TV2 TV SPEAKER BASE WITH BLUETOOTH
Quick Start Guide
Placement
TV2 is designed to be placed under your TV. The TV must have a base no wider than 550mm (21.5") and no deeper than 300mm (12") and must weigh no more than 30kg (66lbs). If the TV base is too large to fit, place TV2 on a lower shelf of your TV rack.
Diagrams illustrate the TV2 speaker base positioned beneath a television, showing its dimensions relative to the TV's stand and indicating placement on a lower shelf if the TV stand is too wide or deep.
Bluetooth Set-up
TV2 is equipped with Bluetooth to allow wireless playback from any Bluetooth equipped phone, tablet or computer.
- Select the Bluetooth input ? on the remote.
- To connect a Bluetooth device to TV2, press and hold the pairing button [Pairing button] and the Blue LED ? will blink.
An illustration shows a remote control with two highlighted buttons on the left side: one with a Bluetooth symbol (?) for selecting the input, and another with an 'S' symbol ([Pairing button]) for initiating pairing. The TV2 speaker base is depicted with a blue LED light flashing (?), indicating it is in pairing mode.
Consult the instructions of the Bluetooth device to connect to TV2. Successful pairing will be signalled by a 'beep' from the unit and the Blue LED ? will stop flashing.
Once paired, music from your device will play through the unit. To add another Bluetooth device, repeat from step 2. TV2 will store up to 8 paired devices in memory.
TV Connections
Only one audio connection to your TV is required, in order of preference:
- Optical: If available on your TV, use this for best quality.
- RCA: Connect both left and right channels to your TV.
- AUX 3.5mm: Connect to the headphone output of your TV.
Note: If the 3.5mm socket is used, it takes priority over the RCA input which will be muted.
A diagram of the rear panel of the TV2 speaker base displays connection ports labeled 'Audio In L/R', 'AUX In', and 'Optical In'. It shows examples of how an optical cable and a 3.5mm AUX cable can be connected to a TV, with an 'OR' indicator suggesting alternative connections. The diagram also shows the power input '+24V DC 2.5A'.
Learning your TV remote
Remove the fabric grille and locate the control panel. Follow the instructions, remembering to point your TV remote at the control panel whilst learning.
An illustration shows the front control panel of the TV2 speaker base, featuring buttons for 'Learn', 'Vol+', and 'Vol-'. Accompanying diagrams detail the sequence for programming TV remote volume controls. Step 1 shows 'Learn' → 'Vol+' → 'Vol+ on TV remote'. Step 2 shows 'Learn' → 'Vol-' → 'Vol- on TV remote'. A note indicates 'Learn (2secs)' for a long press.
TOP TIPS
Auto power down
To save power, TV2 will automatically turn off after a few seconds if no sound is playing from your TV.
Auto Power On
When you turn on your TV, TV2 will detect the sound and automatically turn on.
Sound Modes
There are 4 different modes that can be selected to enhance your sound experience:
- TV: Greatly improved TV sound
- Music: Enhances stereo music and music videos.
- Film: Designed to get the best sound from movies.
- Voice: Enhances voices to improve intelligibility.
To talk to us, call +44 (0)203 514 1521 (UK Local) or 1-877-357-8204 (USA).
Cambridge Audio
GREAT BRITISH SOUND SINCE 1968
