EU DECLARATION OF CONFORMITY
(No. VB_058f_HBDKNB2VWGG)
1. Radio Equipment:
Range hood
Brand: Gaggenau
2. Name and address of the manufacturer or his authorised representative:
BSH Hausgeräte GmbH, Carl-Wery-Straße 34, 81739 München, Germany
3. Declaration of Conformity Issuance:
This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration:
HBDKNB2VW *
* Number can be found on the rating plate. This number is the main identifier used in the technical documentation and should not be confused with the sales name.
5. Conformity with Union Harmonisation Legislation:
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
- 2014/53/EU
- 2011/65/EU
- (EU) No 66/2014
6. References to Harmonised Standards:
References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
- EN 301 893 V2.1.1:2017
- EN 300 328 V2.2.2:2019
- EN 301 489-1 V2.2.3:2019
- EN 301 489-17 V3.2.4:2020
- EN 62233:2008
- EN 60335-2-31:2014
- EN 60335-1:2012 +A11:2014+A13:2017 +A1:2019 +A2:2019+A14:2019+A15:2021
- EN 61000-3-3:2013
- EN 61000-3-2:2014
- EN 55014-2:2015
- EN 55014-1:2017+A11:2020
- EN IEC 63000:2018
- EN IEC 61591:2020 +A11:2020
7. Notified Body Information:
The notified body performed an intervention and issued the EU-type examination certificate:
VDE Prüf- und Zertifizierungsinstitut GmbH, NB 0366, Annex III, Module B, Art. 3.3 d, e
40060105
8. Description of Accessories and Components:
Description of accessories and components, including software which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:
Accessory: n/a
Software: n/a
9. Additional Information:
Method for testing in accordance with EN 55014-1 concerning emission testing 30 – 1.000 MHz: absorbing clamp measurement 30 - 300 MHz; FAR measurement 300 – 1000 MHz; 3m
Signed for and on behalf of:
BSH Hausgeräte GmbH
Name: Annette Haeusig
Function: Head of Development GDE-SVV
Date: 14. Juli 2025
Name: Thomas Modestou
Function: Head of Quality Management SBt-QM
Date: 14 July 2025
Place and date of issue: Bretten, see date of last signature