Assembly Instruction: Glass BISTRO Table FONTE - W
SKU: 60377954 | Item No: 144.307.02W
Parts List
| Part Label | Description | Quantity |
|---|---|---|
| A | Glass Tabletop | 1 PC |
| B | Table Legs | 4 PCS |
| C | Base Support | 2 PCS |
| D | Screws | 8 PCS |
| E | Washers | 8 PCS |
| F | Allen Key | 1 PC |
| G | Base Feet/Levelers | 4 PCS |
| H | Small Screws/Bolts | 8 PCS |
Assembly Steps
Step 1: Attach Legs to Base Supports
Take the Table Legs (B) and connect them to the Base Supports (C). Use the Screws (D) and Washers (E) for this connection, tightening them with the Allen Key (F). This forms the main leg structure.
Diagrammatic representation: Shows legs (B) being attached to base supports (C), secured by screws (D) and washers (E).
Step 2: Attach Base Structure to Tabletop
Align the assembled base structure with the underside of the Glass Tabletop (A). Secure the base to the tabletop using the Small Screws/Bolts (H). Ensure a firm connection.
Diagrammatic representation: Shows the base structure being attached to the glass tabletop (A) using screws (H). A close-up view details the screw and washer placement.
Step 3: Install Base Feet
Screw the Base Feet/Levelers (G) into the bottom of each table leg. These allow for adjustment to ensure the table is stable.
Diagrammatic representation: Shows the base feet (G) being screwed into the bottom of the table legs.
Step 4: Final Assembly Check
Carefully turn the table upright. Verify that all parts are securely fastened and the table stands level. The final diagram illustrates the completed Glass BISTRO Table FONTE - W.
Diagrammatic representation: Shows the fully assembled table.
