Olafus Smart Floodlight Camera

Safety Information

WARNING: Risk of electrical shock. Disconnect power at the fuse or circuit breaker before installing.

• Verify that the supply voltage is correct. Connect fixture to a 100-240V~50/60Hz power source.
• Properly ground fixture.
• Always follow code standards when installing wire connections. If you are outside of North America, installation and wiring must be performed by a licensed electrician.

CAUTION: Risk of fire. Do not install near combustible or flammable surfaces.

NOTICE: Do not connect this light fixture to a dimmer switch or timer. Floodlight Camera must be installed on a wall and on a UL listed junction box.

WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. DO NOT CONNECT THIS LIGHT FIXTURE TO AN UNGROUNDED ELECTRICAL SYSTEM. ATTACH GROUND FIXTURE WIRE TO EITHER GREEN GROUND SCREW ON MOUNTING PLATE OR THE GROUND WIRE IN THE OUTLET BOX.

Components and Structure

The Olafus Smart Floodlight Camera (Model: 3-LBS60Q) includes the following components:

• Lens
• Sensor Head
• LED Light
• Lamp Base
• Camera Lock Collar
• Micro SD Card Slot
• Reset Button

Parts List

• Machine Screw (QTY: 3)
• Expansion Rubber Plug (QTY: 3)
• Wire Nuts (QTY: 3)
• Long Machine Screw (QTY: 1)
• Machine Screw (QTY: 2)
• EVA Gasket (QTY: 1)
• Silicone Gasket (QTY: 1)
• Mounting Bracket (QTY: 1)
• Machine Screw (QTY: 2)

Specifications

LED Floodlight Camera

• Model: 3-LBS60Q
• Input Voltage: 100-240V~50/60Hz
• Input Current: 0.6A
• Rated Power: 55W
• Luminous Flux: 5500lm
• CCT: 6500K
• CRI: ≥80
• Power Factor: ≥0.9
• Lens: 3MP 2304*1296P
• Field of View: 110° wide viewing angle
• Audio: Two-Way Talk with Audio and advanced noise cancellation.
• Internet Requirements: Recommended minimum upload speed of 2 Mbps per device.
• Connectivity: 802.11 b/g/n Wi-Fi connection
• Storage: Micro SD Card up to 256GB (not included)

Dimensions

• Model: 3-LBS60Q
• Dimensions (LxHxW): 237 x 210 x 127mm / 9.33 x 8.27 x 5.00 in
• Weight: 0.68kg / 1.50lb

Luminaire

• L70B50 lifetime: 30000hours L70B50 @ 25°C
• Beam Angle: 120°
• Operating Temperature: -20-40°C / -4°F-104°F
• Luminaire Location: SUITABLE FOR WET LOCATIONS

Shut Power Off at the Breaker

Turn off power to work area at main circuit breaker or fuse box.

Caution: Please make sure your wall switch and power at main circuit breaker both off.

NOTE: If you don't know where your breaker is or how to turn off power to your floodlight circuit, consult with a licensed electrician.

Preparation

Before beginning assembly of product, make sure all parts are present. Compare parts with parts list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 30-60 minutes.

Recommended to be installed 2.5m (8.2ft) above the ground but not higher than 5m (16.4ft).

Product appearance may vary from image shown.

Tools Required (not included):

• Flathead screwdriver
• Phillips screwdriver
• Eye Protection
• Pliers
• Step Ladder
• Silicone Sealant

Proper Installation Height

The proper installation height to optimize the motion sensor performance is around 2.5m (8.2ft).

Motion Detection Area: Up to 3-8m (9.84-26.25ft)

Installation Steps

FOR WET LOCATION, MAKE SURE TO FILL FULL THE GAP OF EVA GASKET AND MOUNTING SURFACE WITH SEALING COMPOUND OR SILICONE GLUE.

Wiring:

• FROM HOUSE:
• WHITE (NEUTRAL LINE)
• BLACK (LIVE WIRE)
• GREEN (GROUND WIRE)

FROM FIXTURE:

• WHITE (NEUTRAL LINE)
• BLACK (LIVE WIRE)
• GREEN (GROUND WIRE)

Note: The raised part (RA) of the metal plate must be engaged with the recessed part (RE) of the base, otherwise it cannot be installed.

Installation Angle

Once the installation is complete, you can adjust the camera angle by turning the knobs on the floodlight camera.

The optimal angle is 5 degrees; please note that a larger angle will reduce the motion detection distance.

Restore Power at the Breaker

After restoring power, the lights will turn on and your Floodlight Camera will begin speaking to you to let you know it's in setup mode.

FCC Information

FCC ID: 2BH66-3-LBS60Q

FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FAQ

Need Help?

Method 1: Find answers to your FAQs and more information here! Visit our website for assistance with questions about device connectivity issues, app operation problems, and much more. https://olafuslife.com/pages/floodlight-camera-support

Method 2: Scan the QR code to learn more.

Manufacturer Information

Manufacturer/Hersteller: HK JW Illumination Co., Limited

Address/Adresse: Unit 616, 6/f., Kam Teem Industrial Building, 135 Connaught Road West, Sai Wan Hong Kong

Email: support@olafuslife.com

UK Importer: MDH LIGHTING LTD

Address: 69 Aberdeen Avenue, Cambridge CB2 8DL, United Kingdom

EC REP: MDH LIGHTING LTD

Address/Adresse: Suite 302, 292 Strovolos Avenue, 2048 Strovolos Nicosia, Cyprus

Email: service-MDHEU@hotmail.com

Made in China

Website: www.olafus.com