EasySMX 9124 Game Controller Manual

Introduction

Welcome to the EasySMX 9124 Game Controller Manual. This guide will help you understand and utilize all the features of your new controller.

Product Overview

The EasySMX 9124 is a versatile wireless game controller designed for a wide range of platforms including PC, Nintendo Switch, PlayStation 4, PlayStation 3, Android, and iOS devices. It features dual vibration motors for immersive gameplay, programmable back buttons for custom control, and a turbo function for rapid inputs.

Key Features:

• Multi-platform compatibility
• Dual vibration feedback
• Programmable M1-M4 buttons
• Adjustable turbo function
• Adjustable vibration intensity
• LED indicator lights
• Ergonomic design

Controller Layout

The controller features a standard gamepad layout:

• Top: Left Shoulder Button (L1), Left Trigger (L2), Right Shoulder Button (R1), Right Trigger (R2).
• Front: Directional Pad (D-pad: Up, Down, Left, Right), Left Analog Stick, Action Buttons (A, B, X, Y), Right Analog Stick, Home Button ?, View/Share Button ?️, Menu/Options Button ☰, Capture/Screenshot Button ?.
• Back: Four programmable buttons (M1, M2, M3, M4), Reset Button ⚙️.
• Bottom: USB-C Port ?.
• Indicators: Multiple LED indicators for connection status, battery level, and function modes.

Product Specifications

Connection Modes

Connecting to Mobile Devices (Android/iOS)

• Android: For the first connection, press and hold the HOME button and the A button simultaneously. LED 1 will light up. Then, enable Bluetooth on your Android device and search for "EasySMX 9124" to connect.
• iOS: For the first connection, press and hold the HOME button and the X button simultaneously. LED 2 will light up. Then, enable Bluetooth on your iOS device and search for "EasySMX 9124" to connect.

Connecting to PC

• Wired Connection: Connect the controller to your PC using the included USB-C cable. LED 1 will light up, indicating a successful connection.
• Wireless (2.4G) Connection: Plug the included 2.4G wireless receiver into a USB port on your PC. Press and hold the HOME button and the B button simultaneously. LED 3 will light up, indicating a successful connection.

Light Management

You can adjust the LED brightness of the controller. Press and hold the HOME button and the R3 (Right Analog Stick Click) button together. Cycle through the brightness levels: Off, Low, Medium, and High.

Turbo Key Settings

The turbo function allows for rapid button presses.

• Activate Turbo: Press and hold the desired button, then press the TURBO button. The corresponding LED will flash, indicating the turbo function is active for that button.
• Deactivate Turbo: Press and hold the button with the turbo function enabled, then press the TURBO button again.
• Clear All Turbo Functions: Press and hold the HOME button and the TURBO button simultaneously for 3 seconds. All turbo functions will be cleared.

Key Programming Settings (M1-M4 Buttons)

The four buttons on the back of the controller (M1, M2, M3, M4) can be programmed with custom button combinations.

• To Program: Press and hold the HOME button and the desired M button (M1, M2, M3, or M4). LED 1 will start flashing. Press the button or combination of buttons you wish to map to the M button. Press the same M button again to save the mapping.
• To Clear Programming: Press and hold the HOME button and the desired M button (M1, M2, M3, or M4) for 3 seconds. The programming for that button will be cleared.

Vibration Adjustment

You can adjust the intensity of the controller's vibration feedback.

• Press and hold the HOME button and the UP or DOWN buttons on the D-pad to cycle through vibration intensity levels: 0%, 25%, 50%, 75%, and 100%.
• LED 4 will indicate the current vibration level.

Charging

Connect the controller to a power source using the included USB-C cable. LED 4 will flash during charging and remain solid when the controller is fully charged.

Reset Controller

If the controller becomes unresponsive or experiences issues, you can reset it. Use a thin object (like a paperclip) to press the small reset button located on the back of the controller.

Troubleshooting

Controller not connecting: Ensure Bluetooth is enabled on your device and the controller is in the correct pairing mode. Try re-pairing the controller. For wired connections, ensure the USB cable is securely connected.

Buttons not responding: Check if the controller is charged. Try resetting the controller. Ensure no custom programming is interfering.

Vibration not working: Verify that vibration is enabled and set to a level above 0% in the vibration adjustment settings.

Alternate Services

For further assistance or to provide feedback, please contact EasySMX customer support:

• Email: support@easysmx.com
• Website: www.easysmx.com

You can also visit dreadwiki.hijumpboots.com for additional information.