APP Quick Start Instruction Manual

Customer Service

Our friendly customer service team is here to help. You can connect with us through the following channels:

• [Lifetime technical support]
• ? www.iscooterglobal.com
• [Facebook] www.facebook.com/iScooterGlobal
• ✉️ support@iscooterglobal.com

Thank you for your support.

Package Contents

When unboxing your i9 electric scooter, please verify that the below items are included in the package. If anything is missing or damaged, please contact iScooter customer service for support at support@iscooterglobal.com.

• 1 x Charger
• 4 x Screws
• 1 x Allen Wrench

Control Panel

Tips

When the scooter starts to coast, place both feet on the deck and press the accelerator. The accelerator engages once the coasting speed exceeds 3 mph. Alternatively, connect the "MiniRobot" APP and enable the zero-start feature.

Power Button

Click to turn on. Long press to turn off.

Battery Indicator

The power level is indicated by five battery bars on the control panel.

Light

Turn on your scooter with a single click to toggle the front light on/off.

Mode

Double-click to switch between power modes.

Cruise Control

Maintain the same speed for 3 seconds; the scooter will beep and activate cruise control.

Lock Indicator

The scooter can be locked and unlocked via the MiniRobot app.

Charging

• Your scooter is fully charged when the LED light on the charger changes from red to green.
• The scooter has charging protection, and charging will automatically cut off after a full charge.
• It is not recommended to charge your scooter for more than 24 hours continuously.
• Do not connect the charger if the charging port is wet.
• Keep the charging port closed when not charging.

First Ride

Download the "MiniRobot" app from the App Store (iPhone) or Google Play (Android phone) for more information and functions.

[QR Code for App Download]

When the scooter starts to coast, place both feet on the deck and press the accelerator. The accelerator engages once the coasting speed exceeds 3 mph. Alternatively, connect the "MiniRobot" APP and enable the zero-start feature.

Riding Basics

Safety First

⚠️ Wear helmets and knee pads in case of falls and injuries when learning to ride the scooter.

Step 1: Power On

Turn the power on and check the electricity indicator.

Step 2: Propel

Stand on the deck with one foot and propel yourself with the other foot.

Step 3: Accelerate

When the scooter starts to coast, place both feet on the deck and press the accelerator. The accelerator engages once the coasting speed exceeds 3 mph.

Step 4: Brake

Release the accelerator for the kinetic energy recovery system (KERS) to initiate automatic slow braking. Squeeze the brake lever for a sudden brake.

Step 5: Turn

Tilt your body in the steering direction as you turn, and slowly turn the handlebar.

Riding Notice

The iScooter i9 electric scooter is a leisure device. When used in public areas, it is subject to vehicle regulations and risks. For your safety, please follow instructions in this manual and applicable traffic laws and regulations.

• Respect pedestrians' Right of Way. Avoid startling them, especially children. When riding from behind pedestrians, ring your bell to alert them and slow down to pass on their left (applicable where vehicles drive on the right). When crossing pedestrian areas, keep to the right at a low speed or dismount.
• Closely follow the safety instructions in this manual. iScooter is not liable for any financial losses, physical injuries, accidents, legal disputes, or other conflicts resulting from actions that violate user instructions.
• Check the scooter before every use. If you notice loose parts, low battery alerts, excessive wear, strange sounds, or malfunctions, stop riding.

⚠️ WARNING – Risk of Fire – No User Serviceable Parts.

Folding and Carrying

Folding

Make sure the scooter is turned off. To fold, unlock the folding mechanism, and bend the handlebar stem to hook the buckle on the rear fender.

Unfolding

To unfold, press the bell trigger to release from the buckle, erect the handlebar, and lock the folding structure.

Disc Brake Adjustment

Adjusting Sensitivity

You need the Allen wrench to loosen the screw on the rocker.

• If the disc brake is too sensitive: Rotate the disc brake rocker down a bit. Then, reinstall the screw back to the brake cable core to tighten.
• If the disc brake cannot stop: Rotate the disc brake rocker up a bit. Then, reinstall the screw back to the brake cable core to tighten.

Notice: The disc brake may squeak when in use until it is broken in. This is normal and does not affect the brake's function or performance.

Removing Disc Brake Noise

First, make sure the scooter is turned off. For easier operation, place the scooter on a desk.

