User Guide
AX1500 Wi-Fi 6 Portable Router
Model: TL-WR1512X
Brand: TP-Link
FCC Compliance Information Statement
Product Name: AX1500 Wi-Fi 6 Portable Router
Model Number: TL-WR1512X
Component Name | Model |
---|---|
I.T.E. Power | DSA-18QFB FUS A |
Responsible Party: TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
"To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
TP-Link Systems Inc. has determined that the equipment shown complies with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment, and the equipment is properly maintained and operated.
Issue Date: 2025-03-24
EU Declaration of Conformity
[CE Logo]
OPERATING FREQUENCY (maximum transmitted power)
- 2400 MHz - 2483.5 MHz (20dBm)
- 5150 MHz - 5250 MHz (23dBm)
- 5250 MHz - 5350 MHz (23dBm)
- 5470 MHz - 5725 MHz (30dBm)
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863.
The original EU declaration of conformity may be found at: https://www.tp-link.com/en/support/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when used at 20 cm from your body.
National Restrictions
Frequency band: 5150 - 5250 MHz:
- Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted.
- Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band.
Frequency band: 5250 - 5350 MHz:
- Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.
Frequency band: 5470 - 5725 MHz:
- Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.
UK Compliance
[UKCA Logo]
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at: https://www.tp-link.com/support/ukca
National Restrictions
Attention: This device may only be used indoors in Great Britain.
[UK Flag Symbol]
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The transmitter/receiver exempt from license contained in this apparatus complies with the CNR of Innovation, Sciences and Economic Development Canada applicable to radio apparatus exempt from license. Operation is authorized under the following two conditions:
- The apparatus must not produce interference;
- The apparatus must accept any radio interference suffered, even if the interference is likely to compromise its operation.
Industry Canada Statement
CAN ICES-003 (B)/NMB-003(B)
Radiation Exposure Statement (IC)
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
French Translation: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Other Compliance Notices
Korea Warning Statements
This wireless equipment may cause radio interference during operation.
NCC Notice & BSMI Notice
Chinese Notice: 取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
English Translation: Low-power radio-frequency equipment that has obtained the type-approval certificate shall not be altered in frequency, increased in transmitting power, or changed in original characteristics or functions by companies, businesses, or users without permission.
Safety Information
[EAC Logo]
Ukrainian Certification: Product certified in accordance with the system of UkrSEPRO for compliance with the requirements of regulatory documents and requirements stipulated by current legislative acts of Ukraine.
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
- Do not use a damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Use only power supplies which are provided by the manufacturer and in the original packing of this product. If you have any questions, please contact TP-Link.
- Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
- This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.
Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Chinese Safety Instructions:
- Do not use a damaged charger or USB cable to charge the device.
- Do not use chargers other than those recommended.
- The adapter should be installed near the equipment and be easy to operate.
- Operating Temperature: 0°C~40°C (32°F~104°F)
Explanations of Symbols on the Product Label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.
General Symbols
Symbol | Explanation |
---|---|
⛑️ | Class II equipment |
⛑️ | Class II equipment with functional earthing |
~ | Alternating current |
-- | Direct current |
[DC Polarity] | Polarity of d.c. power connector |
[Indoor Use Only] | For indoor use only |
⚡ | Dangerous voltage |
⚠ | Caution, risk of electric shock |
VI | Energy efficiency Marking |
⏚ | Protective earth |
⏚ | Earth |
[Chassis Symbol] | Frame or chassis |
⏚ | Functional earthing |
⚠ | Caution, hot surface |
⚠ | Caution |
[Manual Icon] | Operator's manual |
⏻ | Stand-by |
⏼ | "ON"/"OFF" (push-push) |
[Fuse Icon] | Fuse |
N | Fuse is used in neutral N |
♻️ | RECYCLING. This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. The user has the choice to give their product to a competent recycling organization or to the retailer when they buy a new electrical or electronic equipment. |
[Volume Icon] | Caution, avoid listening at high volume levels for long periods |
[Power Icon] | Disconnection, all power plugs |
m | Switch of mini-gap construction |
μ | Switch of micro-gap construction (for US version) |
μ | Switch of micro-gap / micro-disconnection construction (for other versions except US) |
ε | Switch without contact gap (Semiconductor switching device) |
RoHS Compliance Statement (Restricted Substances)
Chinese Title: 產品標籤上符號的解釋 (Explanation of Symbols on the Product Label)
Note: Product labels can be found on the bottom of the product and its I.T.E. power supply. Symbols may vary by product.
Chinese Title for RoHS: 限用物質含有情況標示聲明書 (Statement on the Content of Restricted Substances)
Equipment name | Type designation (Type) | Restricted substances and its chemical symbols | |||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AX1500 Wi-Fi 6 Portable Router | TL-WR1512X | ||||||||||||||||||||||||||||||||||||
|
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: ✔️ indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: The "-" indicates that the restricted substance corresponds to the exemption.