Ubio Labs Power Bank
10,000mAh Slim Portable Battery
Features
The power bank is designed with the following features:
- Power Button: Used to check battery status.
- Type-C Input/Output: For charging the power bank and charging other devices.
- Type-C Indicator LED: Provides status for Type-C charging.
- Battery Capacity Indicator LEDs: Four white LEDs indicating battery charge level (25% increments).
- USB-A Indicator LED: Provides status for USB-A charging.
- USB-A Output: Standard USB port for charging devices.
The diagram illustrates the placement of these features on the device.
Technical Specifications
| Specification | Details |
|---|---|
| Model | PWB1071 |
| Cell Type | Lithium Ion Polymer, 10,000mAh |
| Input | Type-C 5V/2.4A |
| Output | USB-A 5V/2.4A, Type-C 5V/2.4A |
| Total Output | 4.8A/24W |
| USB Compatibility | Apple, Android, other devices with USB charging |
| Battery Indicators | 4 white LEDs, each indicating 25% capacity |
| Dimensions | 5.22 x 2.58 x 0.56 inches |
| Weight | 195g |
⚠️ ATTENTION PLEASE!
For optimal battery performance, please fully charge your Power Bank before use or storage.
?️ Warranty
Ubio Labs is dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All products come with a 1-year limited warranty from the date of purchase.
DO NOT RETURN TO THE STORE
Our customer service team is here to help.
Model: PBB154
Website: www.ubiolabs.com
Email: support@ubiolabs.com
Phone: 1-866-642-4428 (Monday - Friday 9am - 5pm PST)
Address: Ubio Labs, Inc. | 3006 Northup Way, Suite 101 Bellevue, WA 98004
FCC Compliance
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio or television reception. If interference occurs, the user is encouraged to try to correct it by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Charging The Power Bank
- Simply plug the power bank into a USB-A wall charger using the included Type-C cable.
- The LED indicators will blink, indicating the power bank is charging.
- When fully charged, all LED indicators will be illuminated.
- Fully charging your power bank should take approximately 3-4 hours using the Type-C port.
Please Note: The power bank can charge a device while it is also being charged. However, when charging a device simultaneously, the power bank will charge more slowly.
The diagram shows a wall charger connected via a Type-C cable to the power bank's Type-C port, illustrating the charging setup.
Charging Your Device
- Your power bank is compatible with most phones and tablets. Use your own charging cable to connect your device to the USB-A or Type-C output port to begin charging.
- When charging a device, the white LEDs will remain lit until the power bank runs out of power.
- To check the remaining battery capacity, briefly press the power button to illuminate the white battery indicator LEDs.
?️ SAVE THESE INSTRUCTIONS
Important Safety Instructions
WARNING - When using this product, basic precautions should always be followed, including the following:
- Read all manufacturer instructions before using this product.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not put fingers or hands into the product.
- Do not expose the power bank to moisture, rain, or snow.
- Use of a power supply or charger not recommended or sold by the power bank manufacturer may result in a risk of fire or injury to persons.
- Do not use the power bank in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury to persons.
- Do not use a power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not disassemble the power bank. Take it to a qualified service person when service or repairs are required. Incorrect reassembly may result in a risk of fire or injury to persons.
- Do not expose the power bank to fire or excessive temperature. Exposure to fire or temperatures above 122°F (50°C) may cause explosion. The power bank's working temperature is ≤104°F (40°C).
- Have service performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Switch off the power bank when not in use.
