Tag-N-Trac SmartSense Tag ST300-MM

User Manual

About This User Manual

This user manual explains how to use Tag-N-Trac's ST300-MM, a multi-mode SmartSense tag. The intended audience is users who will be receiving samples of the SmartSense tag for test, evaluation, or deployment. The SmartSense tag is currently in production.

What is included in the box?

The SmartSense Tag is shipped with a magnetic charging cable.

[Image: A blue Tag-N-Trac SmartSense Tag device is shown next to its magnetic charging cable. The device has a screen displaying '24.5' and icons, along with indicator LEDs.]

Device Overview

Front and back of the SmartSense Tag

[Image: The front of the SmartSense Tag displays a screen showing sensor readings (e.g., 24.5), a QR code, and indicator LEDs (Blue, Green, Red). The back of the tag shows regulatory markings like FCC and CE, and a model number 'ST100'.]

Front: Light sensor, Wakeup button, Blue, Green, Red LEDs, QR code for serial number and IMEI, Sensor readings.

Back: Magnetic charging port.

Side View of the SmartSense Tag

[Image: The side view of the SmartSense Tag shows a USB-C connector and a power reset button.]

Side: Power reset button, USB-C connector.

Charging the Device

USB-C port

The USB-C port is used for charging the device. A standard USB-C cable is required.

[Image: The SmartSense Tag is shown being charged via its USB-C port using a USB-C cable.]

Magnetic charging port

The device can also be charged using the magnetic charging cable.

[Image: The back of the SmartSense Tag is shown connected to its magnetic charging cable.]

LED Status Indicators

Color	Charging State (with charger plugged in)	BLUE (Network activity state)	RED (Alarm state)
GREEN Blinking	Precharging	On (Network activity)	Alarm
GREEN Solid On	Charging	Off (No network activity)	OFF (No alarm)
GREEN Off	Fully charged

Device Buttons

Wakeup button

The wakeup button is used to spontaneously wake up the device and capture the latest sensor data. The device will wake up, read, and store the sensor data, but will not upload it to the cloud at this time.

Reset button

The reset button is used to reset the power to the device.

Data Management

Tag-N-Trac Customer Dashboard

Data captured by the SmartSense Tag is uploaded to Tag-N-Trac's cloud at a pre-defined interval. This data and related analytics can be visualized on the Tag-N-Trac customer dashboard.

[Image: A screenshot of the Tag-N-Trac customer dashboard. It shows a list of devices with their status, sensor readings (temperature, humidity, pressure), last reported times, and a map view displaying device locations. A graph shows historical sensor data for a selected device.]

More details regarding the Dashboard can be found in TNT's Cloud User Manual.

Regulatory Information

FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

RF Exposure

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20cm from all persons.

	Tag-N-Trac SmartSense Label SSL300 User Manual User manual for the Tag-N-Trac SmartSense Label SSL300, detailing its features, charging, dashboard usage, and regulatory compliance.
	Tag-N-Trac SmartSense Tag User Manual User manual for the Tag-N-Trac SmartSense Tag, providing information on its features, charging, LED indicators, and FCC compliance.
	EMC Test Report for Tag-N-Trac SAM500 Smart Sense Asset Monitoring Tag Official EMC test report for the Tag-N-Trac SAM500 Smart Sense Asset Monitoring Tag, detailing radiated emission test results and compliance with FCC Part 15, Subpart B, Class B standards. Conducted by CVC Testing Technology Co., Ltd.
	Tag-N-Trac SLB1 Smart Sense Label User Manual User manual for the Tag-N-Trac SLB1 Smart Sense Label, a flexible Bluetooth tracking device for real-time asset location and condition monitoring in logistics and industrial applications.
	ST100-SU Series Asset Tracker User Manual User manual for the TAG-N-TRAC ST100-SU Series asset tracker. Learn about its global connectivity via Cat.M1, integrated sensors for movement, light, and geofence, multiple positioning technologies, data encryption, and configuration options for efficient asset management.
	Tag-N-Trac Meraki Integration Guide for Supply Chain Visibility A guide detailing the steps to integrate Tag-N-Trac Bluetooth devices with Cisco Meraki networks to enhance supply chain visibility. This guide covers enabling scanning, configuring webhooks, and viewing devices.