Ubio Labs Wireless Charging Pad
10W Fast Charge Qi Wireless Pad
Indicator LEDs
- Power on: LED indicator illuminates for one second and then turns off to indicate power is on.
- Charging a device: LED indicator blinks green until the device is removed.
- Fully charged device: LED indicator illuminates green until the device is removed.
- Foreign object detection: LED indicator blinks amber until a foreign object is removed.
Using the Wireless Pad
To set up and use the wireless pad:
- Plug the wireless pad into a power source using the included 9V wall charger.
- The LED indicator will illuminate for one second and then turn off, indicating power is on.
- The LED indicator will blink amber if a foreign object is detected on the charging surface.
Charging Your Device
To charge your device:
- Place your device on the center of the wireless pad.
- The LED indicator will blink green when your device is actively charging.
- The wireless pad is designed to provide optimal power delivery for compatible wireless devices.
- Supported Charging Speeds:
- 10W Qi certified fast charging for Samsung devices (e.g., S10e, S10, S10+, Note9, S9, S9+, Note8, S8, S8+).
- 7.5W Apple wireless charging for iPhone 8 and later models.
- 5W charging for other Qi-compatible wireless charging devices.
Wireless Pad Features
The wireless pad features a sleek design with an LED indicator for charging status, a DC power input port, and a dedicated Qi wireless charging surface.
Technical Specifications (Wireless Pad)
| Model | AWC1056 |
|---|---|
| Input | 9V DC / 1.5A |
| Output | Qi (10W / 7.5W / 5W) |
| Compatibility | iPhone®, Samsung®, other devices with wireless charging |
| Indicator | Green/amber LED indicator |
| Dimensions | 5.39 x 3.43 x 0.41 inches |
| Weight | 135g |
Wall Adapter Features
The included wall adapter is compact and features folding prongs for easy storage and portability, along with a 6-foot cable for convenient reach.
Technical Specifications (Wall Adapter)
| Model | CHG1045 |
|---|---|
| Input | AC 110-240V, 50-60 Hz |
| Output | 9V / 2A DC-DC |
| Dimensions | 1.96 x 1.7 x 1.02 inches |
| Weight | 76g |
Warranty
Ubio Labs is committed to designing and manufacturing products with superior performance and 100% customer satisfaction. All Ubio Labs products come with a 1-year limited warranty from the date of purchase.
Customer Support
DO NOT RETURN TO THE STORE. Our customer service team is available to assist you.
Model: WCB110
Website: www.ubiolabs.com
Email: support@ubiolabs.com
Phone: 1-866-642-4428 (Monday - Friday 9am - 4:30pm PST)
Address: Ubio Labs, Inc. | 2821 Northup Way, Suite 250 Bellevue, WA 98004
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
SAVE THESE INSTRUCTIONS
Important Safety Instructions
WARNING: When using this product, basic precautions should always be followed, including the following:
- Read all manufacturer's instructions before using this product.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not put fingers or hands into the product.
- Do not expose the wireless pad to moisture, rain, or snow.
- Use of a power supply or charger not recommended or sold by the wireless pad manufacturer may result in a risk of fire or injury to persons.
- Do not use the wireless pad in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury to persons.
- Do not disassemble the wireless pad. Take it to a qualified service person when service or repairs are required. Incorrect reassembly may result in a risk of fire or injury to persons.
- Do not expose the wireless pad to fire or excessive temperature. Exposure to fire or temperatures above 122°F (50°C) may cause explosion. The wireless pad's working temperature is ≤104°F (40°C).
- Have service performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Trademark Notices:
- iPhone is a registered trademark of Apple Inc.
- Samsung is a trademark of Samsung Electronics Co., Ltd.
- Qi and the Qi logo are trademarks of the Wireless Power Consortium.
FCC Regulatory Compliance
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Compliance: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
