Instructions & Support
[PL] Dbając o ekologię, wydrukowaliśmy niniejszą instrukcję tylko w wersji angielskiej. Inne wersje językowe dostępne są na naszej stronie w dziale wsparcie. http://www.fibaro.com/pl/wsparcie-techniczne
[EN] Considering the environment protection we have printed this Quick Manual in English only. Other language versions are available for download from our web site, in Support section. http://www.fibaro.com/en/support
[SE] Med tanke på miljön har vi endast tryckt bruksanvisningen på engelska. Andra språkversioner finns tillgängliga för nedladdning via vår hemsida, under sektionen “support". http://www.fibaro.com/se/support
[FR] Afin de protéger l'environnement, nous avons imprimé le manuel d'utilisation en Anglais seulement. Des versions dans d'autres langues sont disponibles en téléchargement à partir de notre site web, dans la section Support. http://www.fibaro.com/fr/support-technique
[DE] Unserer Umwelt zuliebe haben wir auf ein mehrsprachiges Benutzerhandbuch verzichtet. Das englische Handbuch liegt bei. Alle weiteren Spachen stehen Ihnen im Supportbereich unserer Homepage zum Download zur Verfügung. http://www.fibaro.com/de/unterstutzen
Support
Should you require help configuring Home Center Lite, use tutorials and technical presentations which can be found at www.fibaro.com. Should you need a professional to configure Home Center Lite for you, contact a closest certified Fibaro installer. List of certified Fibaro installers can be found at www.fibaro.com.
Note: Some of the Fibaro System components installation may involve mains voltage connection. It can be dangerous. If you are not sure how to install the devices, use a certified installer's services.
Contents
- AC/DC Adapter
- Network Cable
- Antenna
- Home Center Lite
Installation
-
Connect Antenna
Start by connecting the antenna, turning the mounting screw clockwise.
-
Connect Ethernet Cable
Using the included ethernet cable, connect Home Center Lite's LAN port to a router in order to connect the controller to the internet.
-
Connect Power Adapter
Connect the included power adapter to Home Center Lite and plug it into the main socket.
-
Turn On Home Center Lite
Press the POWER button briefly. Your Home Center Lite will be ready to work in a second.
Your Local Network
Connect your Home Center Lite with a router using the included LAN cable and start the controller. From now on, Home Center Lite will be visible to all devices within your local area network (LAN).
Diagram description: The setup shows Internet connecting to a Modem, which connects to a Router. The Router then connects to a Computer and the Home Center Lite. A Smartphone and Tablet are shown connecting wirelessly to the network.
Remote Access
By default, the Home Center Lite is visible only within your local network. To enable remote access from outside your local network, configure a home.fibaro.com account as described further in this manual.
Create Intelligent Home
Home Center Lite is set to DHCP client mode by default. To find its IP within your local network, download a Fibaro Finder application, in a version appropriate for your operating system, using the links below:
Find Home Center Lite
To determine a Home Center Lite IP, go to www.fibaro.com and download the Fibaro Finder application. Log in to Home Center Lite. Install and run Fibaro Finder. Click REFRESH to see Home Center Lite's IP within your local network.
Login Panel
After successful connection, you will access the HC Lite control panel. Choose your language version, enter your username and password. Defaults are:
- Login: admin
- Password: admin
Create Rooms
When setting up your intelligent home, start by creating rooms in the HCL menu to reflect the layout of your home.
Create Sections
A section is a group of rooms in your home. A section may be a whole floor or a few rooms.
Input field for Section Name, followed by an "Add" button.
Add a Room
Name the room and then choose the section to which you would like to add it.
Input field for Room Name, dropdown for Section, followed by an "Add" button.
Change an Icon
Each room can be represented by a unique icon. You can change the icons in the advanced room's settings.
Add Devices
After creating the rooms, you can start adding devices.
Click "Devices" in the main menu screen. Find and click the ADD button to start adding devices (learning mode) on the left-hand menu.
The menu will count down the time (30 seconds by default) for you to add a new device to the Z-Wave network (inclusion).
