Cisco Room Kit Pro PTZ 4K

Installation Guide

Box Contents

The box contains the following items:

Cisco PTZ 4K camera
Cisco Codec Pro
Cisco Room Navigator

Included Components

Power adapter and cable for PTZ 4K camera
Ethernet cable for Room Navigator
Antennas for Codec Pro
Power cable for Codec Pro
Rack ears for Codec Pro (optional)

Note on Power Cable: For orders to be delivered to Argentina, Brazil, and Japan, an appropriate power cord must be ordered with the system. The power cable has a rating of 10A, 250V and uses an EL 701B (IEC 60320/C13) power connector.

Optional Accessories

The following items can be ordered separately:

Wall mounting bracket for the PTZ 4K camera
Ceiling mount for the PTZ 4K camera
Cisco table or ceiling microphone

Cables: Cisco recommends using certified HDMI cables (High Speed HDMI 1.4b for cameras and presentation sources, Premium High Speed HDMI for screens) and Ethernet cables for camera control and network connectivity (Wi-Fi can be used instead of Ethernet for network connection).

Safety and Mounting Hardware

The wall and mounting hardware must be able to safely support the product. Installation must be performed by qualified personnel in accordance with state and local building regulations.

Ventilation Requirements

Ensure that ventilation openings on the codec are not blocked. Maintain the following clearances:

Minimum 10cm (4 inches) of free space in front and rear of the unit.
Minimum 4.5cm (1.7 inches) of free space below the codec and any adjacent rack-mounted component.

Mounting the Codec in a Rack (Optional)

Rack ears can be mounted so the connector panel faces forward or backward.

Camera Power and Control

Always use the power supplies specified for the PTZ 4K camera. Use an Ethernet cable for camera control; do not use a VISCA cable as it can cause severe damage to the camera.

The following table indicates compatible and incompatible mounting and connection methods:

Part Number	Mounting Compatibility	Connection Compatibility
74-126890-01	✔️	✔️
74-126086-01	✔️	✔️
74-126890-02, 03, 04...	✔️	✔️
74-126086-02, 03, 04...	✔️	✔️

Connecting Antennas

Connect the antennas to the codec.

Connecting Cables

Connect the codec cables: Connect the necessary cables to the Codec Pro, including power, Ethernet, and any audio/video connections.
Connect the PTZ 4K camera cables: Connect the camera to the Codec Pro using the appropriate cables (HDMI, Ethernet for control). Ensure the power supply for the camera is connected correctly.

Turning On the Codec

Connect the power cable to the codec and plug it into an accessible power outlet.
The system powers up automatically. If it does not, check the power switch on the codec.
When the Welcome screen appears, follow the on-screen instructions to complete the setup.
Software Upgrade Recommendation: It is recommended to upgrade the software on your Codec Pro before use. Refer to the Administrator Guide for the codec for detailed instructions.

Network Connectivity: Use Ethernet LAN or Wi-Fi. Devices with 'NR' in their product identifier do not support Wi-Fi.

Camera Orientation: If the PTZ 4K is mounted upside down, configure the codec to flip the camera image. Consult the Administrator Guide for the codec for this setting.

Completing Software Setup

Follow the on-screen prompts on the Welcome screen to complete the software setup. Ensure the screen is powered on and configured for HDMI input if necessary.

Cisco Codec Pro Ports and Connectors

The Cisco Codec Pro features various ports and connectors for different functionalities:

