Harman Kardon Onyx Studio 7
Quick Start Guide
Welcome
This guide provides essential information to help you set up and enjoy your Harman Kardon Onyx Studio 7 portable Bluetooth speaker.
Safety First
Before using this product, please read the safety sheet carefully. Ensure you understand all safety precautions.
Getting Started
Power and Charging
Connect the speaker to a power source using the provided power cord. Note that the power cord quantity and plug type may vary by region.
Status Indicators
- ? Low battery
- ? Charging in progress
- ? Charging complete
Rebooting the Speaker
To reboot the speaker, press and hold the power button for more than 10 seconds.
Connecting via Bluetooth
The Onyx Studio 7 supports Bluetooth connectivity for wireless audio streaming. The effective range is up to 10 meters (33 feet).
Pairing Your Device
- Enable Bluetooth on your device.
- Search for 'HK Onyx Studio 7' and connect.
- The status will indicate 'Bluetooth connected'.
A maximum of 2 devices can be connected simultaneously.
Bluetooth Connection Status
- Bluetooth connecting
- Bluetooth connected
- Bluetooth not connected
Wireless Dual Sound
Pair two Onyx Studio 7 speakers together for a more immersive audio experience using the Wireless Dual Sound feature.
Pairing Mode
To enter Wireless Dual Sound pairing mode, press and hold the Bluetooth button for over 5 seconds. Additional speakers are sold separately.
Controlling Playback
Control playback on the primary speaker. Supports Left & Right stereo pairing.
Music Playback Controls
Use the controls on the speaker to manage your music:
- Press once: ▶️ Play/Pause music.
- Press twice: ⏭️ Skip to the next track.
Music playback pauses on the current connected device when you start music playback on a second connected device.
Audio Cable Connection
You can also play music through an audio cable (AUX input). To use the audio cable, disconnect Bluetooth.
Technical Specifications
Feature | Specification |
---|---|
Bluetooth Version | 4.2 |
Supported Profiles | A2DP 1.3, AVRCP 1.6 |
Transducers | Woofer: 1 x 120mm, Tweeters: 2 x 25mm |
Rated Power | 1 x 50W RMS Bi-amp (AC mode) |
Frequency Response | 50Hz - 20kHz (-6dB) |
Signal to Noise Ratio | 80dB A-weighted |
Power Supply | 19V/2A |
Battery Type | Lithium-ion (3.6V/3250mAh, 11.70Wh) |
Battery Charge Time | 5 hours |
Music Playtime | Up to 8 hours (Varies by volume level and music content) |
Bluetooth Transmitter Power | < 9dBm (EIRP) |
Bluetooth Transmitter Frequency Range | 2400-2483.5MHz |
Bluetooth Transmitter Modulation | GFSK, π/4 - DQPSK, 8DPSK |
Dimensions (H x W x D) | 268.00 x 302.50 x 159.50mm |
Weight | 3295g |
Battery Care
If the speaker is not used for a long period, recharge the battery at least once every 3 months. Battery life varies with usage and environmental conditions.
Regulatory Information
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
This product complies with relevant regulatory standards, including ANATEL certification (Brazil), EAC, and CE marks.