• Loosen two screws on the pump (not the screw on the rocker).
• Adjust the position of the disc brake pump to ensure the brake disc is in the middle of the two brake pads.
• Keep the brake disc and brake pad from touching each other.
• Hold the disc brake pump in the desired position, then retighten the screws to the pump.

Daily Care and Maintenance

Cleaning and Storage

If you see stains on the scooter's body, wipe them off with a damp cloth. If stains won't scrub off, use some toothpaste and a toothbrush, then wipe with a damp cloth.

Notes:

• Do not clean the scooter with alcohol, gasoline, kerosene, or other corrosive and volatile chemical solvents to prevent damage.
• Do not wash the board with a high-pressure water spray. Ensure the scooter is turned off, the charging cable is unplugged, and the rubber flap is closed during cleaning to prevent water leakage, which may result in electric shock or other major problems. When the scooter is not in use, keep it indoors where it is dry and cool.
• Do not put it outdoors for a long time. Excessive sunlight, overheating, and overcooling accelerate the battery pack's lifespan.

Battery Maintenance

1. Use original battery packs; using other models or brands may bring about safety issues.
2. Do not touch the contacts. Do not dismantle or puncture the casing. Keep contacts away from metal objects to prevent short circuits, which may result in battery damage or even injuries and deaths.
3. Use the original power adapter to avoid potential damage or fire.
4. Mishandling of used batteries can cause tremendous harm to the environment. To protect the natural environment, please follow local regulations for proper disposal of used batteries.
5. After every use, fully charge the battery to prolong its lifespan.

Storage and Disposal

1. Please store the scooter in a cool and dry place between 14°F and 104°F (-10°C and 40°C). In extremely humid environments, the interior of the scooter may suffer condensation or water accumulation, which can damage the battery rapidly. Devices are not intended for use at elevations greater than 2000 m above sea level. Prolonged exposure to UV rays, rain, and the elements may damage the enclosure materials. Store indoors when not in use.
2. In daily use, try to avoid recharging the scooter after completely exhausting the battery. If the battery is low, charge it as soon as possible.
3. Please charge the scooter every other month to preserve the battery.

Specifications

Notes:

1. The height of the body: Distance from the ground to the highest end of the body.
2. Description of the battery life: It is measured under the condition of full charge, a load of 150 lb (68kg), at 77°F (24°C), on a flat road without wind, and at a speed of 9.3 mph. The real battery life will differ with different factors of the load, humidity, wind speed, and operation habits.
3. The maximum allowable weight shall be kept within 264 lb (120kg) (driver and objects included) in any case. Consider extra weight from clothes or other accessories during the trip and the gravity generated by speed; the scooter will not support it if this load limit is exceeded.

Question & Answer

1. What if the E-Scooter arrived with a missing accessory or broken part?

A: Please take a photo and send it to the iScooter Support Team via email: support@iscooterglobal.com. The iScooter Support Team will reply promptly and arrange for the correct accessory or part replacement.

2. Is the tire replaceable and how to replace the tire?

A: Yes, the tire is replaceable. Please contact the iScooter support team for more information or search for the video "How to replace the pneumatic tire" on YouTube.

3. What if the rear disc brake of the scooter doesn't work well?

A: You may contact us for instructions on brake adjusting, or search "How to adjust rear brake of scooter" on YouTube for a tutorial video.

4. What should I do when I hear an unusual noise coming from the rear wheel?

A: It usually means your disc brake is tilted, causing friction noise. Please refer to the Disc Brake Adjustment page. If the problem persists, please contact us for help.

5. Why does the screen return an error code?

A: If you see any error code below, please contact the iScooter Support Team to resolve the error code.

• E04: Short Circuit Failure
• E10: Controller/Instrument Communication Failure
• E11: Motor Phase A Current Sensor Failure
• E12: Motor Phase B Current Sensor Failure
• E13: Motor Phase C Current Sensor Failure
• E14: Accelerator Failure
• E15: Brake Failure
• E16: Motor Hall Failure

Contact Us

Contact us if you experience issues relating to riding, maintenance, safety, or errors/faults with your iScooter i9 electric scooter.

E-mail Service: support@iscooterglobal.com

Website: www.iscooterglobal.com