Botslab W312 Outdoor Pan/Tilt Camera Pro

Packing List

Please check whether the main unit and all accessories are complete upon unpacking.

• Main camera unit x 1
• Wall bracket x 1
• Positioning sticker x 1
• Power adapter x 1
• Waterproof kit x 1
• Screwdriver x 1
• Quick Start Guide x 1
• Cable ties x 2
• Eject pin x 1
• Screw pack for installation x 1
• Warning stickers x 1

Product Appearance

The camera features a pan/tilt design with two antennas. Key components include:

• Wall bracket
• Power interface
• Network interface
• Fill light
• Camera lens
• Microphone
• Indicator light
• Speaker
• Memory card slot (supports up to 256 GB)
• Reset hole

Reset Hole: When the camera is powered on, press the reset hole with the eject pin for 5 seconds. A "Di" sound indicates a successful reset.

Network Configuration Instructions

Download and Install the APP:

Method I: Scan the QR code provided to download and install the Botslab APP.

Method II: Search for and download the Botslab APP from the App Store or Google Play, then install it.

[QR code for Botslab APP download] [App Store logo] [Google Play logo]

Scan to download Botslab APP.

Connect to a Power

1. Connect the camera to the power adapter. After the camera is turned on, the status indicator light will flash green, indicating that the device is in network setup state and awaiting addition.

[Information icon] Note: If the status indicator light is not flashing green, reset the device. Please use the original power adapter.

Description of connection: The camera connects to the power adapter, which plugs into a wall socket. The camera also has a network interface that can connect to Ethernet devices like routers or switches.

[Diagram description: Perform bracket disassembly and assembly by aligning with the icon position.]

Add Camera

Launch the Botslab APP. Tap "Sign up" to create an account, or log in if you already have one.

Method I: From the APP homepage, tap the "+" button to "Add Device", then tap "Camera", and select the "Outdoor Pan/Tilt Camera Pro W312" icon to enter the distribution page and add the camera.

Method II: From the APP homepage, tap the "+" button to "Scan", then use your mobile phone to scan the QR code on the camera to enter the distribution page and add the camera.

[Diagram description: Shows app interface with '+' button and 'Scan' option, and a phone scanning a QR code on the camera.]

Notice:

• Complete sound wave pairing in a quiet environment.
• Network cable connection is supported.
• When using Wi-Fi, ensure the camera is connected to a 2.4GHz/5GHz frequency band Wi-Fi network.

Installation Guide

Insert a Micro SD card (optional): Open the waterproof card cover with a screwdriver, insert the Micro SD card, and log in to the Botslab app for initialization before use.

Wall-mounted Installation:

• The camera supports ceiling and wall-mounted installation. Select an appropriate location, affix the installation sticker, drill holes, install the expansion pipe, and fasten the wall bracket with screws.
• Align the card slot and push the camera upward into the fixed bracket, rotating it until it aligns with the wall bracket positioning marks.

[Diagram description: Shows positioning sticker, plastic expansion tube, and self-tapping screws used for installation.]

Precautions:

• Ensure the camera has been successfully added before wall installation.
• The wall surface must support at least three times the combined weight of the camera and wall bracket.

Install Waterproof Kit (Optional)

1. Before installation, inspect the waterproof kit items and place the waterproof rubber ring on the camera's network interface.

[Diagram description: Shows waterproof kit components and the network interface.]

2. Thread the waterproof kit through the network cable one by one, and connect the network cable to the network interface.

[Diagram description: Shows threading components onto the network cable and connecting to the interface.]

3. Tighten the waterproof kit at the camera's network interface first, and then screw the locking bolt.

[Diagram description: Shows tightening the waterproof kit and screwing the locking bolt.]

After installation, reconnect the camera to the power source. After startup, the camera will automatically connect to the pre-configured network.

Precautions:

• The camera's waterproof kit prevents rainwater from seeping into the network interface. Improper installation may result in equipment damage, which is not covered by warranty.

Notes

1. For better night vision, avoid placing the camera near reflective materials like glass or white walls, as this can cause nearby objects to appear bright and distant objects dark or white.
2. Place the device in an area with good network signal reception. Keep it away from metal objects (supports, doors, windows) or other signal interference sources.
3. Do not place the device near heat sources like electric heaters, ovens, or stoves.
4. The applicable working temperature is -20°C to +60°C. Avoid extreme temperatures.
5. Do not use the product in excessively humid environments that may cause water ingress.

Operating Mode Description

[Information icon] The manufacturer reserves the right to adjust the functional status of the product through firmware upgrades or software adjustments.

IMPORTANT: Personal Information Security

For your safety and your family's, ensure the products are not bound to any unauthorized person. Botslab will take strict measures to protect your information security.

Description of Hazardous Material Contents

This form is prepared in accordance with SJ/T11364.

Key:

• [Circle icon]: Indicates that the hazardous substance is below the requirements set forth by standard GB/T26572.
• [Cross icon]: Indicates that the hazardous substance in at least one homogeneous material exceeds the limit specified in GB/T26572, but satisfies requirements in the List of Exempt Applications of Hazardous Substances.

[Information icon] A small patch of electronic components for special purposes is marked with "X" (e.g., high voltage resistors, ceramic resistors, diodes), where lead content may exceed 0.1%. Screws and data cable cores using alloys for better performance may also exceed 0.1% lead content. These components comply with the exemption clause of the EU RoHS directive. External lead contents comply with environmental protection requirements.

Declaration of Conformity

Botslab, Inc. declares that the radio equipment type W312 (Botslab Outdoor Pan/Tilt Camera Pro) complies with Directive 2014/53/EU and is allowed for use in all EU member states. The full text of the EU declaration of conformity is available at: www.botslab.com.

Operation frequency (Max power):

• 2412 MHz to 2472 MHz: 15.57dBm
• 5180 MHz to 5320 MHz: 13.65dBm
• 5500 MHz to 5700 MHz: 15.23dBm
• 5745 MHz to 5825 MHz: 12.64dBm

RF exposure statement: Maximum Permissible Exposure (MPE) level calculated at a distance of 20 cm from the device and human body. To maintain compliance, use the product with a 20cm distance between the device and human body.

UK Declaration of Conformity

Botslab, Inc. declares that the product complies with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017 (SI 2017 No.1206). The Declaration of Conformity is available on www.botslab.com.

The device is restricted to indoor use when operated in the European Community using frequency 5150MHz-5250MHz to reduce interference potential. This restriction applies to BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE, UK(NI).

The device complies with RF specifications when used at least 20cm from your body.

RF Operating frequency (Max Power):

• 2412 MHz to 2472 MHz: 15.57dBm
• 5180 MHz to 5320 MHz: 13.65dBm
• 5500 MHz to 5700 MHz: 15.23dBm
• 5745 MHz to 5825 MHz: 12.64dBm

The operating temperature of the product is: -20 °C to +60 °C.

[UK icon]

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits provide reasonable protection against harmful interference in residential installations.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. However, interference is not guaranteed to not occur in a particular installation. If interference to radio or television reception occurs (detectable by turning the equipment off and on), the user is encouraged to correct it by:

1. Reorienting or relocating the receiving antenna.
2. Increasing the separation between the equipment and receiver.
3. Connecting the equipment to an outlet on a circuit different from the receiver's.
4. Consulting the dealer or an experienced radio/TV technician.

This equipment must be installed and operated per provided instructions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.