Musical Boxing Pro

Introduction

Boxing is a combat sport where two opponents of equal size and ability fight each other using gloves. It is used to train the speed and strength of players in both amateur and professional sports. In boxing, speed is more important than strength due to the short gap in matches. This product uses electronically controlled light guidance, responding to sound signals, to train people's ability to hit the target point accurately, thereby improving overall coordination and sensitivity.

Operation

On/Off: Long press the On/Off button to power the device on and off.

Bluetooth: Press the On/Off button to power Bluetooth on or off.

Speed: Press to adjust the speed, displaying H01-H09. The display flashes faster accordingly. The default speed level is H01. It also features a boxing counter, displaying C00-C99.

Mode: Press to adjust the mode, displaying P01-P09. Each mode has a different speed and difficulty level.

Assembly

Option 1: Peel off the transparent film behind the black adhesive tape and paste it to the back of the Boxing Pro (Figure 1). Tear off the transparent film on the other side of the black adhesive tape, then paste the whole Boxing Pro onto the wall or door (Figure 2).

Option 2: Paste the two velcros together and peel off the covers from both sides. Paste one side to the back of the Musical Boxing Pro and the other side to the wall.

Technical Data

• Input: DC 5V
• Power: 5W
• Working Voltage: 3.7V

Charging (If Battery preset)

Use a mobile phone charger (5V/1A-2A) to charge via the attached cable. Mounting the Boxing Pro should be considered close to a wall socket.

The device uses a USB Type C connector for charging.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.