Harman Kardon Onyx
Quick Start Guide
Getting Started
Welcome to your Harman Kardon Onyx speaker. This guide provides essential steps to set up and start enjoying your audio experience.
Connecting Your Device
Power: Press the power button [power-symbol] for 1 second to turn the speaker on or off. A long press of 3 seconds ensures a full shutdown.
Battery Status: The battery level indicator [battery-icon] displays the remaining power.
Bluetooth Pairing:
- Press the Bluetooth button [bluetooth-icon] for 0.5 seconds to activate pairing mode.
- On your device (smartphone, tablet, etc.), select 'ONYX' from the list of available Bluetooth devices.
Auxiliary Input: Connect your audio source directly using a standard auxiliary (Aux) cable.
WPS Setup:
- Press and hold the WPS button [wps-icon] on the speaker for 2.5 seconds.
- Initiate WPS pairing on your Wi-Fi router.
H/K Remote App
Enhance your experience by downloading the H/K Remote app from the App Store [app-store-icon] or Google Play [google-play-icon]. The app offers advanced control and features.
Technical Specifications
| Specification | Details |
|---|---|
| Number of Channels | 4 |
| Transducers | 2 x 3" woofers, 2 x 3/4" tweeters, 2 x passive radiators |
| Bi-amplification | 4 x 15W |
| Maximum SPL | 95dB @ 1m |
| Power Requirement | 100-240V AC, 50/60Hz |
| Power Adaptor | 19V, 3.0A |
| Built-in Battery | 11.1V, 2500mAh Lithium |
| Power Consumption | 57W maximum, <1W standby |
| Speaker Impedance | 4 ohm per speaker |
| Frequency Response | 60Hz-20kHz |
| Frequency Range | 2402MHz~2480MHz |
| Transmitter Power | <4dBm |
| Modulation | GFSK/1/4-DQPSK/8-DPSK |
| Wireless Connectivity | DLNA, AirPlay, Bluetooth 3.0 A2DP v1.3 AVRCP v1.5 |
| Dimensions (Dia x W x H) | 345mm x 222mm x 325mm |
