Inrico T310R PoC Radio User Manual

Unpacking and Device Checking

Please unpack and take out the device and all accessories carefully, and ensure all lists have been gotten before discarding the cardboard box. If any items are lost or damaged in transit, please contact with our distributors.

Accessories

Handling Precautions

Please read the following notice carefully. It is very important for device users to gain general knowledge and risks.

• Do not overcharge the battery: Please stop charging if it can't be fully charged within the required time. The battery may overheat, smoke, burst, or suddenly catch fire due to an abnormal charging process. When fully charged or not charged, please disconnect the charger and unplug it from the power outlet.
• Do not discard battery in a microwave or high-pressure container: The battery may overheat, smoke, burst, or suddenly catch fire.
• Do not expose damaged battery near any fire: If the battery is broken, leaking, or has an abnormal odor, please remove it from flammable areas immediately. The fluid in the battery is flammable, which may cause smoke and fire.
• Do not use abnormal battery: If the battery has an odd smell, is discolored, deformed, etc., please stop charging or disassemble it from the device immediately.
• Please use authorized power adapter: To comply with warranty terms and avoid damages, charge the battery using a specified charger for best performance.

Battery Care

Fully Charge Battery Before Initial Use

• Do preserve battery life by switching off the device and removing the batteries when it's not being used, and is not expected to be used for extended periods of time.
• Do practice proper battery storage by keeping batteries in a cool, dry place at normal room temperature.

Properly Store Batteries

• Remove the battery from the device.
• Charge and discharge the battery to 40%-65% if it will not be used for 10 days or more. This can greatly extend the battery life.
• The battery should drop below 65% when it is idle for more than 10 days to prevent it from swelling.
• Store the battery in a cool and dry environment that's less than 25°C.

Features of Lithium Battery

• Battery capacity will reduce after multiple charging cycles.
• The battery capacity drops gradually even without being used.
• Longer charging time is required in shady places.
• Charging and storing Lithium battery in warm conditions will shorten its lifespan. Please do not leave them inside the vehicle or near the heater.
• If the battery working time has reduced significantly, please replace the battery immediately in avoidance of fluid leakage.

Clean and Maintenance

• Before cleaning and maintaining the device, please stop running, turn off the device, and disconnect all connections with other equipment.
• When you do not use the radio, please cover the accessories connector.
• When cleaning the dust, please use a soft brush and neutral detergent (no strong corrosive chemicals) to wipe it.
• Please keep the equipment and accessories dry. Please do not use the microwave oven or hair dryer or other heating devices to dry them.

Product Overview

The Inrico T310R is a PoC (Push-to-Talk over Cellular) radio designed for reliable communication. It features a durable design and user-friendly interface.

Key Features:

• PTT button for instant communication.
• Volume control buttons.
• Navigation keys for menu interaction.
• SOS button for emergency situations.
• Camera for optional photo capture.
• NFC functionality for patrol mode.

The device has a 2.4-inch screen, a 3400 mAh battery, and supports various frequency bands.

Function Sheet

Accessories Installation

1. Insert SIM card: Align the SIM card with the slot and insert it.
2. Insert Micro SD card: Align the Micro SD card with the slot and insert it.
3. Attaching the Battery Cover: Push the battery cover until it clicks into place. Push the battery cover down.
4. Close the Battery Cover: Push up into the battery cover socket. Lock the battery batch. Open the battery cover: Flip down the battery button and open the battery cover.

Basic Functions

1. Power on/Power off: Power On: Long press the power button for 4 seconds and the program will start. Power Off: Long press the power button for 4 seconds.
2. Screen unlock: Short press the power button to lock the screen. Press the back button with '*' to unlock.
3. Initiate a Call: Press PTT button and start to talk. The LED light is blinking green after loading the APP. The LED light is solid red during transmitting. The LED light is solid green during receiving. If occupied when another person is talking, the PTT button is invalid.
4. Voice Playback: Short press the F2 button to playback cyclically the latest 10 voice records. Press the PTT button, return automatically to the last voice record.

Status Indicators

Simple Troubleshooting

Specification

RF Exposure Compliance and Control Guidelines

Guidelines:

• Do not remove the RF Exposure Label from the device.
• User awareness instructions should accompany the device when transferred to other users.
• Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

• Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance).
• Hold the radio in a vertical position in front of the face with the microphone (and the other parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important because the antenna should be kept away from eyes.

SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.

For face-up, 10mm was used for test; this equipment should be installed and operated with a minimum distance of 10mm. For body-worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 5mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

To control your exposure and ensure compliance with the general/uncontrolled environment exposure limits, always adhere to the following procedures.

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Disclaimer

This guide is for reference only and the information in this document is carefully examined and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, the supplier reserves the right to make changes to any products herein to improve readability, function, or design. The supplier does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others.