Hama Projection Alarm Clock "Plus Charge"
Model: 00 186332
Brand: Hama
Controls and Displays
Diagram Description: The device features a digital display on the front showing time, date, day of the week, temperature, and humidity. A projection arm extends from the top, designed to project the time onto a surface. The rear and sides house various control buttons and ports, including a power supply socket, battery compartment, and USB charging port.
Main Unit Controls and Displays:
- 1. Display: Shows time, date, day of the week, temperature, humidity, and alarm status.
- 2. Time: Displays the current time.
- 3. Radio symbol: Indicates the status of the radio-controlled time signal reception.
- 4. Alarm symbol 1: Indicates if Alarm 1 is active.
- 5. Alarm symbol 2: Indicates if Alarm 2 is active.
- 6. Date: Displays the current date.
- 7. Day of the week: Displays the current day of the week.
- 8. Room temperature: Shows the current room temperature.
- 9. Room humidity: Shows the current room humidity.
- 10. Projection arm: Adjustable arm to direct the time projection onto a surface.
- 11. SNOOZE/LIGHT button: Activates the backlight for approximately 8 seconds or stops the alarm for 5 minutes.
Rear/Side Controls:
- 12. TIME button: Enters Time mode for setting the clock.
- 13. ALARM button: Enters Alarm mode for setting alarms.
- 14. UP button: Increases the current set value or switches between 12 and 24-hour format.
- 15. DOWN button: Decreases the current set value or switches between 12 and 24-hour format.
- 16. WAVE button: Activates/deactivates manual radio signal reception.
- 17. ON/OFF switch for alarm 1: Enables or disables Alarm 1.
- 18. ON/OFF switch for alarm 2: Enables or disables Alarm 2.
- 19. ROTATE button: Rotates the projection by 0°, 90°, 180°, or 360°.
- 20. Power supply unit connection socket: Port for connecting the AC adapter.
- 21. Battery compartment: Slot for backup batteries.
- 22. USB charging port: Port for charging external devices.
Explanation of Warning Symbols and Notes
Risk of electric shock: [!] This symbol indicates product parts energized with a dangerous voltage of sufficient magnitude to constitute a risk of electric shock.
Warning: [!] This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note: [i] This symbol is used to indicate additional information or important notes.
Package Contents
- "Plus Charge" projection alarm clock
- Power supply unit
- These operating instructions
Safety Notes
General Safety:
- The product is intended for private, non-commercial use only.
- Use the product for its intended purpose only.
- Protect the product from dirt, moisture, and overheating, and only use it in a dry environment.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Keep this product, as all electrical products, out of the reach of children!
- Do not operate the product outside the power limits given in the specifications.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not use the product in moist environments and avoid splashes.
- Do not place the product near interference fields, metal frames, computers, TVs, etc. Electronic devices and window frames can negatively affect the product’s functionality.
- Do not drop the product and do not expose it to any major shocks.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
Risk of Electric Shock:
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, adapter cable, or power cable is damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Warning – Batteries:
- When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
- Only use batteries (or rechargeable batteries) that match the specified type.
- Before you insert the batteries, clean the battery contacts and the polar contacts.
- Do not allow children to change batteries without supervision.
- Do not mix old and new batteries or batteries of a different type or make.