User Guide for neolab convergence models including: R1, R1 Neo Smartpen for Android iPhone and Laptop, Neo Smartpen for Android iPhone and Laptop, Smartpen for Android iPhone and Laptop, Android iPhone and Laptop, iPhone and Laptop, Laptop
NEOLAB CONVERGENCE NWP-F45 SMARTPEN 2AALG-NWP-F45 2AALGNWPF45 nwp f45
NEO SMARTPEN R1
Quick Guide
What's in the box
Part Name
Stopper
LED (status indicator) Charging port
Neo Smartpen R1
Quick Guide
SMARTPEN
Get started
Charging Cable
Quick Guide
Charge the pen
Ensure the product is fully charged before use.
Optical sensor
Power button
Pen cap Pen clip Pen tip removal groove
Download Neo Studio 2 App & Pen connection
Download the app
You can download the Neo Studio 2 app from the Google Play Store and the App Store.
/FP4UVEJP
Tutn the pen on/off
When the pen is fully charged, briefly press the Power button. The pen will be turned on, as indicated by the LED. To turn the pen off, press and hold the Power button for 2 seconds or longer. The LED will flash in different colors before the pen is turned off. The pen will be automatically turned off after 20 minutes of inactivity. (You can adjust the automatic power off time in the NEO STUDIO app.) In case the pen is not turning on, is not charged or does not work, press and hold the power button for 10 seconds to reset the pen.
How to use
The location of the optical sensor greatly affects recognition accuracy. Please note that your handwriting may not be recognized if you hold or use the pen at an incorrect angle or in the wrong direction.
How to hold the pen correctly Make sure the pen tip is facing upwards when you hold the pen.
Allowable Recognition Angle Product's acceptable recognition angle is -20~ + 40. (90 vertical standard) You can freely take notes with just the pen without connecting to the app. Once connected to the app, the data can be automatically transmitted.
How to replace the pen tip easily When you insert the pen tip horizontally into the pen tip removal groove located on the upper part of the pen clip and pull it, it will come off easily.
App settings
Enable the device's "Bluetooth" and "GPS(location) before opening the app."
Connect the app to the pen
Open the app and allow the necessary permissions. Follow the on-screen instructions to connect the app to the pen. When the app is connected to the pen, the pen's LED will turn green.
LED indicator information
4UBUVT 1PXFSPO
1PXFSPGG
$IBSHJOH
'VMMZDIBSHFE
-PXCBUUFSZ $POOFDUJOHUPUIFBQQ
-PXTUPSBHF 6QEBUJOHGJSNXBSF
'JSNXBSFVQEBUFGBJMFE
-&%DPMPS *MMVNJOBUJOH
5IFOMJHIUPGG
#MJOLJOH
*MMVNJOBUJOHBOEUIFOUVSOFEPGG
#MJOLJOH *MMVNJOBUJOH #MJOLJOH #MJOLJOH
#MJOLJOH
0QUJDBMTFOTPSPS VTBHFFOWJSPONFOUDIFDL
*MMVNJOBUJOH
Precautions
This product has a built-in optical sensor. The recognition may not work correctly in direct sunlight, outdoors, or under infrared light. Ensure the optical sensor is not blocked. Strong impact on the pen tip may cause damage to the pressure sensor. Leaving the product in places with a strong magnetic field, high temperature, or under direct sunlight for a long period of time may cause severe damage to the product. When not in use, close the pen cap. Lightly remove any dust or dirt from the input sensor with a cotton swab. Disassembling and reassembling the product will lead to product malfunction. In such cases, the warranty period will be void. You must use the recommended pen tip that is compatible with the product. NeoLab Convergence is not responsible for any malfunction caused by noncompliance with this instruction. Parental supervision is required when children use this product.
1SPEVDUTQFDJGJDBUJPOT
Product name Model name Connectivity
Battery Storage Rated input Usage time
SMARTPEN NWP-F45 Bluetooth 5.0(BLE) / 2402MHz~2480MHz Rechargeable Li-polymer 180mAh / 3.7Vdc 2MB memory 5Vdc /1A 14 hours ( 9 hours of continuous use )
Size / Weight
Length : 149.5mm (without the pen cap) Thickness : 11mm / 15.6g (without the pen cap)
Use environment Storage temperature : -10~50°C / Relative humidity : ~90% / Operating temperature : 10~35°C
Ink refills
D1 type
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver.
· Consult the dealer or an experienced radio/TV technician for help. Caution THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. IMPORTANT NOTE : FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PRODUCT WARRANTY
Please contact the store where you purchased the product or NeoLAB Convergence for customer service / support.
Model Name Product No(Serial No.)
Purchase Date Seller
NWP-F45
Keep the product no. (serial no.) in a safe place as it is required for checking the product warranty period when requesting customer service / support. The product no. is attached on the surface of the product package.
NEO SMARTPEN R1
LED()
Neo Smartpen R1
Quick Guide
Neo Studio 2 &
APP APP
/FP4UVEJP
GPS
/
, LED1,
2, LED
20,
(APP) ,
,
10,
APP APPAPP APP, LED
2040 (90)
APP
, , , , , , NeoLAB, ,
SMARTPEN NWP-F45 Bluetooth 5.0(BLE) / 2402MHz~2480MHz Li-polymer 180mAh / 3.7Vdc 2MB memory 5Vdc / 1A 14(9)
: 149.5mm() / : 11mm, 15.6g ()
(): -10~50°C / : ~90% /
(): 10~35°C
D1 type
SMARTPEN
45
/PUFt&YDFFEJOHXUuBOEtFYDFFEJOHXUuJOEJDBUFUIBUUIFQFSDFOUBHFDPOUFOUPGUIF
SFTUSJDUFETVCTUBODFFYDFFETUIFSFGFSFODFQFSDFOUBHFWBMVFPGQSFTFODFDPOEJUJPO
999999999
NeoLAB Convergence
NWP-F45
, ,
3
NEO SMARTPEN R1
LED( )
Neo Smartpen R1
Quick Guide
SMARTPEN
Neo Studio 2 &
/FP4UVEJP(PPHMF1MBZ4UPSF"QQ4UPSF /FP4UVEJP
/FP4UVEJP
/
LED 2LED 20 () 10
#MVFUPPUI(14()
-&%
90-20+40
LED
HP ( HP)
NWP-F45 Bluetooth 5.0(BLE) / 2402MHz~2480MHz 180mAh / 3.7Vdc 2MB memory 5Vdc / 1A 14 (9)
149.5mm() / 11mm / 15.6g()
(): -10~50°C / : ~90% /
: 10~35°C
D1
1. supportjp@neolab.co.jp NeoLAB Convergence
2. (1) (2) (3) (4) (5) (6) (7) (8) (9)
(10) (11)
3.
4.
5. ()
6.
7.
SMARTPEN
TEL
-
-
: NeoLAB 107-0062 7-4-18 NCN 3F
NEO SMARTPEN R1
LED
Neo Smartpen R1
Quick Guide
/FP4UVEJP
-&% -&%
rsr(14
s
-&%
-&%
0/
-&%
0''
_
NWP-F45 Bluetooth 5.0(BLE) / 2402MHz~2480MHz Li-polymer 180mAh / 3.7Vdc 2MB memory 5Vdc / 1A
149.5mm
11mm, 15.6g
-10~50 ~90% 10~35
D1 type
"4 23
_ _
"4
1588-6239
/&04."351&/3
4FSJBM/P
4FSJBM/P
"4
NWP-F45
Adobe Illustrator 28.5 (Macintosh) 3-Heights™ PDF Optimization Shell 6.3.1.5 (http://www -tools.com)