Musical Boxing Pro

Introduction

Boxing is a combat sport where two opponents fight using their fists. It is used for training speed and strength. The Musical Boxing Pro uses electronically controlled light guidance to train users to respond to sound signals and accurately hit targets, thereby improving overall coordination and sensitivity.

Technical Data

Input: DC 5V

Power: 5W

Working Voltage: 3.7V

Charging (If Battery preset)

Use a mobile phone charger (5V/1A-2A) to charge via the attached cable. Ensure the Musical Boxing Pro is positioned near a wall socket.

[USB Type C charging port]

Operation

• On/Off: Long press the power button to turn the device on or off.
• Bluetooth: Press the On/Off button to power on or off Bluetooth.
• Speed/Mode: Simultaneously press and hold the speed/mode buttons for 3 seconds. Display shows F00 to turn off the impact sound effect, and F01 to turn on the impact sound effect.
• Speed: Cycle through speed adjustments. The display window shows H01-H9, indicating faster light changes. The default startup is H01. Press and hold to decrease volume.
• Mode: Adjusts the mode. Displays P01-P9, indicating 12 different program selections. Press and hold to increase volume.

Assembly

Option 1:

1. Peel off the transparent film behind the black adhesive tape and paste it to the back of the Boxing Pro.
2. Tear off the transparent film on the other side of the black adhesive tape and paste the entire Boxing Pro onto a wall or door.

Option 2:

1. Paste the two velcro strips together.
2. Peel off the covers from both sides of the velcro.
3. Paste one side to the back of the Musical Boxing Pro and the other side to the wall.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.