Note that the device needs to be located within direct range of the Home Center Lite during the inclusion process.
Please refer to each device's manual for further information on how to include it into the Z-Wave network.
NOTE: Danger of electrocution! If you are not sure how to connect a device to the wires, please contact a qualified installer.
FIBARO System Devices
Wall Plug
The FIBARO Wall Plug with power metering feature is an intelligent, ultimate plug & play, extremely compact, remotely controlled outlet adapter. This highly functional wall plug can be applied wherever you want to control electrical devices (max permissible load 2.5kW), while monitoring power consumption in a convenient and maintenance-free way.
Icons representing: [projector icon], [coffee cup icon], [television icon], [iron icon], [lamp icon].
Door/Window Sensor
This is a compact sensor used for monitoring the status of doors, windows, garage gates, and such. The sensor is available in seven color versions to match your interior design. The Door/Window Sensor is best used to control lights and as a component of access control and security systems.
Instruction: Perform [3x clicks].
Icons representing: [door icon], [window icon], [roof window icon], [garage door icon], [gate icon].
Smoke Sensor
The sensor immediately detects smoke or high temperature and warns about discovered threats with sound and LED illumination. The sensor can be battery operated or hard wired (12 or 24 VDC) and can be integrated with almost any wired alarm system. A built-in "black-box" allows the device to report and record smoke and temperature readouts. Additional device features include automatic, wireless software updates, and Z-Wave network range detection.
Instruction: Perform [3x clicks].
Icons representing: [RGB LED icon], [temperature sensor icon], [sensitiveness icon], [black box icon].
Motion Sensor
The Motion Sensor is a miniature, advanced multi-sensor detecting motion, temperature level, light intensity, changes in device position, and earthquakes. The sensor design was inspired by the cat's eye, thus it has a wide angle of view, high detection range, and is ultra-sensitive. Additional device features include automatic, wireless software updates, and Z-Wave network range detection.
Icons representing: [light sensor icon], [motion sensor icon], [temperature sensor icon], [accelerometer icon].
Flood Sensor
The Flood Sensor is a universal, Z-Wave compatible, water and temperature sensor. It can be battery or VDC powered (12/24 VDC). The device has a built-in LED indicator and acoustic alarm, and is also equipped with dual tamper protection, which detects any movement or relocation. It has a built-in Z-Wave network range tester and can update automatically.
Icons representing: [flood sensor icon], [tilt sensor icon], [temperature sensor icon], [telescopic probe icon].
Power Monitoring
Monitor the current energy consumption and the power consumption history within the configuration interface of HCL. Detailed statistics presented as extremely intuitive, clear charts, give you the opportunity to control and effectively plan energy consumption costs.
Visualizations include: a dial showing current usage (7.3kWh), a pie chart showing consumption breakdown, bar charts illustrating usage over time, and a "TOP 5" list of devices/rooms by consumption.
Recovery
Recovery is the panel dedicated to retrieving the controller's system or re-installing it in case of any problems. In case of a system breakdown, you can fix it by getting back to the last stable version of the system, while retaining configuration settings. You can also choose to get back to factory settings. When you are not able to connect to the internet, choose the repair from file option, and the system will be re-installed without deleting the previously saved settings.
Options:
- Repair system: Repair your system automatically to the latest software version.
- Repair from file: Repair system from a local file.
- Recover system: Recover your system to the latest software version. All user data will be erased.
System Info:
Serial number: HCL-000072
IP Address: 192.168.100.230
Status: online
LED Diodes
LED diodes located on the front panel of the Home Center Lite enclosure have the following purpose:
- Power: Glows when the power supply is on. [Power icon]
- Z-Wave: Glows when the HCL is connected to the local network. [Z-Wave icon]
- Ethernet: Glows when the HCL is connected to the internet. [Ethernet icon]
- Lan Network: Blinks when the HCL sends commands to the Z-Wave network devices. [LAN Network icon]
- Learn mode: Glows when a software update is available. [Learn mode icon]
