Signature Design by Ashley B770 Series Bed Assembly Instructions
Model Numbers: B770-54, B770-56, B770-57, B770-58, B770-94, B770-96, B770-97
Important Safety Information
General Safety:**
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose. Contact the retailer for missing parts. Do not use substitute parts.
- Periodically check that all connectors (bolts, screws, etc.) are tight.
- Keep instructions for future reference.
- Handle glass or mirrors with extreme care to avoid severe injury if they break. Never handle large pieces of glass or mirrors alone.
- When assembling products with electric cords, ensure the cord is unplugged before assembly and be careful not to twist the cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables (end tables, coffee tables, dining tables) as they are not designed to support a person's weight.
- If assembly requires two or more people, do not attempt alone due to risk of injury.
Liability Note:** Ashley Furniture Industries, LLC disclaims any liability for damages or injuries resulting from failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Appearance Note:** Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Note:** This document also contains safety information in Spanish, French, and Chinese.
Parts List
Hardware is stored at the corner of the headboard and side rail. Parts are located inside the box.
| Part | Description | Quantity | Model Compatibility |
|---|---|---|---|
| A | Headboard Panel | 1 | B770-57, 58 |
| B | Side Post | 1 | B770-57, 58 |
| C | Side Post | 1 | B770-57, 58 |
| D | Bolt (5/16" x 40mm) | 6 | B770-57, 58 |
| E | Allen Wrench (4mm) | 1 | B770-57, 58 / B770-94 |
| F | Footboard Panel | 1 | B770-54, 56 |
| G | Side Rail | 4 | B770-94, 96, 97 |
| H | Support Beam | 3 | B770-94, 96, 97 |
| J | Support Beam / Adjustable Leveler | 3 | B770-94, 96, 97 |
| K | Screw (1/4" x 35mm) | 6 | B770-96, 97 |
Assembly Instructions
Step 1
Attach the Headboard Panel (A) to the Side Posts (B and C). Use six (6) 5/16" x 40mm bolts (D) for this step. Ensure all bolts are started before tightening.
Diagram Description: Shows Part A connecting to Parts B and C using bolts (D). A close-up shows the bolt and the 4mm Allen wrench (E).
Step 2
Attach the Side Rails (G) to the assembled headboard structure and the Footboard Panel (F). The diagram shows two side rails (G) connecting to the side posts and the footboard.
Diagram Description: Shows the bed frame taking shape with side rails (G) attached to the headboard assembly and footboard (F).
Step 3
Attach the Support Beams (H) to the frame. The diagram shows three (3) support beams (H) being attached.
Diagram Description: Shows the placement of three support beams (H) along the inner frame of the bed.
Step 4
Secure the slats (implied) to the Side Rails (G) using six (6) 1/4" x 35mm screws (K). The diagram shows screws (K) and washers being used for this purpose.
Diagram Description: A close-up view illustrates using screws (K) and washers to attach the bed slats to the side rails.
Step 5
Adjust the Adjustable Levelers (J) located on the bottom of the Cross-Slat Support Legs. Ensure there is a 6mm gap between the leveler and the floor for stability.
Diagram Description: Shows a close-up of a bed leg with an adjustable leveler (J) being turned to create a 6mm space from the floor.
Important Note for Moving
Always disassemble the bed prior to moving it to a new location.
Note: This instruction is provided for models B770-54,56,57,58,96,97 and B770-56,58,94.
