Globe Electric 44621 Semi-Flush Mount Light Fixture
Model: 44621
Made in China
Before Getting Started
Read all instructions carefully before assembly.
Use caution when opening the package with sharp tools to avoid damaging components.
Keep packaging materials and hardware away from children.
Assemble in a clean, level, spacious area on a soft surface.
Ensure all parts are present before assembly.
Lift with care and assemble near the final location.
Do not overtighten screws to prevent thread damage.
Place the assembled product on a flat surface; ensure stability before use.
Keep children away from the product during assembly and use.
⚠️ DANGER: Risk of suffocation from packaging materials.
Cleaning & Maintenance
Keep the fixture away from direct heat and sunlight to prevent damage or fading.
Regular vacuuming or light brushing removes dirt and prevents wear.
Periodically check and tighten screws (every 90 days).
Lamp Care Instructions
Read instructions before assembly and use.
⚡️ Caution: Risk of electric shock. Disconnect power before assembly or cleaning.
Turn off, unplug, and cool the bulb before replacement or cleaning.
Use a soft, clean, dry cloth for cleaning.
Use only the recommended bulb type and wattage to prevent fire hazards.
Electrical Installation
Ensure the wall switch is in the "OFF" position.
Turn off the main power or the specific circuit breaker for the fixture's location.
(Refer to Fig. 1: Wall switch, Fig. 2: Breaker panel, Fig. 3: Fuse box for power disconnection methods.)
CAUTION: Apply silicone caulking around the canopy-wall junction to prevent water ingress into the outlet box.
Recommendation: Consult a qualified electrician to verify the branch circuit conductor.
Contents
Verify package contents:
- A: Fixture Canopy/Base (x1)
- B: Shade (x1)
- C: Mounting Screws (x1)
- D: Wire Connectors (x3)
- E: Mounting Bracket (x2)
- F: Socket Ring (x1)
- G: E26 Medium Bulb, 60W Max (? x1)
Assembly Instructions
- Attach the mounting bracket (E) to the junction box using screws.
- Connect the electrical wires using wire connectors (D): house wires to fixture wires (e.g., black to black, white to white, ground to ground).
- Secure the fixture canopy (A) to the mounting bracket.
- Attach the shade (B) to the fixture and secure it with the socket ring (F).
- Install the bulb (G).
