Polk SR1 Wireless Surrounds

Introduction & Support

Thank you for your Polk purchase. If you have a question or comment, please feel free to call or email us.

What's in the Box

The following items are included:

• ?(2) SR1 Wireless Surrounds: Two compact, rectangular speakers with rounded edges, each featuring a Polk logo on the front grille.
• ?(2) Surrounds Power Supply: Two black power adapters with cables, each terminating in a small connector.
• Product Literature: Includes a Quick Start Guide, registration card, and wall mounting template.

Setup: Connecting to Your Surround Speakers

Follow these steps to connect your SR1 Wireless Surrounds:

1. 1. Placing or Mounting the Surrounds

   Place the surround speakers on the left and right sides, equidistant from the main listening position. Ensure the speaker marked "L" is on the left and the speaker marked "R" is on the right. If you choose to mount the surrounds, refer to the provided wall mounting template for detailed instructions.

   Diagram: A TV is shown above a soundbar. Two speakers labeled 'L' and 'R' are positioned on the left and right sides, respectively, relative to the listening area.

2. 2. Connecting the Surrounds to an AC Outlet

   Plug each surround speaker into a standard AC power outlet. A flashing green light will be visible on the back of the surrounds until they are manually synced with the soundbar and subwoofer.

   Diagram: An AC outlet symbol is shown connected via a power adapter to a speaker. An arrow indicates the connection.

3. 3. Verifying Your Connections

   Turn on your TV and soundbar. Verify that you are seeing video and hearing sound from the soundbar. If you do not hear sound and no lights are visible on the front of your soundbar, press the power button on the soundbar to turn it on.

   ?Note: If you are hearing sound from both your TV and your soundbar, you must manually turn off your TV speakers using the Settings Menu on your TV. Please refer to your TV's owner's manual for instructions.

4. 4. Syncing the Surround Speakers to the Soundbar

   ⚠️Note: You must sync BOTH surround speakers AND the subwoofer.

   Sync the Subwoofer

   1. Press the power button on the soundbar to turn it on.
   2. On the back of the SOUNDBAR, press and hold the SYNC button until you hear a tone (about 3-4 seconds), then release the button. The SUB and SURR lights above the SYNC button will flash green.
   3. On the back of the SUBWOOFER, press and hold the SYNC button until you hear a tone (about 10 seconds) and the light on the back of the subwoofer turns solid green.

   Sync the Surround Speakers

   4. On the back of EACH of the SURROUND SPEAKERS, press and hold the SYNC button until the light on the bottom of the speaker turns solid green (about 10 seconds).
   5. When BOTH LEFT and RIGHT surround speakers are paired to the bar, you will hear a tone from the bar.

   ⚠️NOTE: If you hear a two-note descending tone from the bar, syncing failed. Please try again.

Remote Control

The remote control allows you to manage various functions of your Polk audio system.

• Power On/Off ?
• Mute ?
• HDMI Inputs (1, 2, 3) ?
• TV Input ?
• AUX Input
• Bluetooth® ?
• Bass Up/Down ?
• Master Volume Up/Down ?
• VoiceAdjust Up/Down ?️
• Movie Mode ?
• Sport Mode ⚽
• Music Mode ?
• Back ⏪
• Forward ⏩
• Play/Pause ▶️ / ⏸️
• Surround Balance (Left/Right) - Available when wireless surrounds are used.
• Surround Volume Up/Down - Available when wireless surrounds are used.

Visual Indicators

The front of the soundbar contains a horizontal row of lights that provide status indications, such as source, volume, and listening modes.

• Front of Soundbar Lights: Indicate source selection (HDMI 1, HDMI 2, HDMI 3, HDMI ARC, OPTICAL, AUX), power status (ON), content type (DOLBY CONTENT, DTS CONTENT), and modes (NIGHT MODE, BLUETOOTH, CHROMECAST BUILT-IN).
• Back of Bar Indicators: Wi-Fi status (OFF, NOT CONNECTED, SOLID CONNECTED, FLASHING PAIRING MODE), SUB status, SURROUNDS status.
• Back of Subwoofer Indicators: SUB status.
• Back of Surround Speakers Indicators: SURROUNDS status.

Optimizing Your Surround Speakers

Adjust the volume and balance of your surround speakers for the best listening experience.

• Volume Control

  Easily adjust the volume of the surround speakers for more or less impact.

• Balance Control

  Easily adjust the balance of the surround speakers based on your listening position.

Wall Mounting

A wall mounting template is provided for wall mounting the SR1 Wireless Surround Speakers. For proper installation, please refer to the instructions printed on the template. Screws for attaching the surrounds to the wall are not included. Choose the screw type and length appropriate to your home's construction. If in doubt, consult a professional.

Troubleshooting

I Don't Hear Sound from my Surround Speakers

1. Verify that the left and right surround speakers are plugged into a power source.
2. Check the green light on the back of each speaker:
   • If it is solid green, turn up the Surround Volume using the remote control.
   • If it is flashing green, you need to sync the surround speaker to the soundbar using the instructions in the 'Setup' section.

Product Information, Specifications, and Features

The Polk SR1 Wireless Surrounds are designed to enhance your MagniFi MAX sound bar system.

