Overview
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control.
Over time, the paint finish may gradually mellow in color; this is part of the natural aging process.
Preparation
Before beginning assembly, read all warnings and safety precautions.
⚠️ Warnings & Cautions
Warnings:
- To reduce the risk of electric shock, only connect the pump to a Ground Fault Circuit Interrupter (GFCI) outlet.
- Do not exceed the voltage shown on the pump.
- Always disconnect the pump from the power source before performing any maintenance or work on the pump, light(s), or any fountain fittings.
- Inspect the pump and power cord for damage before installation and maintenance. If damage is found, the pump should be replaced.
Cautions:
- Use a proper power source as indicated on the pump label. Keep the cords away from high temperatures and heat sources.
- Do not lift the pump by its power cord.
- Keep the fountain out of reach of children and pets.
- Do not let the pump run dry. The pump must be completely submerged for proper operation and cooling.
- Do not pump heated liquids.
- Operate with freshwater only. Avoid heavily chlorinated water and water with high PH levels.
- Do not use harsh chemicals such as bleach to clean the fountain or pump.
Assembly
Note: The water tubing is built into the fountain. Take care when handling the water tube; detaching the water tube from the fountain will damage the fountain and void the product warranty.
Diagram Description: The assembly diagram illustrates the steps for setting up the fountain. It shows a fountain structure with an access panel at the back. Key components include the pump, water tubing, LED light cable, AC adapter, and power cords. A sponge-like polyurethane foam filter is shown, which helps control water flow and prevent splashing; this filter should not be removed.
Assembly Steps:
- From the access panel in the back of the fountain, locate the built-in water tube and light cable. Connect the pump to the water tube and place the pump inside the fountain.
- Extend the LED light cable and connect the AC adapter.
- Align the power cords with the groove in the access panel cover.
- Twist the access panel cover to secure it to the back of the fountain.
- Fill the fountain with enough water to keep the pump fully submerged during operation.
- Plug both power cords into properly grounded GFCI outlets.
Note: When first plugged in, there may be air in the pump. It may take several moments for trapped air to escape, allowing water to flow.
ℹ️ Important Information
Use & Care
- Recommended for outdoor use only. Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
- Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
- Only use water in this fountain; distilled water will help prevent mineral buildup but is not required.
- Periodically change the water to keep the water, fountain and pump clean. Remove scale and buildup regularly.
- DO NOT use harmful additives such as bleach, chlorine, etc.
- DO NOT use anything abrasive to scrub the fountain.
- DO NOT use a pressure washer.
- Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
- Take care when handling the pump; only pick it up by the body of the pump, never the power cord.
- During freezing weather, drain and dry the fountain, disconnect the pump and store indoors; allowing ice to form will damage the fountain.
Troubleshooting
- Ensure that the pump is fully submerged and add water to the basin as needed.
- Check the pump and tubing for obstructions.
- Check the flow control on the body of the pump as it may need to be adjusted to achieve the desired flow rate.
- If the light is not working, ensure the cables are fully connected and the seals are adequately tightened (do not over-tighten).
- If water is not flowing within several moments of the fountain being plugged in, unplug the power supply for a few moments and plug it back in; the pump may have air bubbles inside, which can prevent water from circulating properly.
- Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.
Warranty and Support
Register your warranty at https://tiny.cc/SunnydazeWarranty.
If you have any questions, comments or concerns, feel free to contact Sunnydaze Decor by phone at 833-982-1977, by email: customerservice@sunnydazedecor.com, or via their contact us page at https://tiny.cc/SunnydazeContact.
Purchase Date: ______ / ______ / ______ Order/Customer Reference Number: ____________________
Write down the purchase date and order information to help expedite customer service inquiries.
Any modification to the product or failure to follow recommended care will void the product warranty.
File Info : application/pdf, 2 Pages, 328.48KB
DocumentDocumentReferences
Related Documents
![]() |
Sunnydaze Decor Art Deco Rippling Stream Outdoor Fountain Assembly and Troubleshooting Guide Assembly instructions and troubleshooting tips for the Sunnydaze Decor Art Deco Rippling Stream Outdoor Fountain. Learn how to set up and maintain your fountain. |
![]() |
Sunnydaze Decor Children at the Well Outdoor Water Fountain with LED Lights DW-34035 - Assembly and Care Guide Comprehensive guide for assembling, using, and caring for the Sunnydaze Decor DW-34035 Children at the Well Outdoor Water Fountain with LED Lights. Includes safety warnings, troubleshooting tips, and warranty information. |
![]() |
Sunnydaze Decor Tiered Rock & Log Indoor Tabletop Fountain with LED Lights (DW-35126) Assembly and Care Guide Comprehensive guide for assembling, operating, and maintaining the Sunnydaze Decor Tiered Rock & Log Indoor Tabletop Fountain with LED Lights (DW-35126). Includes safety warnings, care instructions, and troubleshooting tips. |
![]() |
Sunnydaze HDC-260 Tranquil Sands Polystone Indoor Tabletop Fountain User Manual Comprehensive user manual for the Sunnydaze Decor HDC-260 Tranquil Sands Polystone Indoor Tabletop Fountain, including assembly instructions, care and maintenance tips, troubleshooting guide, and important safety information. |
![]() |
Sunnydaze Decor 2-Tier Solar Water Fountain AMP-F921 Assembly and Care Manual Comprehensive guide for assembling, operating, and maintaining the Sunnydaze Decor 2-Tier Solar Water Fountain, model AMP-F921. Includes parts list, step-by-step assembly instructions, solar panel operation modes, battery information, care and maintenance tips, and troubleshooting. |
![]() |
Sunnydaze DECOR Tiered Rock & Log Indoor Tabletop Fountain with LED Lights (10.5-Inch) DW-35126 - Assembly & Care Guide Comprehensive assembly, usage, care, and troubleshooting guide for the Sunnydaze DECOR Tiered Rock & Log Indoor Tabletop Fountain with LED Lights (10.5-Inch, Model DW-35126). Learn how to set up, maintain, and resolve common issues for your tabletop fountain. |
![]() |
Sunnydaze Decor GULL'S COVE OUTDOOR LIGHTHOUSE WATER FOUNTAIN WITH LED LIGHT WNC-345 Assembly and Care Instructions Assembly and care instructions for the Sunnydaze Decor GULL'S COVE OUTDOOR LIGHTHOUSE WATER FOUNTAIN WITH LED LIGHT, model WNC-345. Includes troubleshooting tips and important safety information. |
![]() |
Sunnydaze Decor 3-Tier Cornucopia Outdoor Water Fountain Assembly and Care Guide Comprehensive guide for assembling, caring for, and troubleshooting the Sunnydaze Decor 3-Tier Cornucopia Outdoor Water Fountain (LZH-087). Includes parts list, step-by-step assembly instructions, maintenance tips, and safety information. |