Quick Start Guide

Outdoor Security Wi-Fi Camera

This guide provides instructions for setting up your Tapo Outdoor Security Wi-Fi Camera.

Package Contents

• Camera
• Power Adapter
• Mounting Template
• Anchors
• Screws
• Waterproof Seal
• Waterproof Cable Attachments
• Quick Start Guide

Appearance

Front Panel

The front panel typically houses the camera lens and an IR LED for night vision.

Bottom Panel

The bottom panel usually contains ports for power and network connection, a reset button, and a speaker. It also features a slot for a microSD card for local storage.

System LED Description

Set Up Camera

STEP 1: DOWNLOAD APP

Get the Tapo app from the App Store or Google Play.

Scan the QR code to download the app.

[App Store] | [Google Play]

STEP 2: POWER UP

Plug in the power adapter to power up your camera.

STEP 3: SET UP

Tap the ⚙ button in the Tapo app and select your camera model. Follow the in-app instructions to complete the setup.

Wall Mounting Instructions

1. Drill Holes

Use the provided mounting template to mark the desired mounting location. Drill three screw holes according to the template.

2. Mount Camera

Insert the anchors into the drilled holes. Use the provided screws to affix the camera securely over the anchors.

Note: After mounting, connect the camera to a power outlet using the provided power adapter.

Install Waterproof Cable Attachments

For outdoor installations, install the waterproof cable attachments for the network interface. Ensure all parts are securely attached and the waterproofing rings are flush to prevent water ingress.

Installation Steps:

1. Route the network cable through the fix nut, waterproof ring, and then the waterproof jacket in that order.
2. Insert the waterproof ring into the waterproof jacket.
3. Attach the O-ring to the network interface of the camera and connect the network cables.
4. Connect the network interface to the waterproof jacket and twist to lock. Rotate the fix nut to secure it to the waterproof jacket.

The network interface is now waterproof.

Install Waterproof Seal for Power Connectors

For outdoor installations, install the waterproof seal for the power connectors.

FAQ (Frequently Asked Questions)

Q1. What should I do if I fail to configure Tapo Camera?

Refer to the Tapo camera website or the Tapo app for troubleshooting steps. You can also follow the instructions provided by the manufacturer.

Q2. What should I do if the SD card is not working properly?

• Ensure you are using a microSD card.
• It is recommended to use a Class 10 microSD card or higher, with storage from 8 GB to 512 GB.
• Initialize the microSD card within the Tapo app.
• If the problem persists, contact technical support.

Q3. How do I reset the camera?

• Wi-Fi Reset: With the camera powered on, press and hold the Reset button for approximately 5 seconds until the System LED blinks red quickly. This resets Wi-Fi settings while keeping other configurations.
• Factory Reset: Press and hold the Reset button for 10 seconds to perform a factory reset. Alternatively, open the Tapo app, navigate to Camera Settings, and remove the camera to factory reset it.

For more questions, please refer to TP-Link FAQ.

For technical support, user guides, and more information, please visit Tapo Support.

Safety Information

• Do not use a damaged charger or USB cable to charge the device.
• Use only the recommended chargers.
• Do not use the device in locations where wireless devices are not permitted.
• Ensure the power adapter is easily accessible.
• Use only power supplies provided by the manufacturer and included in the original product packaging.
• Keep the device away from fire or hot environments. Do not immerse in water or any other liquid.
• Do not disassemble, repair, or modify the product.
• Do not use the product if the casing is broken, as this poses a risk of electric shock.
• Never touch the product with wet hands.
• Avoid placing the device near automatically controlled devices such as fire alarms, as radio waves may cause malfunctions.
• Observe restrictions on using wireless products in fuel depots, chemical plants, or during blasting operations.
• Do not use liquid to clean the product; use only a dry cloth.
• Never insert metal objects into the product. If a metal object enters the product, turn off the circuit breaker and contact an authorized electrician.
• This product is not intended for use during medical care. Consult the manufacturer of personal medical devices (e.g., pacemakers, hearing aids) to determine if they are adequately shielded from external RF energy.
• Do not use this product in healthcare facilities, as equipment there may be sensitive to external RF energy.
• Do not place heavy objects on top of the product.
• Unplug the product from the power outlet when leaving it unused for an extended period.
• This product may interfere with other electronic devices such as TVs, radios, computers, and phones.
• Operating Temperature: -20°C to 45°C (-4°F to 113°F).

Please read and follow the safety information provided. TP-Link is not liable for accidents or damage resulting from improper use. Use this product with care and at your own risk.

Declarations of Conformity

TP-Link declares that this device complies with essential requirements and relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity can be found at TP-Link Support CE.

TP-Link declares that this device complies with essential requirements and relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity can be found at TP-Link Support UKCA.