Xvive LV2 Micro Lavalier Microphone
High-performance 3 mm (0.12 in) subminiature microphone
Product Description
The Xvive LV2 is a high-performance 3 mm (0.12 in) subminiature lavalier microphone. It offers a high level of speech intelligibility and is easily hidden in costumes, hair, or buttonholes, making it suitable for film, theater, and broadcast applications. It can even be attached to performers' faces.
Features
- Superior audio clarity
- Natural response across the frequency range
- 3 mm (0.12 in) subminiature lavalier microphone
- Small and easily concealed
- Matte black, sleek, low-profile design
- Microphone capsule with omni-directional pickup pattern
- The plug locks and is compatible with standard TRS interface
Specifications
| Parameter | Value |
|---|---|
| Polar pattern | Omni-directional |
| Sensitivity | -40dB ±3dB |
| Equivalent noise level | 28 dB SPL |
| Impedance | 4.5 kΩ |
| Frequency response | 50 Hz - 20 kHz |
| Battery voltage range | 0.8-5 VDC |
| Battery drain | 17 μA |
| Maximum input level | 117.5 dB SPL |
Microphone Connector and Wiring
The microphone features a mono 3.5mm TRS output. Ensure the connected device provides a regulated + 0.8V to 5V voltage to the "+" conductor.
TRS Wiring Diagram: The 3.5mm TRS plug has three connection points: Ground, "+" Audio output, and bias voltage.
Quick Start Guide
Lavalier Microphone Setup
- Install windscreen and mic clip on the lavalier microphone.
- Use the mic clip to attach the microphone to clothing, as desired.
- Run the mic cable to the transmitter in a way that avoids friction noise, and so that the cable and the wireless transmitter antenna do not cross.
- The Xvive LV2 Lavalier Microphone has an omni-directional pickup pattern. Keep at least 10 inches (approx. 25 cm) away from your mouth or audio source. [distance indicator: 10 inches]
Plug the 3.5mm TRS lavalier microphone plug into your recording device or wireless audio transmitter. [3.5mm TRS plug connecting to a device]
