Teamtex Type F9 Child Car Seat

Safety Instructions

WARNING: Please read these instructions carefully before using the seat and keep this guide for future reference. Failure to comply with these instructions may compromise your child's safety.

• Only install your Group 2-3 booster seat on a forward-facing seat equipped with a 3-point seat belt (1).
• The rigid and plastic parts of the child restraint system must be positioned and installed so they do not get trapped under a movable seat or in the vehicle door during normal use.
• Ensure all straps used to attach the restraint system to the vehicle are kept tight, and adjust the straps that hold the child. Straps must not be twisted.
• The lap belt must be worn as low as possible to keep the pelvis securely in position.
• Replace the restraint system if it has been subjected to violent shocks in an accident.
• It is dangerous to modify or add to the system without authorization, or to not scrupulously follow the manufacturer's installation instructions.
• Keep the seat out of direct sunlight to prevent the child from getting burned.
• Never leave a child unattended in a child restraint system.
• Ensure luggage and other items that could cause injury in an accident are securely stowed away.
• Do not use the child restraint system without its cover.
• Only replace the seat cover with one recommended by the manufacturer, as it directly affects the restraint system's performance.
• If you have any doubts regarding installation or correct usage, please contact the manufacturer of the child restraint system.
• Install your child restraint system on seats categorized as "Universal" in your vehicle's manual.
• Do not use weight-bearing contact points other than those described in the instructions and marked on the restraint system.
• Always prioritize rear seats, even if the Highway Code allows front seat installation.
• Always ensure the vehicle's seat belt is fastened.
• In winter, avoid dressing the child in overly bulky clothing.

Your Group 2-3 Booster Seat (Type F9)

This seat is designed for children weighing 15 to 36 kg (approximately 3 to 12 years).

Components:

• 1. Height adjustable head support
• 2. Diagonal belt guide (x2)
• 3. Backrest
• 4. Seat base

In-car Installation

For Group 2-3, 15 to 36 kg (approx. 3 to 12 years).

Before installation, ensure the adjustable head support is set to your child's size. Your car seat is approved Group 2 and 3 with a backrest. Never remove the backrest, as it provides essential lateral protection.

Headrest Adjustment:

The adjustable head support is designed to grow with your child, providing maximum lateral protection. Position the belt guides of the headrest as close to your child's shoulders as possible (7, 8).

Installation Steps:

1. Place the car seat against the back seat of your vehicle (9).
2. Seat your child in the car seat.
3. Route the diagonal belt of the vehicle's seat belt through the headrest's belt guide and under the opposite armrest.
4. Route the lap portion of the vehicle's seat belt under both armrests of the car seat (10).
5. Fasten the vehicle's seat belt.
6. Ensure the seat belt is tight and not twisted.

Follow visual indicators for correct installation. Ensure the [OK] symbol is visible and the [NO] symbol is absent.

Optional Features

Cup Holder:

Slide the cup holder into the guides located on either side of the seat base (11). WARNING: Do not place heavy objects in the cup holder, as they could become dangerous projectiles in the event of an impact.

Manual Storage

Store the instruction manual in the designated compartment (12) for easy access.

Maintenance Advice

All textile parts are removable.

• For light stains, clean with a damp sponge and soapy water.
• Hand wash at 30°C in soapy water.
• Do not use bleach.
• Do not iron.
• Do not machine wash or tumble dry.

Compatibility and Approval

This car seat is a "Universal" child restraint system, approved according to regulation N°44/04. It is suitable for general use in vehicles and compatible with the majority of vehicle seats (some exceptions may apply).

Optimal compatibility is more likely if the vehicle manufacturer states that its vehicles are suitable for "Universal" child restraint systems.

This restraint system is classified as "Universal" according to the strictest approval criteria.

It is only suitable for vehicles equipped with 3-point seat belts (fixed or with a retractor mechanism) approved according to UN/ECE Regulation N°16 or an equivalent standard.

If in doubt, please contact the manufacturer or your retailer.