A. Antenna connector: For antenna connection.
B. 6x Line output (Euroblock, 3.5 mm): For audio line output.
C. 8 x Microphone/Line input (Euroblock, 3.5 mm): For microphone or line input.
D. GPIO port (Euroblock, 3.5 mm): General Purpose Input/Output port.
E. COM port (Euroblock, 3.5 mm): For serial communication.
F. Antenna connector: Another antenna connection.
G. Ground (Protective earth): For grounding the unit.
H. Main power input (1.3-0.6A, 100-240Vac, 50/60 Hz): Connection for the main power supply.
I. 2 x HDMI output with audio and video (Connector 1-2), 4Kp60: For video and audio output.
J. HDMI output with audio and video (Connector 3), 4Kp30: For video and audio output.
K. 2 x Camera input (HDMI, Connector 1-2), 1080p60: For connecting cameras.
L. 3 × HDMI input with audio and video (Connector 3-5), 4Kp30: For video and audio input.
M. Camera input (3G-SDI/HD-SDI, Connector 6), 1080p60, HD-BNC, 75Ω: For connecting cameras via SDI.
N. 2 x USB 2.0, type A: For connecting USB devices.
O. USB 2.0, type B: For connecting USB devices.
P. Maintenance (micro USB): For maintenance purposes.
Q. Factory reset: Button to reset the device to factory settings.
R. Network (Ethernet) 1Gb: For network connection.
S. 2x Camera control (Ethernet): For camera control via Ethernet.
T. Ethernet PoE - Internal network port for PoE device: For connecting PoE-enabled devices.
U. Touch panel (user interface, Ethernet PoE): For connecting the touch panel.
V. Status LED: Indicates the operational status of the device.
W. Power On/Off: Button to turn the device on or off.

Cisco PTZ 4K Camera Ports and Connectors

The Cisco PTZ 4K camera has the following ports and connectors:

A. Kensington lock: Security slot for physical security.
B. Factory reset: Button to reset the camera to factory settings.
C. System select (Position: 6): System configuration switch.
D. HDMI output, 1080p60: For video output.
E. Camera control (Ethernet): For controlling the camera via Ethernet.
F. Power input (12 Vdc, 2.5A): Connection for the camera's power adapter.
G. Earth terminal: For grounding the camera.
H. Tripod screw hole²: For mounting the camera on a tripod.
I. Screw holes for ceiling mounting: For mounting the camera on a ceiling.

Note on VISCA: VISCA is enabled on the HDMI output.

Note on Tripod Mounting: Do not use the tripod screw hole for ceiling installation.

Further Information

For more information on ordering accessories, cables, and spare parts, refer to the product data sheet.

Visit the following websites for more information about your device:

	Cisco Room Kit Plus PTZ 4K Installation Guide This guide provides essential information for installing the Cisco Room Kit Plus PTZ 4K, covering box contents, hardware connections, safety guidelines, ventilation, and software setup for a seamless video conferencing experience.
	Cisco Room Kit EQ PTZ 4K Installation Guide A comprehensive guide for installing the Cisco Room Kit EQ PTZ 4K video conferencing system, covering component identification, mounting options, cable connections, and initial software setup.
	Cisco Codec Pro Installation Guide A comprehensive guide for installing and setting up the Cisco Codec Pro video conferencing system, detailing box contents, power requirements, camera options, connection procedures, software setup, ventilation, and port descriptions.
	Cisco Multi Camera Setup: Room Preparation Guidelines for Cross-view and Extended Speaker View Comprehensive guidelines for setting up Cisco's Cross-view and Extended Speaker View features, covering room layout, camera placement, cabling, and software configuration for optimal hybrid meeting experiences.
	Cisco Room Kit EQ Room Vision PTZ Installation Guide This guide provides comprehensive instructions for installing the Cisco Room Kit EQ with Room Vision PTZ, covering box contents, optional accessories, features, warnings, and connection procedures. It includes details on LED indicators, connector panels, and power specifications, along with room preparation guidelines and software setup.
	Cisco Video Endpoints for Simple and Inclusive Collaborative Experiences Explore how Cisco video endpoints enhance collaboration with simple, inclusive, and intelligent features, optimizing workspaces for hybrid work environments. Discover solutions for various room sizes and use cases, powered by AI and RoomOS.
	Cisco Webex Room Kit Plus PTZ 4K Integrator Bundle Datasheet Comprehensive datasheet detailing the Cisco Webex Room Kit Plus PTZ 4K Integrator Bundle, covering its advanced features, technical specifications, product overview, sustainability information, and ordering details for enhanced video collaboration.
	Cisco Webex Room Kit Plus Installation Guide This guide provides comprehensive instructions for installing the Cisco Webex Room Kit Plus, including the Quad Camera and Codec Plus. It covers unboxing, mounting, cable connections, and initial software setup for video conferencing.