EasySMX M15 Bluetooth Controller User Manual

Overview

This document provides instructions and information for the EasySMX M15 Bluetooth controller.

Controller Diagram

The M15 controller features the following components:

• 1. Left Joystick
• 2. D-pad
• 3. Left Shoulder Button (L1)
• 4. Left Trigger Button (L2)
• 5. Home Button
• 6. Share Button
• 7. Minus Button (-)
• 8. Turbo Button
• 9. Right Shoulder Button (R1)
• 10. Right Trigger Button (R2)
• 11. Plus Button (+)
• 12. Menu Button
• 13. Right Joystick

Connection Methods

1. Bluetooth Connection

To connect via Bluetooth:

1. Press and hold the Home button for 3 seconds to turn on the controller. The indicator light will flash rapidly.
2. Press and hold the Home button for 5 seconds to enter Bluetooth pairing mode. The indicator light will flash slowly.
3. Turn on Bluetooth on your device (e.g., PC, Switch, Android phone, iOS phone).
4. Search for "M15" and click to connect.
5. The indicator light will turn solid blue when connected.

2. Wired Connection

Use the provided USB-C cable to connect the controller directly to your device. The controller will be recognized automatically.

Device Specific Connections

Switch Console Connection

1. Turn on the Switch console.
2. Navigate to Controllers > Change Grip/Order.
3. Follow the Bluetooth connection steps above (press and hold Home button for 3s to power on, 5s for pairing).
4. The controller will automatically pair with the Switch console, and the indicator light will turn solid.

PC Connection

Bluetooth: Follow the general Bluetooth connection steps. Note: Some PCs may require a Bluetooth adapter.

Wired: Use the USB-C cable to connect to your PC. The controller will be recognized automatically as a gamepad.

Android/iOS Connection

Follow the general Bluetooth connection steps. For iOS devices, some games may not support controllers or may require specific settings.

Indicator Light Status

• Solid Blue: Connected
• Flashing Blue (rapid): Power on / Connecting
• Flashing Blue (slow): Pairing mode
• Solid Red: Charging
• Red light off: Fully charged

Controller Features

Turbo Function

To enable Turbo for a button (e.g., A button):

1. Press and hold the desired button (e.g., A).
2. Press and hold the Turbo button. The indicator light will flash rapidly, confirming Turbo is set for that button.

To disable Turbo for a specific button, repeat the same steps.

The Turbo function can be applied to A, B, X, Y, L1, R1, L2, R2, and D-pad directions (Up, Down, Left, Right).

Vibration Function

The controller features built-in dual motors for vibration feedback. Vibration intensity is not adjustable.

Specifications

Troubleshooting

• Controller not connecting: Ensure the controller is charged. Try re-pairing. Verify Bluetooth is enabled on your device.
• Controller not recognized: Use a different USB-C cable. Restart your device. Update device drivers.
• Buttons not working: Check if Turbo function is active. Reset the controller by holding the Home button for 10 seconds.

Precautions

• Avoid extreme temperatures or humidity.
• Do not disassemble or modify the controller.
• Keep away from liquids.
• Clean with a dry, soft cloth.

Package Contents

• 1 x M15 Bluetooth Controller
• 1 x USB-C Cable
• 1 x User Manual

Support and Warranty

For assistance, visit www.easysmx.com or email support@easysmx.com.

EasySMX offers a 12-month limited warranty. Details are available on the website.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE Marking

This product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Additional Information

[QR Code] Scan this code to download the user manual or visit www.easysmx.com.

Brand: EasySMX