Cisco Codec Pro Installation Guide

Introduction

This document provides a comprehensive guide for the installation and setup of the Cisco Codec Pro. It covers unboxing, connections, power, software configuration, and detailed port descriptions. The Cisco Codec Pro is a video conferencing device designed for professional collaboration environments.

Box Contents

The box typically contains the Cisco Codec Pro unit. Optional accessories may include antennas (for radio versions), a power cable, and rack ears.

Cisco Codec Pro unit
Antennas (for radio version)
Power cable
Rack ears (Optional)

Power Cord Information

The Cisco Codec Pro requires a power cable with specific ratings: 10A, 250V, with an EL 701B (IEC60320/C13) power connector. If an optional power cord is not supplied, the customer is responsible for selecting a compatible cord to avoid electrical safety hazards. For orders to Argentina, Brazil, and Japan, a specific compatible power cord must be ordered with the system.

Camera Options

The Cisco Codec Pro supports various camera options, including:

Cisco TelePresence SpeakerTrack 60
Cisco Quad Camera
Cisco TelePresence Precision 60 Camera
Cisco PTZ 12 Camera
Cisco PTZ 4K Camera

Refer to specific installation guides for each camera type.

Installation and Setup

Mounting the Codec in a Rack (Optional)

The codec can be mounted in a rack using optional rack ears. The rack ears can be oriented so the connector panel faces either forward or backward.

Connecting Antennas (for radio version only)

For radio versions, connect the antennas to the designated connectors on the codec.

Connecting Cables

Connect the necessary codec cables, including power, network (Ethernet or Wi-Fi), and any camera control or audio/video cables as per the diagrams provided. For the SpeakerTrack 60, connect its power cable and adapter (12VDC, minimum 5A).

Powering On and Software Setup

Turn on the screen and then the codec. The system powers up automatically. Follow the on-screen instructions on the Welcome screen to complete the initial setup. It is recommended to upgrade the software on the Codec Pro before use. Further details can be found in the Administrator Guide, available at: https://www.cisco.com/go/roomkit-docs.

Ventilation Requirements

Ensure proper ventilation for the Cisco Codec Pro. Do not block any ventilation openings. Maintain a minimum of 10 cm (4 inches) of free space in front and rear of the unit. A minimum of 4.5 cm (1.7 inches) of free space is required below the codec and adjacent rack-mounted components.

Port and Connector Descriptions

The Cisco Codec Pro features a variety of ports for connectivity:

A. Antenna connector
B. 6x Line outputs (Euroblock, 3.5 mm)
C. 8x Microphone/Line inputs (Euroblock, 3.5 mm)
D. GPIO port (Euroblock, 3.5 mm)
E. COM port (Euroblock, 3.5 mm)
F. Antenna connector
G. Ground (Protective earth)
H. Main power input (1.3-0.6A, 100-240Vac, 50/60 Hz)
I. 2x HDMI outputs with audio and video (Connector 1-2), 4Kp60
J. HDMI output with audio and video (Connector 3), 4Kp30
K. 2x Camera inputs (HDMI, Connector 1-2), 1080p60
L. 3x HDMI inputs with audio and video (Connector 3-5), 4Kp30
M. Camera input (3G-SDI/HD-SDI, Connector 6), 1080p60, HD-BNC, 75Ω
N. 2x USB 2.0, type A
O. USB 2.0, type B
P. Maintenance (micro USB)
Q. Factory reset
R. Network (Ethernet) 1Gb
S. 2x Camera control (Ethernet)
T. Ethernet PoE - Internal network port for PoE device
U. Touch panel (user interface, Ethernet PoE)
V. Status LED
W. Power On/Off

The Cisco TelePresence SpeakerTrack 60 also has specific ports:

A. Video (3G-SDI), 1080p60
B. Not in use
C. HDMI output, 1080p60
D. Factory reset
E. Power input (12 Vdc, 2.5A)
F. Camera control (Ethernet)
G. Power to camera right
H. Power to camera left
I. Power input (12 Vdc, 6.5A)
J. Camera control, camera right (Ethernet)
K. Camera control, camera left (Ethernet)
L. Network, from codec (Ethernet)
M. Maintenance (micro USB)
N. Euroblock, 3.5 mm (not in use)
O. Microphone, internal cables from the microphone panel (Euroblock, 3.5 mm)
P. Cinch connector (not in use)
Q. Factory reset, *pin hole at the bottom of the unit

Additional Resources

Visit the following websites for more information:

Refer to the product data sheet for details on ordering accessories, cables, and spare parts.

Legal and Trademark Information

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco Systems, Inc. and its affiliates. Third-party trademarks are the property of their respective owners.

	Cisco Camera Guide: Quad, Precision 60, SpeakerTrack 60, PTZ-12, PTZ 4K A comprehensive guide to installing and using Cisco's advanced video conferencing cameras, including the Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K. Learn about physical interfaces, codec compatibility, and setup.
	Cisco Webex Room Kit Plus Installation Guide This guide provides comprehensive instructions for installing the Cisco Webex Room Kit Plus, including the Quad Camera and Codec Plus. It covers unboxing, mounting, cable connections, and initial software setup for video conferencing.
	Cisco Room Kit EQ PTZ 4K Installation Guide A comprehensive guide for installing the Cisco Room Kit EQ PTZ 4K video conferencing system, covering component identification, mounting options, cable connections, and initial software setup.
	Cisco Room Kit Pro PTZ 4K Installation Guide This document provides a comprehensive installation guide for the Cisco Room Kit Pro PTZ 4K, covering box contents, hardware setup, and software configuration.
	Cisco Multi Camera Setup: Room Preparation Guidelines for Cross-view and Extended Speaker View Comprehensive guidelines for setting up Cisco's Cross-view and Extended Speaker View features, covering room layout, camera placement, cabling, and software configuration for optimal hybrid meeting experiences.
	Cisco Room Kit Plus PTZ 4K Installation Guide This guide provides essential information for installing the Cisco Room Kit Plus PTZ 4K, covering box contents, hardware connections, safety guidelines, ventilation, and software setup for a seamless video conferencing experience.
	Cisco Camera Guide: Quad, Precision 60, SpeakerTrack 60, PTZ-12, PTZ 4K Comprehensive guide to Cisco's Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K cameras. Covers installation, physical interfaces, codec connectivity, and factory reset procedures for enhanced video conferencing.
	Cisco Room Kit EQ Room Vision PTZ Installation Guide This guide provides comprehensive instructions for installing the Cisco Room Kit EQ with Room Vision PTZ, covering box contents, optional accessories, features, warnings, and connection procedures. It includes details on LED indicators, connector panels, and power specifications, along with room preparation guidelines and software setup.