-N-Trac dashboard settings).
      • API version = v2
      • Radio type = Bluetooth
    4. Provide your Tag-N-Trac support representative with your "validator" code (currently provided via email). This is required for the Tag-N-Trac account to respond correctly to the Meraki authentication challenge.
    5. After confirmation that the validator string has been configured, press the "validate" button. The status icon should change to show validation successful ✔️.

    Refer to Figure 1 for a visual representation of the Meraki Location and scanning interface, including the Scanning API and POST URL configuration.

  3. View Tag-N-Trac devices

    Tag-N-Trac Bluetooth devices within range of any of your Meraki devices can now be seen on the Tag-N-Trac dashboard.

REFERENCE FIGURES

Figure 1: Location and scanning

This figure shows a screenshot of the Cisco Meraki dashboard's "Location and scanning" configuration page. On the left navigation pane, "Network-wide" is selected under "Network", and "Wireless" is selected under that. The main content area displays settings for "Location and scanning". Key elements visible include:

  • Analytics: Shows "Analytics enabled".
  • Scanning API: Shows "Scanning API enabled" with a validator string (e.g., c4d41408bc3523097f075c7bc3db64ff640443a7).
  • Post URLs: A table listing configured POST URLs. The primary entry shows:
    • Status: A red dot (indicating it might not be fully validated or active yet, though the text implies it should be).
    • Post URL: https://api.tagntrac.io/device/meraki/data
    • Secret: Masked with dots (................).
    • API Version: V2
    • Radio Type: Bluetooth
    • A "Validate" button is present.

Figure 2: IoT Radio Settings

This figure displays a screenshot of the Cisco Meraki dashboard's "IoT Radio Settings" page. The left navigation pane shows "Network", "Evonexus", "Network-wide", "Wireless", and "Cameras". The main content area is dedicated to "IoT Radio Settings" and includes sections for:

  • Bluetooth: A general section for Bluetooth settings.
  • Scanning: Options to turn "Scanning" ON or OFF. A note indicates "Visit the Bluetooth clients page to see clients".
  • Beaconing: A section stating "Use APs as location markers. For more information, see our documentation." An "Advertising" toggle is present with ON/OFF options.
  • Buttons for "Cancel" and "Save" are at the bottom, with a note: "(Please allow 1-2 minutes for changes to take effect.)".
Models: Supply Chain Visibility Solutions, Supply Chain, Visibility Solutions, Solutions

File Info : application/pdf, 2 Pages, 253.43KB

PDF preview unavailable. Download the PDF instead.

tag-n-trac meraki-integration-guide

References

Microsoft Word for Microsoft 365

Related Documents

Preview Tag-N-Trac SmartSense Tag ST300-MM User Manual
User manual for the Tag-N-Trac SmartSense Tag ST300-MM, detailing its features, components, charging methods, LED status indicators, customer dashboard integration, and FCC compliance information.
Preview Tag-N-Trac SLB1 Smart Sense Label User Manual
User manual for the Tag-N-Trac SLB1 Smart Sense Label, a flexible Bluetooth tracking device for real-time asset location and condition monitoring in logistics and industrial applications.
Preview Tag-N-Trac SmartSense Label SSL300 User Manual
User manual for the Tag-N-Trac SmartSense Label SSL300, detailing its features, charging, dashboard usage, and regulatory compliance.
Preview EMC Test Report for Tag-N-Trac SAM500 Smart Sense Asset Monitoring Tag
Official EMC test report for the Tag-N-Trac SAM500 Smart Sense Asset Monitoring Tag, detailing radiated emission test results and compliance with FCC Part 15, Subpart B, Class B standards. Conducted by CVC Testing Technology Co., Ltd.
Preview Tag-N-Trac SmartSense Tag User Manual
User manual for the Tag-N-Trac SmartSense Tag, providing information on its features, charging, LED indicators, and FCC compliance.
Preview ST100-SU Series Asset Tracker User Manual
User manual for the TAG-N-TRAC ST100-SU Series asset tracker. Learn about its global connectivity via Cat.M1, integrated sensors for movement, light, and geofence, multiple positioning technologies, data encryption, and configuration options for efficient asset management.