Inrico

Notes Before Using

Please read the following content carefully. It is very important for radio users to gain general knowledge and risks.

• Do not use the device or charge the battery in any hazardous areas such as gas, dust, steam, etc.
• Please turn off the device while refueling or parking at the gas station.
• Do not disassemble your radio.
• Avoid prolonged time in the sun or placing it near heating appliances.
• Avoid excessive exposure to extremely dusty, damp, and splashing places, or leave it on unstable surfaces.
• Repairs should be performed by professional technicians; do not disassemble by yourself.

Disclaimer

Inrico reserves the right to modify product design and specifications. Inrico assumes no responsibility in the event of printing errors. All specifications are subject to change without notice.

Unpacking and Device Checking

Please unpack and take out the device and all accessories carefully, and ensure all lists have been gotten before discarding the cardboard box. If any items are lost or damaged in transit, please contact with our distributors.

Accessories

Handling Precautions

• Do not overcharge the battery: Please stop charging if it cannot be fully charged within the required time. The battery may overheat, smoke, burst, or suddenly catch fire due to an abnormal charging process. When fully charged or not charged, please disconnect the charger and unplug it from the power outlet.
• Do not discard battery in a microwave or high-pressure container: The battery may overheat, smoke, burst, or suddenly catch fire.
• Do not expose damaged battery near any fire: If the battery is broken, leaking, or has an abnormal odor, please remove it from flammable areas immediately. The fluid in the battery is flammable, which may cause smoke and fire.
• Do not use abnormal battery: If the battery has an odd smell, is discolored, deformed, etc., please stop charging or disassemble it from the device immediately.
• Please use authorized power adaptor: To comply with warranty terms and avoid damages, charge the battery using a specified charger for best performance.

Battery Care

Fully Charge Battery Before Initial Use

• Do preserve battery life by switching off the device and removing the batteries when it's not being used and is not expected to be used for extended periods of time.
• Do practice proper battery storage by keeping batteries in a cool, dry place at normal room temperature.

Properly Store Batteries

• Remove the battery from the device.
• Charge and discharge the battery to 40%-65% if it will not be used for 10 days or more. This can greatly extend the battery life.
• The battery should drop below 65% when it is idle for more than 10 days to prevent it from swelling.
• Store the battery in a cool and dry environment that's less than 25°C.

Features of Lithium Battery

• Battery capacity will reduce after multiple charging cycles.
• The battery capacity drops gradually even without being used.
• Longer charging time is required in shady places.
• Charging and storing lithium batteries in warm conditions will shorten their lifespan. Please do not leave them inside a vehicle or near a heater.
• If the battery working time has reduced significantly, please replace the battery immediately to avoid fluid leakage.

Clean and Maintenance

• Before cleaning and maintaining the device, please stop running, turn off the device, and disconnect all connections with other equipment.
• When you do not use the radio, please cover the accessories connector.
• When cleaning dust, please use a soft brush and neutral detergent (no strong corrosive chemicals) to wipe it.
• Please keep the equipment and accessories dry.
• Please do not use a microwave oven or hair dryer or other heating devices to dry them.

Product Overview

The Inrico BC680 4G LTE Smart Terminal features a robust design with various indicators and controls.

Key components visible in the diagrams include:

• Top View: Status Indicators (Red&Blue Flashing, general Status Indicator), Infrared Light, Light Sensor, Sub Microphone (Sub MIC), Main Microphone (Main MIC), Video Record Button, and Main Zoom Lens.
• Front View: The device body with the Inrico logo, a display area, an "OK" button, a rotating "Knob" for adjustments, Function button "F1", and the "Power Button".
• Side View: Dedicated "SOS" button, "PTT" (Push-to-Talk) button, Function button "F2", and Function button "F3".

Basic Functions

1. Power On/Off

   • Power On: Long press the power button for 3 seconds to start the program.
   • Power Off: Long press the power button for 3 seconds. If the device is charging, indicators will be red and display the current battery level.

2. User Log-in

   After successful user login, the user ID will be broadcast.

3. Initiate a Call

   • Press the PTT button and start to talk.
   • The LED light is solid red during transmitting.
   • The LED light is solid green during receiving.
   • The green light is on when the device is idle.
   • Once the call time exceeds 60 seconds, the call will automatically end.

4. Night Vision Mode

   Night mode automatically turns on when the camera detects a low-light environment.

Status Indicators

Simple Troubleshooting

Specification

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SAR Information

SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.

Before a new model device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each device are performed in positions and locations (worn on the body) as required by the FCC.

For face-up/body back, 5mm was used for test; this equipment should be installed and operated with a minimum distance of 5mm from body/face.

For body-worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 0mm from the body.

Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

RF Exposure Compliance and Control Guidelines and Operating Instructions: To control your exposure and ensure compliance with the general/uncontrolled environment exposure limits, always adhere to the following procedures.

Max. SAR Level(s) Reported (W/kg): 1g Body SAR: 1.17W/kg; 1g Face SAR: 1.17W/kg. Limit (W/kg): 1.6W/kg.