Specifications

Features

• Upgrade Polk MagniFi MAX to True 5.1 Surround Sound: Create an immersive, multi-dimensional 5.1 surround sound experience.
• Easy Wireless Setup: Plug in speakers and use one-button control to wirelessly link them to your MagniFi MAX sound bar system.
• Easy Placement: Wall-mount or place on any tabletop. Left/right balance control allows for asymmetrical placement.
• Customize Volume and Balance: Maximize your surround sound experience using the MagniFi MAX remote.
• All-Stereo Mode: Easily play stereo content like music through the speakers.
• Compatible with All Sound Modes: Works with Dolby and DTS, plus Polk Movie, Sport, Music, and Night Modes.
• Adjustable Wall-Mounting: Includes built-in keyhole slots and threaded insert for aftermarket brackets.

Important Product Information

This section covers important product details, including model names and safety information.

Product Names: Polk, MagniFi MAX™, MagniFi MAXSR™, SR1 Wireless Surrounds™

Safety Precautions and Compliance

Please read and follow all safety instructions to ensure safe operation and compliance with regulations.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting or relocating the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer or technician.

FCC RF Radiation Exposure Statement

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC RF Warning

This equipment must be installed and operated according to provided instructions, ensuring at least 20 cm separation from all persons. End-users and installers must follow antenna installation instructions and operating conditions for RF exposure compliance.

IC RF Radiation Exposure Statement

This device complies with Canada's portable RF exposure limits for an uncontrolled environment. Further RF exposure reduction can be achieved by keeping the product as far as possible from the user's body or setting the device to a lower output power if available.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003. To reduce potential radio interference, antenna type and gain should be chosen such that the equivalent isotropically radiated power (e.i.r.p.) is not more than permitted for successful communication.

This device complies with Industry Canada licence-exempt RSS standard(s). It may not cause interference and must accept any interference, including interference that may cause undesired operation.

Radio Frequency (RF) Exposure Information

The radiated output power of this Wireless Device is below Industry Canada (IC) radio frequency exposure limits. The device should be used to minimize potential human contact during normal operation. This device has also been evaluated and shown compliant with IC RF Exposure limits under mobile exposure conditions (antennas greater than 20cm from a person's body).

Operating Frequency Bands: 2.412-2.472GHz, 5.15-5.25GHz (restricted to indoor use only).

Slave Equipment

This device is slave equipment, not radar detection, and not ad-hoc operation in the DFS band.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and where they exit the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug damage, liquid spillage, objects fallen into the apparatus, exposure to rain or moisture, abnormal operation, or dropping.
15. The equipment can be used at a maximum ambient temperature of 45 degrees C.
16. Do not open the equipment to reduce the risk of electrical shock. For safety reasons, it is only allowed to be opened by qualified service personnel.
17. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
18. The AC inlet is used as the disconnect device and shall remain readily operable.
19. The product shall be used on an open bench.
20. No naked flame sources, such as lighted candles, should be placed on the apparatus.
21. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
22. The battery (or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire, or the like.
23. WARNING: If the battery compartment does not close securely, stop using the product and keep it away from children and pets.
24. WARNING: Do not recharge non-rechargeable batteries.
25. WARNING: Avoid exposure to extreme heat or cold.

WARNING: Please refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

Warranty Information

1-Year Limited Warranty

Polk Audio, LLC warrants its branded wireless speakers to be free from defects in materials and workmanship for a period of one year from the date of purchase, under normal use and conditions. Polk will, at its option, repair or replace defective products. If a model is unavailable, Polk may replace it with a current model of equal or greater value.

To obtain warranty service, visit www.polkaudio.com or contact Polk Audio Customer Service at 1-800-377-7655. Proof of purchase (original receipt or bill of sale) is required. Ship the product, prepaid and insured, to Polk Audio, 1 Viper Way, Vista, CA 92081.

This warranty is non-transferable and void if the product is modified, used contrary to its purpose, has an altered serial number, or was purchased from an unauthorized dealer. It is also void if damaged by accident, unreasonable use, neglect, improper service, or causes not arising from material or construction defects. Cosmetic damage, paint damage, or consequential damages are not covered.

Polk does not warrant uninterrupted or error-free operation. External conditions beyond Polk's control may affect performance. Polk reserves the right to alter, change, or discontinue access to third-party content or providers.

This warranty grants specific legal rights, and you may have other rights that vary by state. All other warranties, including implied warranties of merchantability and fitness for a particular purpose, are expressly excluded to the maximum extent allowed by law. Polk's maximum liability shall not exceed the purchase price of the product.

DTS Information: For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, and DTS Digital Surround are registered trademarks or trademarks of DTS, Inc.

Product Registration

Register your new Polk product online for a chance to win $500 of Polk product!

www.polkaudio.com/registration

Benefits

• Permanent record of your purchase.
• Entry into a monthly FREE drawing for $500-worth of Polk speakers.
• Enrollment in Club Polk Benefits, including:
  • Informative Polk website forums
  • Special discounts in the Polk web store
  • Advance notice of Polk promos
  • Discounts on authorized Polk parts
  • Latest news and announcements about your product.

No Internet Access? Call Polk Customer Service at 1-800-377-7655 (US & Canada only) or +410-358-3600 (outside US & Canada).

Polk takes your privacy seriously and does not share or sell information to third parties unless directed by court order. Registering your product does not affect your warranty.

Questions? Concerns? Contact Polk Customer Service from 9am - 5:30pm, M-F, EST (USA): 1-800-377-7655 (US & Canada only) | 410-358-3600 (outside US & Canada) | polkcs@polkaudio.com

Model: SR1 WIRELESS SURROUNDS

Serial #: AM8419092007635

Registration information is also available in French, Spanish, German, and Italian.